( A+ GRADED 100% VERIFIED)
1. Wearing PPE on a sewage damaged project shall be done because it: Is
mandotary due to natural law or regulatory requirement
2. technicians Should clean and dry affected materials because it is: component
of the accepted standard of care, but not mandatory.
3. If something is recommended, that means it is: Advised or suggested but not a
component of the standard of care
4. May means: Signifies permission but not a component of the standard of care
5. The word CAN means: The ability or possibility but not a component of the
standard of care
6. We need to leave buildings that have been damaged by water both: Clean and
dry
7. The first concern of restorers on a project is: The health and safety of workers
and occupants
8. why is rapid response so important: Limits the potential for damages and can
reduce drying time
9. Attempting to identify safety issues should begin as soon as: The inspection
process
10. you find sagging ceilings that are heavy and saturated with water what should
you do?: Drain the water, remove the saturated drywall and dispose of it
11. When water is evaporating and leaving a surface the surface: Cools
12. Air movers primarily aid in drying by increasing: The rate of evaporation
13. PPE is required by regulations so it shall be used according to the s500: True
14. Thermal imaging cameras help find water that is evaporating because the
surface is: Cooler
15. Other than extraction what has the most effect on drying time: The rate of
evaporation
16. what air temperature range is ideal for LGR dehumidifiers?: 70-90F
17. This course is designed as a comprehensive safety course: False
18. For safety, drying equipment shall be equipped with a: Grounded plug
19. name 3 components of a respiratory protection program: Medical evaluation, fit
testing, and proper training
20. If you are cleaning up a sewer damaged project, at a minimum what PPE
should be worn?: Full face respiratory, water resistant suit and waterproof gloves and
boots
1/6
, 21. This course is designed to teach you how to identify and handle hazardous
material: False
22. Name two hazardous materials that are more likely to be found in older
building: Lead and asbestos
23 What organization has safety and health courses specifically tailored to the
restoration industry: IICRC
24. According to the Hierarchy of controls what is the least effective control
measure?: PPE
25. What is an IEP: Indoor Environmental Professional
26. What begins at 20% wood moister content or above?: Wood Root Fungi
27. What can begin at 16% wood moister content?: Non-destructive mold growth
28. Name 2 reasons why we should begin remediation as soon as possible.: -
Reduce potential for damage and reduce potential for microbial growth
29. What antimicrobial provides the lowest level of microorganism reduction:
Sanitizer
30. When you find mold on a water damage project, what are 3 things you should
do?: Put on appropriate PPE, initial barriers or containment and install ventilation
31. If you find mold growth, what equipment would you not install?: Air movers
32. what category of water is from a sanitary source and not likely to make you
sick?: Cat 1
33. What category of water contains significant contamination and can make you
sick?: Cat 2
34. When should a restorer consider bringing in an IEP on a Cat 2 or Cat 3
water intrusion?: Where there are high risk individuals or situations
35. Products that will reduce microorganism to a level that public agencies would
consider safe are called: Sanitizers
36. Where do you look for directions as to how a biocide shall be applied?: The
product label
37. Prior to application of an antimicrobial, obtain authorization the insurance
adjuster: False
38. Uses pins for finding the perimeter of water under carpet and padding: Moister
sensor
39. Uses a picture to assist in finding the perimeter of water in carpet and pad:
thermal imaging camera
40. Measures temperature and humidity of air: Thermo hygrometer
41. Determines how much moisture is in structural materials: Moister meter
2/6