SWT301-FALL23 (QUIZ TOTAL) Questions and Answrs
1. According to the ISTQB Glossary, regression testing is required for what purpose?
a.
To ensure that defects have not been introduced by a modification. b.
To motivate better unit testing by the programmers. c.
To verify the success of corrective actions. d.
To prevent a task from being incorrectly considered completed.: a. To ensure that
defects have not been introduced by a modification.
2. Ensuring that test design starts during the requirements definition phase is important to enable
which of the following test objectives?
a.
Finding defects through dynamic testing. b.
Finishing the project on time. c.
Gaining confidence in the system. d.
Preventing defects in the system.: d.
Preventing defects in the system.
3. What is beta testing? a.
Testing performed by product developers at the customer's location. b.
Testing performed by product developers at their own locations. c.
Testing performed by potential customers at the developers location. d.
Testing performed by potential customers at their own locations.: d. Testing performed
by potential customers at their own locations.
4. According to the ISTQB Glossary, a risk relates to which of the following? a.
Negative consequences that could occur. b.
Negative consequences for the test object. c.
Negative consequences that will occur.
, SWT301-FALL23 (QUIZ TOTAL) Questions and Answrs
d.
Negative feedback to the tester.: a. Negative
consequences that could occur.
5. What is the purpose of exit criteria? a.
To identify when a software system should be retired. b.
To define when a test level is complete. c.
To determine whether a test has passed. d.
To determine when a test has completed.: b. To define
when a test level is complete.
6. Match the following terms with corresponding definition: Error: a human
action that produces an incorrect result
7. Match the following terms with corresponding definition: Failure: deviation of the
software from its expected delivery or service
8. Match the following terms with corresponding definition: Fault: a
manifestation of an error in software
9. Match the following terms with corresponding definition:
Reliability: the probability that software will not cause the failure of the system for a specified
time under specified conditions
10. According to the ISTQB Glossary, the word 'bug' is synonymous with which of the
following words?
a. Mistake.
b.
Error.
c.
Incident. d.
Defect.: d.
Defect.
11. Which of the following is a MAJOR task of test planning? a.
Measuring and analyzing results. b.
, SWT301-FALL23 (QUIZ TOTAL) Questions and Answrs
Scheduling test analysis and design tasks. c.
, SWT301-FALL23 (QUIZ TOTAL) Questions and Answrs
Monitoring progress and test coverage. d.
Initiating corrective actions.: b. Scheduling test
analysis and design tasks.
12. Which of the following is a MAJOR task of test implementation and execu- tion?
a.
Assessing if more tests are needed. b.
Measuring and analyzing results. c.
Identifying test conditions or test requirements. d.
Reporting discrepancies as incidents.: d. Reporting
discrepancies as incidents.
13. Which is not a testing principle? a.
Pesticide paradox b.
Early testing c.
Defect clustering d.
Exhaustive testing: d.
Exhaustive testing
14. Which of the statements below is the best assessment of how the test principles apply
across the test life cycle?
a.
Test principles only affect test execution activities. b.
Test principles affect activities throughout the test life cycle c.
Test principles only affect the preparation for testing. d.
Test principles affect the early test activities such as review.: b. Test principles
affect activities throughout the test life cycle
15. Which of the following is most important to promote and maintain good relationships between
testers and developers?
a.
1. According to the ISTQB Glossary, regression testing is required for what purpose?
a.
To ensure that defects have not been introduced by a modification. b.
To motivate better unit testing by the programmers. c.
To verify the success of corrective actions. d.
To prevent a task from being incorrectly considered completed.: a. To ensure that
defects have not been introduced by a modification.
2. Ensuring that test design starts during the requirements definition phase is important to enable
which of the following test objectives?
a.
Finding defects through dynamic testing. b.
Finishing the project on time. c.
Gaining confidence in the system. d.
Preventing defects in the system.: d.
Preventing defects in the system.
3. What is beta testing? a.
Testing performed by product developers at the customer's location. b.
Testing performed by product developers at their own locations. c.
Testing performed by potential customers at the developers location. d.
Testing performed by potential customers at their own locations.: d. Testing performed
by potential customers at their own locations.
4. According to the ISTQB Glossary, a risk relates to which of the following? a.
Negative consequences that could occur. b.
Negative consequences for the test object. c.
Negative consequences that will occur.
, SWT301-FALL23 (QUIZ TOTAL) Questions and Answrs
d.
Negative feedback to the tester.: a. Negative
consequences that could occur.
5. What is the purpose of exit criteria? a.
To identify when a software system should be retired. b.
To define when a test level is complete. c.
To determine whether a test has passed. d.
To determine when a test has completed.: b. To define
when a test level is complete.
6. Match the following terms with corresponding definition: Error: a human
action that produces an incorrect result
7. Match the following terms with corresponding definition: Failure: deviation of the
software from its expected delivery or service
8. Match the following terms with corresponding definition: Fault: a
manifestation of an error in software
9. Match the following terms with corresponding definition:
Reliability: the probability that software will not cause the failure of the system for a specified
time under specified conditions
10. According to the ISTQB Glossary, the word 'bug' is synonymous with which of the
following words?
a. Mistake.
b.
Error.
c.
Incident. d.
Defect.: d.
Defect.
11. Which of the following is a MAJOR task of test planning? a.
Measuring and analyzing results. b.
, SWT301-FALL23 (QUIZ TOTAL) Questions and Answrs
Scheduling test analysis and design tasks. c.
, SWT301-FALL23 (QUIZ TOTAL) Questions and Answrs
Monitoring progress and test coverage. d.
Initiating corrective actions.: b. Scheduling test
analysis and design tasks.
12. Which of the following is a MAJOR task of test implementation and execu- tion?
a.
Assessing if more tests are needed. b.
Measuring and analyzing results. c.
Identifying test conditions or test requirements. d.
Reporting discrepancies as incidents.: d. Reporting
discrepancies as incidents.
13. Which is not a testing principle? a.
Pesticide paradox b.
Early testing c.
Defect clustering d.
Exhaustive testing: d.
Exhaustive testing
14. Which of the statements below is the best assessment of how the test principles apply
across the test life cycle?
a.
Test principles only affect test execution activities. b.
Test principles affect activities throughout the test life cycle c.
Test principles only affect the preparation for testing. d.
Test principles affect the early test activities such as review.: b. Test principles
affect activities throughout the test life cycle
15. Which of the following is most important to promote and maintain good relationships between
testers and developers?
a.
