Master 100 GRT
The main center line structural part of the hull is called the - answersKeel
The plates, put on in rows from bow to stern, are called - answersStrakes
The interior of the ship is divided by the________ into watertight compartments. -
answersBulkheads
The rod that transmits power from the engine to the propeller leading from the aft end of
the engine to the propeller is called the __________. - answersShaft
The waterline, draft, and freeboard will change with __________. - answersfuel used,
density of water, weight of cargo
If the vessel is out of balance laterally or athwartship (leaning to one side) it has a
__________. - answersList
The small drains on the deck are called __________. - answersScuppers
Stairs in a ship are called __________. - answersLadders
The handles on the watertight hatch or door are called __________. - answersDogs
The central or middle area of a ship is called __________. - answersamidships
Walls of a ship are called ________. - answersBulkheads
A halls or corridors in a ship is called: - answersPassageways
Plimsoll marks are placed amidships on both sides of the hull of a vessel to denote the
_____. - answersMaximum mean draft to which a vessel may be lawfully submerged.
, The rounded lower section of the anchor to which the shank is secured is called a
_____. - answersCrown
The tip of the Palm or Fluke is called _____. - answersbill or pea
The rigging that supports masts or king posts is called __________. - answersStanding
Rigging
The devices that are used to secure standing rigging, running rigging, and mooring lines
are called __________. - answersDeck Fittings
The _______ is a vertically mounted winch head used aboard ship when mechanical
power is required for raising the anchor, or lifting heavy weights. - answersCapstan
A device used to keep the side pressure of the sling legs away from the load being
hoisted is called __________. - answersSpreader
Long lengths of light line made fast to long items of cargo and heavy lifts for the purpose
of controlling the swing of the load as it is being hoisted or lowered is called
__________. - answersTag Lines
The following simple rules will help prolong the life of cargo-handling gear. Cargo
handlers should- - answersApply a light coat of oil to the wire rope slings periodically. A
lubricated sling will wear five times longer than a dry sling.
Clean cargo-handling gear regularly.
Ensure manila rope slings are dry before storing to prevent mildew.
Keep gear not in use in the gearbox or locker to prevent damage.
Know the safe working load of all gear (TM 5-725).
Not exceed the safe working load of any part of the rigging or of the cargo-handling gear
at any time.
Never overload a sling and never apply loads suddenly.
Heavy metal bed plates with two iron or steel posts are called __________. -
answersChocks
What metal fittings having two projecting horns used for securing lines? - answersCleats
Welded to a deck or bulkhead, ________have an eye to which lines or tackle are
fastened and are used for securing or handling cargo. - answersPad Eyes
Walls of a ship are called _____. - answersBulkheads
The main body of the ship below the main outside deck is the _____ - answershull
When a ship is properly balanced fore and aft, it is called _____? - answersIn trim
The main center line structural part of the hull is called the - answersKeel
The plates, put on in rows from bow to stern, are called - answersStrakes
The interior of the ship is divided by the________ into watertight compartments. -
answersBulkheads
The rod that transmits power from the engine to the propeller leading from the aft end of
the engine to the propeller is called the __________. - answersShaft
The waterline, draft, and freeboard will change with __________. - answersfuel used,
density of water, weight of cargo
If the vessel is out of balance laterally or athwartship (leaning to one side) it has a
__________. - answersList
The small drains on the deck are called __________. - answersScuppers
Stairs in a ship are called __________. - answersLadders
The handles on the watertight hatch or door are called __________. - answersDogs
The central or middle area of a ship is called __________. - answersamidships
Walls of a ship are called ________. - answersBulkheads
A halls or corridors in a ship is called: - answersPassageways
Plimsoll marks are placed amidships on both sides of the hull of a vessel to denote the
_____. - answersMaximum mean draft to which a vessel may be lawfully submerged.
, The rounded lower section of the anchor to which the shank is secured is called a
_____. - answersCrown
The tip of the Palm or Fluke is called _____. - answersbill or pea
The rigging that supports masts or king posts is called __________. - answersStanding
Rigging
The devices that are used to secure standing rigging, running rigging, and mooring lines
are called __________. - answersDeck Fittings
The _______ is a vertically mounted winch head used aboard ship when mechanical
power is required for raising the anchor, or lifting heavy weights. - answersCapstan
A device used to keep the side pressure of the sling legs away from the load being
hoisted is called __________. - answersSpreader
Long lengths of light line made fast to long items of cargo and heavy lifts for the purpose
of controlling the swing of the load as it is being hoisted or lowered is called
__________. - answersTag Lines
The following simple rules will help prolong the life of cargo-handling gear. Cargo
handlers should- - answersApply a light coat of oil to the wire rope slings periodically. A
lubricated sling will wear five times longer than a dry sling.
Clean cargo-handling gear regularly.
Ensure manila rope slings are dry before storing to prevent mildew.
Keep gear not in use in the gearbox or locker to prevent damage.
Know the safe working load of all gear (TM 5-725).
Not exceed the safe working load of any part of the rigging or of the cargo-handling gear
at any time.
Never overload a sling and never apply loads suddenly.
Heavy metal bed plates with two iron or steel posts are called __________. -
answersChocks
What metal fittings having two projecting horns used for securing lines? - answersCleats
Welded to a deck or bulkhead, ________have an eye to which lines or tackle are
fastened and are used for securing or handling cargo. - answersPad Eyes
Walls of a ship are called _____. - answersBulkheads
The main body of the ship below the main outside deck is the _____ - answershull
When a ship is properly balanced fore and aft, it is called _____? - answersIn trim
