BOILERMAKER 4 Exam Questions and Answers (Latest Update 2024) Correct Solutions

BOILERMAKER 4 Exam Questions and
Answers (Latest Update 2024) Correct
Solutions
The space between a thread of a bolt and its nut is called
_______. - Correct Answer ✅Clearance



The amount of difference allowed from a standard is called
_________. - Correct Answer ✅Tolerance



The normal method for measuring torque is _______. - Correct
Answer ✅Foot-pounds (ft. lbs.)



The method of measuring the amount of torque that is
applied to small bolts, nuts, and screws

is _______ - Correct Answer ✅Inch-pounds (in lbs.)



A(n) _______is a machined metal slot in a shaft and on parts
such as gears and pulleys that accept a key. - Correct
Answer ✅Keyway



An approximation of the diameter of a screw is known as the
screw's_______ - Correct Answer ✅Nominal size

, BOILERMAKER 4 Exam Questions and
Answers (Latest Update 2024) Correct
Solutions
The tolerance that the threads provide between a bolt and
nut determines the__________. - Correct Answer ✅Thread
classes



Fasteners with ____________ thread are used when rapid
assembly or disassembly of parts is required. - Correct
Answer ✅United National Coarse (UNC) thread



The__________ thread is used on thin-walled tubes, nuts,
ferrules, and couplings. - Correct Answer ✅United National
Extra Fine (UNEF) thread



The __________ thread is used in fasteners when a tighter fit is
desired. - Correct Answer ✅United National Fine (UNF)
thread



The___________ consists of standard symbols that are used to
identify thread - Correct Answer ✅Thread identification