ISTQB Foundation Level CTFL_001 | 100%
Correct Answers | Verified 2024 Version
1.
Test objectives for systems testing of a safety critical system include completion of all outstanding defect
correction. Regression testing is required following defect correction at all test levels. Which TWO of the
following metrics would be MOST suitable for determining whether the test objective has been met?
A. Regression tests run and passed in systems testing
B. Incidents closed in systems testing
C. Planned tests run and passed in system testing
D. Planned tests run and passed at all levels of testing
E. Incidents raised and closed at all levels of testing
F. a and e
G. b and c
H. d and e
I. a and b - ✔✔A. Regression tests run and passed in systems testing
2.
Test script TransVal 3.1 tests transaction validation via screen TRN 003B. According to the specification
(PID ver 1.3 10b iv) the validation screen should not accept future dated transactions. Test script TransVal
3.1 passes. Test script eod 1.4 tests end of day processing and is run after the execution of TransVal 3.1
using data entered during that testWhich of the following is the BEST detail on an incident report?
A. Title. End of Day failure.. Reproducible. Yes. Description. Script eod 1.4 fails when the first transaction
of the day is a future dated transaction.Screen shot of the failure attached.
B. Title. Transaction input screen validation..Reproducible. Yes. Description. Script eod 1..4 fails .Screen
shot of the failure attached. Validation of transaction entryon screen TRN-003B should not allow future
dated transactions see PID ver 1.3 para 10b iv.
C. Title. Screen TRN-003B validation of transaction dat - ✔✔D. Title. Screen TRN-003B validation of
transaction date. Reproducible. Yes. Description. Script eod 1.4 fails when the first transaction of the day
is a future dated transaction. Screen shot of the failure attached. Validation of transaction entry on
screen TRN-003B should not allow future dated transactions see PID ver 1.3 para 10b iv.
,3.
Which TWO of the following test tools would be classified as test execution tools?
A. Test data preparation tools
B. Test harness
C. Review tools
D. Test comparators
E. Configuration management tools
F. a and b
G. c and d
H. c and e
I. b and d - ✔✔D. Test comparators
4.
Which of the following is a consideration when deploying test execution tools?
07/26/2017 - by Mod_GuideK0
Which of the following is a consideration when deploying test execution tools?
A. Data-driven testing cannot be used with test execution tools
B. Recorded manual tests may become unstable in use
C. Keyword-driven testing cannot be used with test execution tools
D. Expected results for tests are not required because the tool generates expected results - ✔✔B.
Recorded manual tests may become unstable in use
5.
Which of the following is a valid reason for writing test cases based on experience and intuition?
A. Use of formal techniques requires expensive training
B. Only experience can ensure all functionality is covered
C. Tests based on experience and intuition can supplement formal techniques
D. Formal techniques require the use of expensive tools - ✔✔C. Tests based on experience and intuition
can supplement formal techniques
,6.
Which of the following test design techniques is classified as a structure-based (white box) technique?
A. Exploratory testing
B. Decision table testing
C. State transition testing
D. Statement testing - ✔✔D. Statement testing
7.
Why is independent testing important?
A. Because independent testers make fewer assumptions than developers
B. Because independent testers are isolated from the development team
C. Because independent testers can verify assumptions made during specification and implementation of
the system
D. Because independent testers have a greater sense of responsibility for quality than developers - ✔✔C.
Because independent testers can verify assumptions made during specification and implementation of
the system
8.
Which statement BEST describes when test planning should be performed?
A. Test planning is performed only once, at the beginning of the life cycle, and generates a Master Test
Plan
B. Test planning is performed at the beginning of the life cycle and again at the beginning of test
execution
C. Test planning is performed at the beginning of the life cycle and again at every test level
D. Test planning is performed continuously in all life cycle processes and activities - ✔✔D. Test planning is
performed continuously in all life cycle processes and activities
9.
Which of the following factors will MOST affect the testing effort required to test a software product?
A. The number of staff available to execute tests
, B. The level of detail in the test plan
C. The requirements for reliability and security in the product
D. The test estimation method used - ✔✔C. The requirements for reliability and security in the product
10.
Which of the following metrics could be used to monitor progress along with test preparation and
execution?
A. The total number of tests planned
B. The total number of requirements to be tested
C. The failure rate in testing already completed
D. The number of testers used for test execution so far - ✔✔C. The failure rate in testing already
completed
11.
Which of the following would NOT be a typical target of testing support tools?
A. Automate activities that require significant resources when done manually
B. Automate activities that cannot be executed manually
C. Automate repetitive tasks
D. Automating repetitive inspections - ✔✔D. Automating repetitive inspections
12.
What type of test design technique is the most effective in testing screen-dialog flows?
A. Use case testing
B. Boundary value testing
C. Statement testing and coverage
D. State transition testing - ✔✔D. State transition testing
13.
What content would be in an incident report if that incident report was based on the IEEE 829 Standard
for Software Test Documentation?
Correct Answers | Verified 2024 Version
1.
Test objectives for systems testing of a safety critical system include completion of all outstanding defect
correction. Regression testing is required following defect correction at all test levels. Which TWO of the
following metrics would be MOST suitable for determining whether the test objective has been met?
A. Regression tests run and passed in systems testing
B. Incidents closed in systems testing
C. Planned tests run and passed in system testing
D. Planned tests run and passed at all levels of testing
E. Incidents raised and closed at all levels of testing
F. a and e
G. b and c
H. d and e
I. a and b - ✔✔A. Regression tests run and passed in systems testing
2.
Test script TransVal 3.1 tests transaction validation via screen TRN 003B. According to the specification
(PID ver 1.3 10b iv) the validation screen should not accept future dated transactions. Test script TransVal
3.1 passes. Test script eod 1.4 tests end of day processing and is run after the execution of TransVal 3.1
using data entered during that testWhich of the following is the BEST detail on an incident report?
A. Title. End of Day failure.. Reproducible. Yes. Description. Script eod 1.4 fails when the first transaction
of the day is a future dated transaction.Screen shot of the failure attached.
B. Title. Transaction input screen validation..Reproducible. Yes. Description. Script eod 1..4 fails .Screen
shot of the failure attached. Validation of transaction entryon screen TRN-003B should not allow future
dated transactions see PID ver 1.3 para 10b iv.
C. Title. Screen TRN-003B validation of transaction dat - ✔✔D. Title. Screen TRN-003B validation of
transaction date. Reproducible. Yes. Description. Script eod 1.4 fails when the first transaction of the day
is a future dated transaction. Screen shot of the failure attached. Validation of transaction entry on
screen TRN-003B should not allow future dated transactions see PID ver 1.3 para 10b iv.
,3.
Which TWO of the following test tools would be classified as test execution tools?
A. Test data preparation tools
B. Test harness
C. Review tools
D. Test comparators
E. Configuration management tools
F. a and b
G. c and d
H. c and e
I. b and d - ✔✔D. Test comparators
4.
Which of the following is a consideration when deploying test execution tools?
07/26/2017 - by Mod_GuideK0
Which of the following is a consideration when deploying test execution tools?
A. Data-driven testing cannot be used with test execution tools
B. Recorded manual tests may become unstable in use
C. Keyword-driven testing cannot be used with test execution tools
D. Expected results for tests are not required because the tool generates expected results - ✔✔B.
Recorded manual tests may become unstable in use
5.
Which of the following is a valid reason for writing test cases based on experience and intuition?
A. Use of formal techniques requires expensive training
B. Only experience can ensure all functionality is covered
C. Tests based on experience and intuition can supplement formal techniques
D. Formal techniques require the use of expensive tools - ✔✔C. Tests based on experience and intuition
can supplement formal techniques
,6.
Which of the following test design techniques is classified as a structure-based (white box) technique?
A. Exploratory testing
B. Decision table testing
C. State transition testing
D. Statement testing - ✔✔D. Statement testing
7.
Why is independent testing important?
A. Because independent testers make fewer assumptions than developers
B. Because independent testers are isolated from the development team
C. Because independent testers can verify assumptions made during specification and implementation of
the system
D. Because independent testers have a greater sense of responsibility for quality than developers - ✔✔C.
Because independent testers can verify assumptions made during specification and implementation of
the system
8.
Which statement BEST describes when test planning should be performed?
A. Test planning is performed only once, at the beginning of the life cycle, and generates a Master Test
Plan
B. Test planning is performed at the beginning of the life cycle and again at the beginning of test
execution
C. Test planning is performed at the beginning of the life cycle and again at every test level
D. Test planning is performed continuously in all life cycle processes and activities - ✔✔D. Test planning is
performed continuously in all life cycle processes and activities
9.
Which of the following factors will MOST affect the testing effort required to test a software product?
A. The number of staff available to execute tests
, B. The level of detail in the test plan
C. The requirements for reliability and security in the product
D. The test estimation method used - ✔✔C. The requirements for reliability and security in the product
10.
Which of the following metrics could be used to monitor progress along with test preparation and
execution?
A. The total number of tests planned
B. The total number of requirements to be tested
C. The failure rate in testing already completed
D. The number of testers used for test execution so far - ✔✔C. The failure rate in testing already
completed
11.
Which of the following would NOT be a typical target of testing support tools?
A. Automate activities that require significant resources when done manually
B. Automate activities that cannot be executed manually
C. Automate repetitive tasks
D. Automating repetitive inspections - ✔✔D. Automating repetitive inspections
12.
What type of test design technique is the most effective in testing screen-dialog flows?
A. Use case testing
B. Boundary value testing
C. Statement testing and coverage
D. State transition testing - ✔✔D. State transition testing
13.
What content would be in an incident report if that incident report was based on the IEEE 829 Standard
for Software Test Documentation?
