Flashcard sets, textbooks, questions
Network + N10-008 practice exam question
and answers
A cloud storage server has been brought online that is intended to serve
hospitals exclusively. Several hospitals, all owned by different entities,
have begun using this highly secured cloud server. What type of cloud
deployment model matches this type of server? - -Community
A community cloud is shared by a group of similar organizations that all
have similar needs. In this example, it is a server built only to serve
hospitals.
- A company has an access layer switch in the lobby of their
headquarters which of the following security technology should we
consider first given the placement of the switch - -Port security -
Considering physical access is provided to the switch we need to lock it
down to the best of our abilities. Portsecurity attempts to do justice by
limiting who and how many devices can plug into an individual switch port
though in general you need to be careful allowing anybody untrustworthy
to have physical access to your network equipment
- A company is implementing IPv6 addressing and wants to ensure there
are consistent addresses for printers and servers that will not change.
However, the company does not want to use static addresses.
Which of the following IPv6 schemes will provide the same address for the
devices? - -EUI-64
- A company requires an ethernet cable capable of providing 1Gpbs for
the lowest possible cost. Of the options below, what cable standard should
they select? - -Cat 5e
1 Gbps (older and cheaper than CAT 6)
- a firewall as configures with a role that forwards FTP traffic to an
internal server that is listening on a non-standard port. What best
describes the rule configured on this firewall? - -PAT
They are describing a process known as ' port forwarding' which is
considered a component of PAT
, - A large amount of expensive equipment is being moved into a
company warehouse this equipment needs to be tracked when it leaves or
enters the warehouse or when it is taken to be serviced which of the
following solutions would best allow us to record these changes - -Asset
tags—
Asset tags are great for tracking inventory of any type. We can scan the
tags and usually enter a note during the process to describe the actions
we took during this time
- A manager wants to deploy a syslog server on the network. What
benefit would a syslog server provide to the company? - -Aggregates
switch logs for easier review and correlation
- A nearby city offers wireless internet access throughout the public
areas. What type of network is this? - -MAN
- A network admin wants to narrow the scope of a subnet to two usable
IP addresses within a class C network. Which of the following is the correct
CIDR notation? - -192.1.0.124/30
- A network built in bridge mode contains 802.11g, 802.11n and 802.11
ac access points. What speeds would this wireless network perform at? - -
54 Mbs
- A network engineer has been assigned the replace a failed router. The
network already has a switch, cable modem and static IP assignments.
furthermore, there is a web server running on this network that should
remain available to the internet. What is the correct configuration and
placement for the devices above? - -The modem is places in bridge mode,
the router is places behind the modem and the web server is places
behind the router.
- A network engineer is adjusting the network settings on a server. They
issue the following command:
route add 0.0.0.0 mask 0.0.0.0 10.1.5.1 metric1
what setting has the engineer attempted to alter? - -They have set a
default gateway
- A network engineer is asked to create a solution that will serve the
data needs of the entire company. There are 3000+ users and the data
must remain onsite. What option listed below would meet these conditions
- -SAN
- A network engineer is reviewing a network statistics and notices a nigh
level of collisions between a switch and a PC. What is the most likely
source of this issue? - -The PC's NIC and/or the switchport are set to half-
duplex
, - a network tech is reviewing a network diagram and is looking for Layer
2 switch. What symbol should they be looking for? - -a rectangle with 2
horizontal arrows
- A network tech is reviewing the interface counters on a routers
interface the tech is attempting to confirm a cabling issue given the
information below which of the following metrics confirms that there is a
cabling issue?
CRC's :170
Giants :0
Runts :0
Multicast:12 - -CRC's
CRC's Measure the number of frame errors detected over an interface
which could be caused by corrupt data noise ( interference) on the cable
or just plain bad cabling
- A network technician needs to monitor the traffic going into a mission-
critical in the datacenter. Which of the following is the best method to
perform this? - -Use port mirroring
- A new cabling certification is being requested every time and network
technician rebuilds one end of a CAT 6 (vendor-certified) Cable to create a
crossover connection that is used to connect switches which of the
following will address this issue by allowing the use of the original cable -
-MDIX—
Auto MDIX allows a cable to take the correct connection requirements.
(Crossover vs straight through) and that's the opposite end of the cable
becomes less important to the tech
- a new device transmits data into a stich for the first time. Which of the
statements below is true? - -Data is flooded out of every port in that
VLAN, except the one it came in on
- A new network was set up in order to facilitate more users in a building
near your companies HQ. The new network is connected to the HQ's LAN
via a fiber optic cable. However many users on the new network are
unable to access the companies Intranet despise being able to access the
Internet. Which of the following corrections would most likely resolve this
issue? - -Correct the external firewall gateway address —
Could be a misconfigured firewall
- A new server has ben deployed in the cloud that does not support a
GUI. Which of the following could be used to star a secure remote console
session with this server? - -SSH- is encrypted
Network + N10-008 practice exam question
and answers
A cloud storage server has been brought online that is intended to serve
hospitals exclusively. Several hospitals, all owned by different entities,
have begun using this highly secured cloud server. What type of cloud
deployment model matches this type of server? - -Community
A community cloud is shared by a group of similar organizations that all
have similar needs. In this example, it is a server built only to serve
hospitals.
- A company has an access layer switch in the lobby of their
headquarters which of the following security technology should we
consider first given the placement of the switch - -Port security -
Considering physical access is provided to the switch we need to lock it
down to the best of our abilities. Portsecurity attempts to do justice by
limiting who and how many devices can plug into an individual switch port
though in general you need to be careful allowing anybody untrustworthy
to have physical access to your network equipment
- A company is implementing IPv6 addressing and wants to ensure there
are consistent addresses for printers and servers that will not change.
However, the company does not want to use static addresses.
Which of the following IPv6 schemes will provide the same address for the
devices? - -EUI-64
- A company requires an ethernet cable capable of providing 1Gpbs for
the lowest possible cost. Of the options below, what cable standard should
they select? - -Cat 5e
1 Gbps (older and cheaper than CAT 6)
- a firewall as configures with a role that forwards FTP traffic to an
internal server that is listening on a non-standard port. What best
describes the rule configured on this firewall? - -PAT
They are describing a process known as ' port forwarding' which is
considered a component of PAT
, - A large amount of expensive equipment is being moved into a
company warehouse this equipment needs to be tracked when it leaves or
enters the warehouse or when it is taken to be serviced which of the
following solutions would best allow us to record these changes - -Asset
tags—
Asset tags are great for tracking inventory of any type. We can scan the
tags and usually enter a note during the process to describe the actions
we took during this time
- A manager wants to deploy a syslog server on the network. What
benefit would a syslog server provide to the company? - -Aggregates
switch logs for easier review and correlation
- A nearby city offers wireless internet access throughout the public
areas. What type of network is this? - -MAN
- A network admin wants to narrow the scope of a subnet to two usable
IP addresses within a class C network. Which of the following is the correct
CIDR notation? - -192.1.0.124/30
- A network built in bridge mode contains 802.11g, 802.11n and 802.11
ac access points. What speeds would this wireless network perform at? - -
54 Mbs
- A network engineer has been assigned the replace a failed router. The
network already has a switch, cable modem and static IP assignments.
furthermore, there is a web server running on this network that should
remain available to the internet. What is the correct configuration and
placement for the devices above? - -The modem is places in bridge mode,
the router is places behind the modem and the web server is places
behind the router.
- A network engineer is adjusting the network settings on a server. They
issue the following command:
route add 0.0.0.0 mask 0.0.0.0 10.1.5.1 metric1
what setting has the engineer attempted to alter? - -They have set a
default gateway
- A network engineer is asked to create a solution that will serve the
data needs of the entire company. There are 3000+ users and the data
must remain onsite. What option listed below would meet these conditions
- -SAN
- A network engineer is reviewing a network statistics and notices a nigh
level of collisions between a switch and a PC. What is the most likely
source of this issue? - -The PC's NIC and/or the switchport are set to half-
duplex
, - a network tech is reviewing a network diagram and is looking for Layer
2 switch. What symbol should they be looking for? - -a rectangle with 2
horizontal arrows
- A network tech is reviewing the interface counters on a routers
interface the tech is attempting to confirm a cabling issue given the
information below which of the following metrics confirms that there is a
cabling issue?
CRC's :170
Giants :0
Runts :0
Multicast:12 - -CRC's
CRC's Measure the number of frame errors detected over an interface
which could be caused by corrupt data noise ( interference) on the cable
or just plain bad cabling
- A network technician needs to monitor the traffic going into a mission-
critical in the datacenter. Which of the following is the best method to
perform this? - -Use port mirroring
- A new cabling certification is being requested every time and network
technician rebuilds one end of a CAT 6 (vendor-certified) Cable to create a
crossover connection that is used to connect switches which of the
following will address this issue by allowing the use of the original cable -
-MDIX—
Auto MDIX allows a cable to take the correct connection requirements.
(Crossover vs straight through) and that's the opposite end of the cable
becomes less important to the tech
- a new device transmits data into a stich for the first time. Which of the
statements below is true? - -Data is flooded out of every port in that
VLAN, except the one it came in on
- A new network was set up in order to facilitate more users in a building
near your companies HQ. The new network is connected to the HQ's LAN
via a fiber optic cable. However many users on the new network are
unable to access the companies Intranet despise being able to access the
Internet. Which of the following corrections would most likely resolve this
issue? - -Correct the external firewall gateway address —
Could be a misconfigured firewall
- A new server has ben deployed in the cloud that does not support a
GUI. Which of the following could be used to star a secure remote console
session with this server? - -SSH- is encrypted
