Geschreven door studenten die geslaagd zijn Direct beschikbaar na je betaling Online lezen of als PDF Verkeerd document? Gratis ruilen 4,6 TrustPilot
logo-home
Tentamen (uitwerkingen)

NCCCO CORE Questions 100% Correct Answers Verified Latest 2024 Version

Beoordeling
-
Verkocht
-
Pagina's
11
Cijfer
A+
Geüpload op
03-07-2024
Geschreven in
2023/2024

NCCCO CORE Questions | 100% Correct Answers | Verified | Latest 2024 Version Before leveling a mobile crane on outriggers, an operator should ensure: - there is no weight of the crane bearing on any tires Operating a mobile crane with a long boom, on uneven ground, what support condition should be considered? - Keeping 90 degree angle between cylinder rod and pad What is the primary purpose fir a rooster sheave or auxiliary boom point sheave? - Separate the boom hoist lines How many randomly broken wires in a lay length must there be on a mobile cranes hoist line, before it should be removed from service? - 6 On a mobile crane, how many broken wires are permitted at the end connection of a pendent before it must be taken out of service? - 1 Type 1 rotation resistant hoist wire rope has a design factor of: - 5 to 1 How many randomly distributed broken wires in rotation- resistant hoist wire rope are considered for replacement? - 2 broken wires in 6 rope diameters The term net capacity is best defined by which of the terms listed below? - Gross capacity minus capacity deductions Mobile cranes that are set up on barges, shall have a list chart provided by which of the entities listed below? - Manufacturer When lifting loads on tires, mobile cranes are rated at what percentage of tipping? - 75%How does the effective weight of a slowed extension relate to the actual weight of the extension? - Higher than the actual weight. When load radius is between radii values, the operator must use the: - longer radius Why should only approved attachments or extra counterweights provided by the manufacturer be placed on the rear of the crane? - They could cause a backward stability problem. A mobile crane's jib is offset 15º versus its original 0º offset, but the boom angle remains unchanged. In this situation, the load radius: - increases Abruptly stopping a rapid swing on a long-boom mobile crane will produce what major effect? - Collapsing the boom. When determining the position to a mobile crane should be left in over night, when high winds in the forecast the operator should: - Follow the manufacturers recommendations. If a mobile crane is NOT set-up level and the operator swings the load from the high side to the low side, what effect will that have on the radius? - The radius increase. Increasing the distance from the crane's center of gravity to the tipping axis will have what effect on the mobile crane? - Decreases stability. Backward stability of a mobile crane is tested in which configuration listed below? - Basic boom at minimum angle with no load Deflection of the boom while operating a mobile crane will increase? - Load Radius (Swings out) A sudden start or stop of the hoisting function while operating a mobile crane can produce a: - dynamic load Before lifting an occupied personnel platform on a job site, which of the following applies? - Use 50% of rated capacity, Trial lift to anticipated weight, Ensure rigging dedicated to platform only.

Meer zien Lees minder
Instelling
Vak

Voorbeeld van de inhoud

NCCCO CORE Questions | 100% Correct
Answers | Verified | Latest 2024 Version
Before leveling a mobile crane on outriggers, an operator should ensure: - ✔✔there is no weight of the
crane bearing on any tires


Operating a mobile crane with a long boom, on uneven ground, what support condition should be
considered? - ✔✔Keeping 90 degree angle between cylinder rod and pad



What is the primary purpose fir a rooster sheave or auxiliary boom point sheave? - ✔✔Separate the
boom hoist lines


How many randomly broken wires in a lay length must there be on a mobile cranes hoist line, before it
should be removed from service? - ✔✔6


On a mobile crane, how many broken wires are permitted at the end connection of a pendent before it
must be taken out of service? - ✔✔1



Type 1 rotation resistant hoist wire rope has a design factor of: - ✔✔5 to 1


How many randomly distributed broken wires in rotation- resistant hoist wire rope are considered for
replacement? - ✔✔2 broken wires in 6 rope diameters


The term net capacity is best defined by which of the terms listed below? - ✔✔Gross capacity minus
capacity deductions


Mobile cranes that are set up on barges, shall have a list chart provided by which of the entities listed
below? - ✔✔Manufacturer



When lifting loads on tires, mobile cranes are rated at what percentage of tipping? - ✔✔75%

, How does the effective weight of a slowed extension relate to the actual weight of the extension? -
✔✔Higher than the actual weight.



When load radius is between radii values, the operator must use the: - ✔✔longer radius


Why should only approved attachments or extra counterweights provided by the manufacturer be
placed on the rear of the crane? - ✔✔They could cause a backward stability problem.


A mobile crane's jib is offset 15º versus its original 0º offset, but the boom angle remains unchanged. In
this situation, the load radius: - ✔✔increases


Abruptly stopping a rapid swing on a long-boom mobile crane will produce what major effect? -
✔✔Collapsing the boom.


When determining the position to a mobile crane should be left in over night, when high winds in the
forecast the operator should: - ✔✔Follow the manufacturers recommendations.


If a mobile crane is NOT set-up level and the operator swings the load from the high side to the low side,
what effect will that have on the radius? - ✔✔The radius increase.


Increasing the distance from the crane's center of gravity to the tipping axis will have what effect on the
mobile crane? - ✔✔Decreases stability.



Backward stability of a mobile crane is tested in which configuration listed below? - ✔✔Basic boom at
minimum angle with no load



Deflection of the boom while operating a mobile crane will increase? - ✔✔Load Radius (Swings out)


A sudden start or stop of the hoisting function while operating a mobile crane can produce a: -
✔✔dynamic load


Before lifting an occupied personnel platform on a job site, which of the following applies? - ✔✔Use 50%
of rated capacity, Trial lift to anticipated weight, Ensure rigging dedicated to platform only.

Geschreven voor

Vak

Documentinformatie

Geüpload op
3 juli 2024
Aantal pagina's
11
Geschreven in
2023/2024
Type
Tentamen (uitwerkingen)
Bevat
Vragen en antwoorden

Onderwerpen

$8.49
Krijg toegang tot het volledige document:

Verkeerd document? Gratis ruilen Binnen 14 dagen na aankoop en voor het downloaden kun je een ander document kiezen. Je kunt het bedrag gewoon opnieuw besteden.
Geschreven door studenten die geslaagd zijn
Direct beschikbaar na je betaling
Online lezen of als PDF

Maak kennis met de verkoper
Seller avatar
hov
1.0
(2)

Maak kennis met de verkoper

Seller avatar
hov State University Of West Georgia
Volgen Je moet ingelogd zijn om studenten of vakken te kunnen volgen
Verkocht
12
Lid sinds
2 jaar
Aantal volgers
3
Documenten
2125
Laatst verkocht
2 maanden geleden
Academic Avengers

Expert Verified Exams {Latest Versions} 99% Pass Rate

1.0

2 beoordelingen

5
0
4
0
3
0
2
0
1
2

Recent door jou bekeken

Waarom studenten kiezen voor Stuvia

Gemaakt door medestudenten, geverifieerd door reviews

Kwaliteit die je kunt vertrouwen: geschreven door studenten die slaagden en beoordeeld door anderen die dit document gebruikten.

Niet tevreden? Kies een ander document

Geen zorgen! Je kunt voor hetzelfde geld direct een ander document kiezen dat beter past bij wat je zoekt.

Betaal zoals je wilt, start meteen met leren

Geen abonnement, geen verplichtingen. Betaal zoals je gewend bent via iDeal of creditcard en download je PDF-document meteen.

Student with book image

“Gekocht, gedownload en geslaagd. Zo makkelijk kan het dus zijn.”

Alisha Student

Bezig met je bronvermelding?

Maak nauwkeurige citaten in APA, MLA en Harvard met onze gratis bronnengenerator.

Bezig met je bronvermelding?

Veelgestelde vragen