woodshop quiz
When do you turn a machine on? - CORRECT ANSWER-when you are ready, set up
properly and focused on what needs to be completed, safely.
What adjustment should be made to the drill press when using larger bits? -
CORRECT ANSWER-Use a slower speed
When using most machines you should make sure that the wood is? - CORRECT
ANSWER-Clear of imperfections, nails etc. for easier use
When using a table saw you should always? - CORRECT ANSWER-a. Keep you
hands at least 4 inches away from the blade
b. Never remove the blade guard, unless approved by the attendant
c. Use a push stick, for safety, when less than 4 inches away from the
blade
How do you decide the speed of the spindle sander? - CORRECT ANSWER-You
don't you have to get special instructions on its use
How much weight should you apply to the belt sander while sanding? - CORRECT
ANSWER-Just enough weight to hold the wood in place, safely
what tool is used to cut slots for biscuit joining? - CORRECT ANSWER-the biscuit
joiner
When cutting tight curves on the band saw, you should? - CORRECT
ANSWER-Make relief cuts then remove the wood at a normal pace
Before making a cut on the table saw you should? - CORRECT ANSWER-a. Check
blade height is only 1/4 " above the cutting stock
b. Set the fence or push sled/tool
c. Make sure nobody is behind you
The planar is used to? - CORRECT ANSWER-Plane the wood to the desired
thickness
You should only plane off _______inches at a time on the planer? - CORRECT
ANSWER-1/16
When do you turn a machine on? - CORRECT ANSWER-when you are ready, set up
properly and focused on what needs to be completed, safely.
What adjustment should be made to the drill press when using larger bits? -
CORRECT ANSWER-Use a slower speed
When using most machines you should make sure that the wood is? - CORRECT
ANSWER-Clear of imperfections, nails etc. for easier use
When using a table saw you should always? - CORRECT ANSWER-a. Keep you
hands at least 4 inches away from the blade
b. Never remove the blade guard, unless approved by the attendant
c. Use a push stick, for safety, when less than 4 inches away from the
blade
How do you decide the speed of the spindle sander? - CORRECT ANSWER-You
don't you have to get special instructions on its use
How much weight should you apply to the belt sander while sanding? - CORRECT
ANSWER-Just enough weight to hold the wood in place, safely
what tool is used to cut slots for biscuit joining? - CORRECT ANSWER-the biscuit
joiner
When cutting tight curves on the band saw, you should? - CORRECT
ANSWER-Make relief cuts then remove the wood at a normal pace
Before making a cut on the table saw you should? - CORRECT ANSWER-a. Check
blade height is only 1/4 " above the cutting stock
b. Set the fence or push sled/tool
c. Make sure nobody is behind you
The planar is used to? - CORRECT ANSWER-Plane the wood to the desired
thickness
You should only plane off _______inches at a time on the planer? - CORRECT
ANSWER-1/16
