Fall Protection || with 100% Errorless Answers.
fall hazard correct answers is any condition in the construction
workplace which exposes an employee to an
unprotected fall that may result in injury or death.
fractures, serious head injuries, death correct answers Falls from height can result in:
Scaffolds, Ladders, Roofs, Open sides & edges, Excavations, Bridges, Floor openings, Form
works correct answers Elevated locations which require
increased fall hazard awareness
Fall protection correct answers is required when one or more
employees have exposure to falls of six feet
or greater to the lower level.
Rule 1068 correct answers Overhead Walks, Runways and Platforms:
(1) Walks, runways, working platforms or open sided floors
2 m. (6.6 ft.) or more above the floor or ground level, except
platforms used for motor or similar equipment, which do not
afford standing space for persons, shall be guarded on all
open sides by standard railings and toeboards.
Eliminate the fall hazard, Prevent / prohibit exposure to fall, Control the fall correct answers
Hierarchy of Fall Hazard Control
Engineering Control correct answers Performing as much work on the ground
as possible to eliminate the hazard of
climbing/working at elevation.
Examples:
1. Assembling guardrail systems at
ground level rather than at elevation.
2. Maximize pre-assembly of structural
components on the ground.
Alternative Work Methods correct answers Example:
Use of radio communication for signaling
instead of employees hanging over the
edge giving signals
Preventing employee
exposure correct answers Fall prevention methods include:
▪ Use of a properly erected scaffoldings
▪ Protecting openings with covers or guardrails
▪ Providing leading edges with guardrails
▪ Use appropriate aerial lifts
fall hazard correct answers is any condition in the construction
workplace which exposes an employee to an
unprotected fall that may result in injury or death.
fractures, serious head injuries, death correct answers Falls from height can result in:
Scaffolds, Ladders, Roofs, Open sides & edges, Excavations, Bridges, Floor openings, Form
works correct answers Elevated locations which require
increased fall hazard awareness
Fall protection correct answers is required when one or more
employees have exposure to falls of six feet
or greater to the lower level.
Rule 1068 correct answers Overhead Walks, Runways and Platforms:
(1) Walks, runways, working platforms or open sided floors
2 m. (6.6 ft.) or more above the floor or ground level, except
platforms used for motor or similar equipment, which do not
afford standing space for persons, shall be guarded on all
open sides by standard railings and toeboards.
Eliminate the fall hazard, Prevent / prohibit exposure to fall, Control the fall correct answers
Hierarchy of Fall Hazard Control
Engineering Control correct answers Performing as much work on the ground
as possible to eliminate the hazard of
climbing/working at elevation.
Examples:
1. Assembling guardrail systems at
ground level rather than at elevation.
2. Maximize pre-assembly of structural
components on the ground.
Alternative Work Methods correct answers Example:
Use of radio communication for signaling
instead of employees hanging over the
edge giving signals
Preventing employee
exposure correct answers Fall prevention methods include:
▪ Use of a properly erected scaffoldings
▪ Protecting openings with covers or guardrails
▪ Providing leading edges with guardrails
▪ Use appropriate aerial lifts
