EPA TYPE 2 Examination with Complete Questions
and Answers
After the installation of any type of system, or a major repair to a system, the unit
must be leak checked. The recommended procedure is to - Correct Answer
.pressurize the system with an inert gas (nitrogen) and leak check
Traces of oil around the sight glass inlet fitting of a refrigeration system might be an
indication of - Correct Answer A leak
A condition of excessive superheat at the evaporator outlet and the compressor inlet
of a A/C system could be an indication of - Correct Answer .
Low on refrigerant charge
Type II classification, as identified by the EPA, applies to what equipment? - Correct
Answer Split air conditioning systems with five (5) lbs. or more refrigerant charge
Front seating the three way suction service valve will close the _ - Correct Answer
Suction inlet to the valve
The required evacuation level for high pressure appliances using recovery
equipment manufactured before November 15, 1993 with a charge of less than 200
lbs. is - Correct Answer 0 inches Hg
The required evacuation level for recovery equipment manufactured after November
15, 1993 with an R-407C charge of less than 200 lbs. is - Correct Answer 0 inches
Hg
The required evacuation level for recovery equipment manufactured after November
15, 1993 with an R-12 charge of less than 200 lbs. is - Correct Answer 10 inches
Hg
industrial process refrigeration equipment (IPR) with an annual leak rate of ______
% requires repair under EPA regulations. - Correct Answer 30%
Comfort cooling chillers and all other equipment with an annual leak rate of ______
% requires repair under EPA regulations. - Correct Answer 10%
Recover time can be shortened by - Correct Answer a.All of the above
b.Recovering as much liquid as possibe in the initial stagec.
c.Cooling the recovery tank in ice waterd.
d.Using short hoses
and Answers
After the installation of any type of system, or a major repair to a system, the unit
must be leak checked. The recommended procedure is to - Correct Answer
.pressurize the system with an inert gas (nitrogen) and leak check
Traces of oil around the sight glass inlet fitting of a refrigeration system might be an
indication of - Correct Answer A leak
A condition of excessive superheat at the evaporator outlet and the compressor inlet
of a A/C system could be an indication of - Correct Answer .
Low on refrigerant charge
Type II classification, as identified by the EPA, applies to what equipment? - Correct
Answer Split air conditioning systems with five (5) lbs. or more refrigerant charge
Front seating the three way suction service valve will close the _ - Correct Answer
Suction inlet to the valve
The required evacuation level for high pressure appliances using recovery
equipment manufactured before November 15, 1993 with a charge of less than 200
lbs. is - Correct Answer 0 inches Hg
The required evacuation level for recovery equipment manufactured after November
15, 1993 with an R-407C charge of less than 200 lbs. is - Correct Answer 0 inches
Hg
The required evacuation level for recovery equipment manufactured after November
15, 1993 with an R-12 charge of less than 200 lbs. is - Correct Answer 10 inches
Hg
industrial process refrigeration equipment (IPR) with an annual leak rate of ______
% requires repair under EPA regulations. - Correct Answer 30%
Comfort cooling chillers and all other equipment with an annual leak rate of ______
% requires repair under EPA regulations. - Correct Answer 10%
Recover time can be shortened by - Correct Answer a.All of the above
b.Recovering as much liquid as possibe in the initial stagec.
c.Cooling the recovery tank in ice waterd.
d.Using short hoses
