CA Crematory Manager's Test Exam
Question And Answers 2024
What does the timer do? - correct answers✅It shuts off
either the primary burner, or afterburner at a preset time
so that the operator doesn't have to shut them off
manually.
Name the 8 systems that have some kind of control,
either by the operator or by an automated programmer. -
correct answers✅1) Electric Activated Door Control
2) Blower
3) Combustion Burner
4) Afterburner
5) Timer
6) Temperature Controller/Indicator
7) Chart Reorder
8) Opacity Monitor
What is the next step after the 7 start-up steps? - correct
answers✅Use a cardboard roller to insert case into
primary chamber.
If repositioning is necessary, what body part is likely to
need to be moved, and to where? - correct
answers✅The trunk part of the torso or bone mass; to
directly over the flame of the burner.
,CA Crematory Manager's Test Exam
Question And Answers 2024
How cool should the primary chamber be before
attempting removal of cremated remains? - correct
answers✅Blow 400F
What are the two steps involved in processing cremated
remains? - correct answers✅1) Removal of foreign
objects
2) Reduction of particle size by grinding, crushing,
pulverizing, etc to consistency appropriate for disposition.
Name 7 types of foreign objects whose removal is
consistent with processing. - correct answers✅1)
Pacemakers
2) Prosthesis
3) Dental Gold
4) Jewelry
5) Mementos
6) Screw, nails, or staples
7) Casket hardware not previously removed.
6 step procedure for processing cremated remains -
correct answers✅1) Check processor for cleanliness
2) Remove foreign material from remains
, CA Crematory Manager's Test Exam
Question And Answers 2024
3) Retrieve ID disc
4) Place remains in processor and process
5) Brush all residue into catch tray
6) Take tray and tag to packaging table
Minimum thickness of plastic bag inside urn. - correct
answers✅2 mm
Where in urn should ID disc be placed? - correct
answers✅On plastic tie that closes bag inside.
What should be done if cremated remains do not fill urn
completely? - correct answers✅Fill the balance with
clean shredded paper.
If urn lid is not completely secure, what should be sured
to secure it? - correct answers✅Nylon filament tape.
List eight layers of material for packaged cremated
remains, from inside to outside. - correct answers✅1)
Cremated remains
2) Plastic bag
3) Identification disc
Question And Answers 2024
What does the timer do? - correct answers✅It shuts off
either the primary burner, or afterburner at a preset time
so that the operator doesn't have to shut them off
manually.
Name the 8 systems that have some kind of control,
either by the operator or by an automated programmer. -
correct answers✅1) Electric Activated Door Control
2) Blower
3) Combustion Burner
4) Afterburner
5) Timer
6) Temperature Controller/Indicator
7) Chart Reorder
8) Opacity Monitor
What is the next step after the 7 start-up steps? - correct
answers✅Use a cardboard roller to insert case into
primary chamber.
If repositioning is necessary, what body part is likely to
need to be moved, and to where? - correct
answers✅The trunk part of the torso or bone mass; to
directly over the flame of the burner.
,CA Crematory Manager's Test Exam
Question And Answers 2024
How cool should the primary chamber be before
attempting removal of cremated remains? - correct
answers✅Blow 400F
What are the two steps involved in processing cremated
remains? - correct answers✅1) Removal of foreign
objects
2) Reduction of particle size by grinding, crushing,
pulverizing, etc to consistency appropriate for disposition.
Name 7 types of foreign objects whose removal is
consistent with processing. - correct answers✅1)
Pacemakers
2) Prosthesis
3) Dental Gold
4) Jewelry
5) Mementos
6) Screw, nails, or staples
7) Casket hardware not previously removed.
6 step procedure for processing cremated remains -
correct answers✅1) Check processor for cleanliness
2) Remove foreign material from remains
, CA Crematory Manager's Test Exam
Question And Answers 2024
3) Retrieve ID disc
4) Place remains in processor and process
5) Brush all residue into catch tray
6) Take tray and tag to packaging table
Minimum thickness of plastic bag inside urn. - correct
answers✅2 mm
Where in urn should ID disc be placed? - correct
answers✅On plastic tie that closes bag inside.
What should be done if cremated remains do not fill urn
completely? - correct answers✅Fill the balance with
clean shredded paper.
If urn lid is not completely secure, what should be sured
to secure it? - correct answers✅Nylon filament tape.
List eight layers of material for packaged cremated
remains, from inside to outside. - correct answers✅1)
Cremated remains
2) Plastic bag
3) Identification disc
