ICC Vapor Recovery 1Exam Questions and
Answers Latest Update 2024
Phase I equipment is related to all of the following except: - Correct Answer
Dispenser mounted vapor recovery equipment
According to EO VR-201/202-N, the only authorized hose configuration is: - Correct
Answer Any hose Configuration
The most current ARB approved Phase II vapor recovery is: - Correct Answer EVR
When a certified Healy Technician is replacing the VP 1000 during operational
hours, they should do all of the following to elongate potentials problems except: -
Correct Answer Review service with gas station operator
The following component is not part of the Healy Phase II vapor recovery system: -
Correct Answer Healy Model 900 Vapor Motor
The max dispensing flow rate of a Healy 900 Series EVR nozzle is: - Correct
Answer 10 GPM
According to VR-201/202-N, a ________ should be installed on the Healy system if
the flow rate is above 10 GPM - Correct Answer Flow limiter
The Quarterly Inspection and Testing of a Healy Phase II EVR system should
include the following except: - Correct Answer Conduct a pressure decay test by a
Healy Certified Technician
The first sign of oxygen depletion is: - Correct Answer Accelerated breathing and
heartbeat
According to PEI 500, each of the following are proper methods of removing a
portion of a GDF from service except: - Correct Answer Noting event in the
defective equipment log
What procedure checks the integrity of the vapor check valve in the nozzle? -
Correct Answer Nozzle bag test
Which of the following conditions is a Healy certified technician not required to
repair? - Correct Answer Reconnection of a breakaway after a drive off
What procedure is required after a nozzle spout change? - Correct Answer Nozzle
automatic shutoff test
, A vapor recovery system generally uses what unit of measurement? - Correct
Answer Inches of water column
During the annual inspection and testing of the vapor recovery system; the first three
steps are to:
Conduct static pressure performance of the Healy Clean Air Separator
Conduct pressure decay test
Conduct dispenser vapor line tightness test
What is the 4th step? - Correct Answer Conduct V/L test on all nozzles
What is the lower limit of acceptable V/L for a nozzle? - Correct Answer .95
In order for a technician to be authorized to clear an ISD Alarm, he or she must be
certified by which of the following? - Correct Answer Manufacture
The clean Air Separator belongs to which system? - Correct Answer Healy phase II
All of the following items should be on hand to react to a spill except: - Correct
Answer Class A fire extinguisher
Which is not a component of a Healy phase-II vapor recovery system? - Correct
Answer Universal 37
Which of the following is not a part of hanging hardware? - Correct Answer Husky
Model 4885
What is mounted on the top of the manifold vent mast? - Correct Answer
Pressure/vacuum vent cap
Connecting a copper wire from the tank to the earth constitutes what? - Correct
Answer Grounding
What is the maximum allowable fuel flow from the dispenser? - Correct Answer 10
GPM
What is the maximum length of the hose/breakaway/swivel when measured to the
base of the nozzle? - Correct Answer 20 feet
Compounds with a high vapor pressure, such as gasoline, will evaporate readily and
will typically: - Correct Answer Have a low flash point
A liquid removal device should be installed on a balance system at: - Correct
Answer The low point of the hose between the vehicle and dispenser with the
nozzle in the vehicle
Answers Latest Update 2024
Phase I equipment is related to all of the following except: - Correct Answer
Dispenser mounted vapor recovery equipment
According to EO VR-201/202-N, the only authorized hose configuration is: - Correct
Answer Any hose Configuration
The most current ARB approved Phase II vapor recovery is: - Correct Answer EVR
When a certified Healy Technician is replacing the VP 1000 during operational
hours, they should do all of the following to elongate potentials problems except: -
Correct Answer Review service with gas station operator
The following component is not part of the Healy Phase II vapor recovery system: -
Correct Answer Healy Model 900 Vapor Motor
The max dispensing flow rate of a Healy 900 Series EVR nozzle is: - Correct
Answer 10 GPM
According to VR-201/202-N, a ________ should be installed on the Healy system if
the flow rate is above 10 GPM - Correct Answer Flow limiter
The Quarterly Inspection and Testing of a Healy Phase II EVR system should
include the following except: - Correct Answer Conduct a pressure decay test by a
Healy Certified Technician
The first sign of oxygen depletion is: - Correct Answer Accelerated breathing and
heartbeat
According to PEI 500, each of the following are proper methods of removing a
portion of a GDF from service except: - Correct Answer Noting event in the
defective equipment log
What procedure checks the integrity of the vapor check valve in the nozzle? -
Correct Answer Nozzle bag test
Which of the following conditions is a Healy certified technician not required to
repair? - Correct Answer Reconnection of a breakaway after a drive off
What procedure is required after a nozzle spout change? - Correct Answer Nozzle
automatic shutoff test
, A vapor recovery system generally uses what unit of measurement? - Correct
Answer Inches of water column
During the annual inspection and testing of the vapor recovery system; the first three
steps are to:
Conduct static pressure performance of the Healy Clean Air Separator
Conduct pressure decay test
Conduct dispenser vapor line tightness test
What is the 4th step? - Correct Answer Conduct V/L test on all nozzles
What is the lower limit of acceptable V/L for a nozzle? - Correct Answer .95
In order for a technician to be authorized to clear an ISD Alarm, he or she must be
certified by which of the following? - Correct Answer Manufacture
The clean Air Separator belongs to which system? - Correct Answer Healy phase II
All of the following items should be on hand to react to a spill except: - Correct
Answer Class A fire extinguisher
Which is not a component of a Healy phase-II vapor recovery system? - Correct
Answer Universal 37
Which of the following is not a part of hanging hardware? - Correct Answer Husky
Model 4885
What is mounted on the top of the manifold vent mast? - Correct Answer
Pressure/vacuum vent cap
Connecting a copper wire from the tank to the earth constitutes what? - Correct
Answer Grounding
What is the maximum allowable fuel flow from the dispenser? - Correct Answer 10
GPM
What is the maximum length of the hose/breakaway/swivel when measured to the
base of the nozzle? - Correct Answer 20 feet
Compounds with a high vapor pressure, such as gasoline, will evaporate readily and
will typically: - Correct Answer Have a low flash point
A liquid removal device should be installed on a balance system at: - Correct
Answer The low point of the hose between the vehicle and dispenser with the
nozzle in the vehicle
