INDIANA FIRE FIGHTER MANDATORY TEST 2024/300+
EXAM QUESTION AND CORRECT VERIFIED/NEWEST
UPDATE SUMMER 2024-2025/ALREADY GRADED A+
The PASS will activate in what two modes? ANSWER>>>- Manual & motion-
activation
What are some contaminates that can get on our PPE? ANSWER>>>-
Carcinogens, Hydrocarbons, Blood-borne pathogens
The steel shank in turnout boots offers protection to what part of the foot?
ANSWER>>>- Bottom
When should a full inspection of your PPE take place? ANSWER>>>- After
every alarm, After cleaning, Prior to cleaning
While doffing . ANSWER>>>- Perform a quick inspection of any
component you feel you might have damaged or contaminated
The hood is to worn under the SCBA facepiece. ANSWER>>>- False
NFPA covers Structural PPE. ANSWER>>>- 1971
The three layers of the pants & coat ensemble are the heat-resistant layer, the
moister barrier, and the . ANSWER>>>- Thermal liner
The drag rescue device (DRD) in the turnout coat is designed for .
ANSWER>>>- Pulling a firefighter to safety on the floor or ground
,A signal that your gear is superheated is the . ANSWER>>>- Off-
gassing your PPE exhibits
When donning PPE . ANSWER>>>- Don your hood prior to
your coat
The drag rescue device (DRD) is suitable to attach a rope system for
lowering a fallen firefighter. ANSWER>>>- False
What level of hazmat protection does structural PPE provide? ANSWER>>>-
Level D
Which of the following are the three layers of Structural PPE? ANSWER>>>-
Outer Shell, Moisture barrier, Thermal barrier
What is the highest level of Hazmat PPE available? ANSWER>>>- Level A
Helmet face shields, or flip-downs, provide what level of eye protection?
ANSWER>>>- Secondary
When removing superheated gear, one step is to . ANSWER>>>- Open
your coat as wide as possible and roll the coat and SCBA out and off your
shoulders.
Most bunker boots are placed in pants for quick and efficient donning.
ANSWER>>>- True
Wildland & brush gear is the same as structural PPE. ANSWER>>>- False
When worn correctly, your offers the best protection against harm from the
forces and elements. ANSWER>>>- PPE
,Thermal Protective Performance for Structural PPE measures .
ANSWER>>>- The amount of heat transfer from one layer of the garment
to another.
What type on gear is designed for use in high angle, trench, or collapse rescue
situations? ANSWER>>>- Technical Rescue PPE
NFPA requires all PPE to be formally inspected, cleaned, and repaired, if needed,
a minimum of times a year to prevent the buildup of contaminates.
ANSWER>>>- Two
Before stowing your PPE ---- whether in locker, bag, or compartment on apparatus --
----
. ANSWER>>>- Make sure all components are completely dry
The chinstrap must be worn at all times, regardless of how the helmet is fitted to
the head. ANSWER>>>- True
When performing pick-head axe maintenance,
.............................................................................................................. ANSWER>>
>- Do
not over sharpen
When performing maintenance on bolt cutters…ANSWER>>>- Wipe
entire tool with light oil.
When performing maintenance on a flat-head axe,..ANSWER>>>- Remove all
paint from the axe head.
When using a chain saw to ventilate a roof, you should .................... ANSWER>>>-
Plunge the saw only a few inches into the material,
Bring saw to full RPM's before you plunge into the
material, Hold the saw in an almost vertical position.
, Reciprocating saws are generally used by firefighters for ................. ANSWER>>>-
Vehicle
and machinery extrication.
The recommended minimum distance that firefighters should maintain between
themselves and another firefighter operating a saw is . ANSWER>>>- 10 feet
The most important safety factor a saw operator must observe after cutting with a
rotary saw is . ANSWER>>>- Stop the blade from rotating.
By watching the discharge from the chainsaw, a firefighter can determine the
condition of the chain. If a firefighter sees dust when using a chainsaw, it means the
chain is . ANSWER>>>- Dull
When using a chain saw ti cut a ventilation hole, a firefighter should use the
o
f the chain. ANSWER>>>- Tip
A "live saw" means that the saw is . ANSWER>>>- Running
Cutting with an axe is as much as it is strength.
ANSWER>>>- Hand-eye coordination
Spreading your feet will help to . ANSWER>>>- Center your body
weight
Allow to do the work when using an axe. ANSWER>>>- The weight
of the axe
When swinging an axe, concentrate on . ANSWER>>>- Accuracy
Cutting, striking, pushing, pulling, and prying are all examples of
EXAM QUESTION AND CORRECT VERIFIED/NEWEST
UPDATE SUMMER 2024-2025/ALREADY GRADED A+
The PASS will activate in what two modes? ANSWER>>>- Manual & motion-
activation
What are some contaminates that can get on our PPE? ANSWER>>>-
Carcinogens, Hydrocarbons, Blood-borne pathogens
The steel shank in turnout boots offers protection to what part of the foot?
ANSWER>>>- Bottom
When should a full inspection of your PPE take place? ANSWER>>>- After
every alarm, After cleaning, Prior to cleaning
While doffing . ANSWER>>>- Perform a quick inspection of any
component you feel you might have damaged or contaminated
The hood is to worn under the SCBA facepiece. ANSWER>>>- False
NFPA covers Structural PPE. ANSWER>>>- 1971
The three layers of the pants & coat ensemble are the heat-resistant layer, the
moister barrier, and the . ANSWER>>>- Thermal liner
The drag rescue device (DRD) in the turnout coat is designed for .
ANSWER>>>- Pulling a firefighter to safety on the floor or ground
,A signal that your gear is superheated is the . ANSWER>>>- Off-
gassing your PPE exhibits
When donning PPE . ANSWER>>>- Don your hood prior to
your coat
The drag rescue device (DRD) is suitable to attach a rope system for
lowering a fallen firefighter. ANSWER>>>- False
What level of hazmat protection does structural PPE provide? ANSWER>>>-
Level D
Which of the following are the three layers of Structural PPE? ANSWER>>>-
Outer Shell, Moisture barrier, Thermal barrier
What is the highest level of Hazmat PPE available? ANSWER>>>- Level A
Helmet face shields, or flip-downs, provide what level of eye protection?
ANSWER>>>- Secondary
When removing superheated gear, one step is to . ANSWER>>>- Open
your coat as wide as possible and roll the coat and SCBA out and off your
shoulders.
Most bunker boots are placed in pants for quick and efficient donning.
ANSWER>>>- True
Wildland & brush gear is the same as structural PPE. ANSWER>>>- False
When worn correctly, your offers the best protection against harm from the
forces and elements. ANSWER>>>- PPE
,Thermal Protective Performance for Structural PPE measures .
ANSWER>>>- The amount of heat transfer from one layer of the garment
to another.
What type on gear is designed for use in high angle, trench, or collapse rescue
situations? ANSWER>>>- Technical Rescue PPE
NFPA requires all PPE to be formally inspected, cleaned, and repaired, if needed,
a minimum of times a year to prevent the buildup of contaminates.
ANSWER>>>- Two
Before stowing your PPE ---- whether in locker, bag, or compartment on apparatus --
----
. ANSWER>>>- Make sure all components are completely dry
The chinstrap must be worn at all times, regardless of how the helmet is fitted to
the head. ANSWER>>>- True
When performing pick-head axe maintenance,
.............................................................................................................. ANSWER>>
>- Do
not over sharpen
When performing maintenance on bolt cutters…ANSWER>>>- Wipe
entire tool with light oil.
When performing maintenance on a flat-head axe,..ANSWER>>>- Remove all
paint from the axe head.
When using a chain saw to ventilate a roof, you should .................... ANSWER>>>-
Plunge the saw only a few inches into the material,
Bring saw to full RPM's before you plunge into the
material, Hold the saw in an almost vertical position.
, Reciprocating saws are generally used by firefighters for ................. ANSWER>>>-
Vehicle
and machinery extrication.
The recommended minimum distance that firefighters should maintain between
themselves and another firefighter operating a saw is . ANSWER>>>- 10 feet
The most important safety factor a saw operator must observe after cutting with a
rotary saw is . ANSWER>>>- Stop the blade from rotating.
By watching the discharge from the chainsaw, a firefighter can determine the
condition of the chain. If a firefighter sees dust when using a chainsaw, it means the
chain is . ANSWER>>>- Dull
When using a chain saw ti cut a ventilation hole, a firefighter should use the
o
f the chain. ANSWER>>>- Tip
A "live saw" means that the saw is . ANSWER>>>- Running
Cutting with an axe is as much as it is strength.
ANSWER>>>- Hand-eye coordination
Spreading your feet will help to . ANSWER>>>- Center your body
weight
Allow to do the work when using an axe. ANSWER>>>- The weight
of the axe
When swinging an axe, concentrate on . ANSWER>>>- Accuracy
Cutting, striking, pushing, pulling, and prying are all examples of
