Millwright Bearings Exam Questions With Correct Answers

Millwright Bearings Exam Questions With Correct Answers Two kinds of flat bearings differ from there housings they are A. Solid end of friction B. Tight and tapered C. Scored and roller D. Solid and split - ANSWER- D. Solid and split **The choice of bearing tens of the load rotational speed direction of Pull and support design solid bearings and split bearings are fiction bearings You can remove bearing cups from a housing using a cup puller (inside puller) provided that? a. it is a tapered roller bearing b. it is an anto froction bearing c. it is a bearing on a positive set d. the jaws can be inserted behind the shoulder - ANSWER- d. the jaws can be inserted behind the shoulder Main difference between adapter sleeve and withdrawal sleeve? - ANSWER- withdrawal sleeve used on solid bored bousing and adapter sleeve used on split bored housing A replacement bearing sucha s tapered roller or angular contact bearing has it end float controlled by? a. collar b. shaft shoulder c. chamfer d. shims - ANSWER- d. shims When installing a hot bearing on a shaft move it __________ into its final position. a. slowly b. in a rolling fashion c. clockwise d. quickly - ANSWER- d. quickly When mounting spherical roller bearings the first step is to? a. check the reduction is radial clearance of the bearing to ensure proper installed clearance exists b. check the reduction is radial clearance of the bearing to ensure proper installed clearance exists c. The outer face of the sleeve needs to be tapered d. check the initial clearance by inserting a feeler gauge between top rollers and outer ring e. check the initial clearance by inserting a feeler gauge between top rollers and inner ring - ANSWER- d. check the initial clearance by inserting a feeler gauge between top rollers and outer ring Mounted tapered Bore bearings using hydraulic nut--check the reduction is radial clearance of the bearing to ensure proper installed clearance exists