Introduction to power engineering and
its governance in Canada, Plant and Fire
Safety Questions 100% answered.
The pressure of a fully charged SCBA is about
A)24 MPa
B)1 atmosphere
C)31 MPa
D)3 MPa
E)20 MPa ANS - C
This group recommends updates to the learning materials of each class of Power Engineer, and the
criteria required to ensure a Power Engineer is properly qualified when a Certificate of Competency is
issued.
Select one:
a. ANSI
b. ACI
c. SOPEEC
d. IPECC
e. ASME ANS - D
What is one of the two main purposes of the CSA B-52 code?
Select one:
a. To promote uniform requirements among the provinces and territories
b. 2, 4
c. Terms and equipment relating to refrigeration and air conditioning equipment are defined.
,d. The various classifications of buildings and occupancies are listed and described with examples of
each classification given. ANS - A
A welder performance qualification test:
Select one:
a. Is a practical welding test
b. Must be completed immediately after the welder obtains a certificate of qualification.
c. Is only required by welders working on steel structures
d. Is only required once in a welder's career ANS - A
What ASME code contains Recommended Guidelines For The Care of Power Boilers?
Select one:
a. CSA B51.
b. ASME Section VII.
c. ASME Section I.
d. CSA B52. ANS - B
The investigation of an accident involving a power plant:
Select one:
a. may be carried out by the Chief Inspector of the jurisdiction.
b. Is not specified in a jurisdictional Act or Regulation .
c. Is not of concern to the Chief Inspector
d. Is clearly outlined in the Engineer's Regulations ANS - A
A Self-Contained Breathing Apparatus must have a capacity of at least
A)15 minutes
B)45 minutes
C)10 minutes
D)60 minutes
, E)30 minutes ANS - E
Before beginning to repair an electric motor-driven boiler feedwater pump, your safest action is to
A)station a person nearby
B)break apart the coupling
C)remove the fuses and tag the motor start button
D)open, lock and tag the main electrical breaker
E)open the main circuit breaker ANS - D
If the concentration of a fuel in air is below the flammable limit, the mixture
A)must have a source of ignition
B)will not burn rapidly
C)is said to be lean
D)can be called rich
E)is explosive ANS - C
Class D fires involve the combustion of
A)fuel oil and gasoline
B)live electrical equipment
C)combustible metals
D)de-energized electrical equipment
E)wood wastes and coal ANS - C
Halogenated agent extinguishers are primarily intended for use on
A)Class B and C fires only
B)Class B fires only
C)Class A, C and D fires only
D)Class D fires only
E)Class A and B fires only ANS - A