TEXAS MOLD ASSESSMENT CONSULTANT EXAM
NEWEST ACTUAL EXAM COMPLETE 170 QUESTIONS
AND CORRECT DETAILED ANSWERS (VERIFIED
ANSWERS) |ALREADY GRADED A+
the Texas mold assessment and remediation rules states that notice signs must be
legible from - ANSWER: 10 feet
after completing any training course required by the Texas mold assessment and
remediation rules, how long do you have to take and pass the state examination -
ANSWER: 6 months
the assigned protection factor (PF) for an N-95 respirator is - ANSWER: there is no PF
rating for an N-95 respirator
According to the EPA"mold remediation in schools and commercial buildings"
document, the EPA recommends the following for cleanup of books and papers that
were damaged with clear water within 24-48 hours - ANSWER: discard all books and
papers, photocopy and discard originals, and freeze or freeze-dry originals
when sampling with a spore trap you are usually trying to determine - ANSWER:
identification of viable mild spores
which of the following sampling devices would you use to determine respirable and
non-respirable viable airborne mold spores? - ANSWER: air-o-cell cassette
according to the Texas mold assessment and remediation rules, if a contractor is
working under the exceptions and exemptions subsection and identifies additional
mold that affects a total surface area of more than 25 contiguous square feet they
shall - ANSWER: Immediately cease all remediation work and implement emergency
containment if necessary
according to the Texas mold assessment and remediation rules, a containment area
is defined as - ANSWER: an area that has been enclosed to control the release of
mold or mold-containing vapors into the surrounding area
a musty odor indoors usually indicates - ANSWER: microbial growth
skin and eye protection during the remediation process is used to protect workers
from - ANSWER: mold toxins and spores, dust mites, and cleaning products
according to the Texas mold assessment and remediation rules the required
clearance level of mold spores is - ANSWER: N/A
, which sampling method would you use to determine both viable and non- viable
mold concentrations in the air - ANSWER: air-o-cell-cassette
according to the EPA's "mold remediation in schools and commercial buildings"
document, the EPA recommends the following for cleanup for non-porous hard
surface areas - ANSWER: cleaned with detergent solution
what is the normal air flow rate an air-o-cell cassette - ANSWER: 15 liters/minute
according to the. EPA's "mold remediation in schools and commercial buildings", it is
recommended that water damaged cellulose ceiling tiles should. be - ANSWER:
discarded
what is the normal air flow rater used for an Andersen sampler - ANSWER: 28.3
liters/minute
according to the Texas mold assessment and remediation rules, who can write a
mold management plan? - ANSWER: a licensed mold assessment consultant
according to the Texas mold assessment and remediation rules, a mold assessment
consultant may perform an assessment to - ANSWER: collect data for writing a mold
assessment report
health effects from inhalation of mold spores could be - ANSWER: Hypersensitivity
pneumonitis
according to the Texas mold assessment and remediation rules, mold is defines as -
ANSWER: spores, hyphae, mycotoxins, and living or dead fungi
according to the Texas mold assessment and remediation rules, the purpose of a
mold assessment is to - ANSWER: determine the sources, locations and extent of
mold growth in a building / determine the condition(s) that caused the mold
growth / and enable the assessment consultant to prepare a mold remediation
protocol
according to the Texas mold assessment and remediation rules, a licensed mold
assessment company or consultant shall maintain records until - ANSWER: the
company or consultant issues a mold assessment report, management plan, or
remediation protocol to a client, if the company or consultant performs. only the
initial assessment for the project / the company or consultant issues the final. status
report to the client, if a. final status report is issued / and the company or consultant
provides the. signed. certificate of mold remediation to a mold remediation
contractor or company, if a certificate of mold remediation is provided
according to the Texas mold assessment and remediation rules, a post remediation
assessment shall determine if - ANSWER: the work area is free of all visible mold and
NEWEST ACTUAL EXAM COMPLETE 170 QUESTIONS
AND CORRECT DETAILED ANSWERS (VERIFIED
ANSWERS) |ALREADY GRADED A+
the Texas mold assessment and remediation rules states that notice signs must be
legible from - ANSWER: 10 feet
after completing any training course required by the Texas mold assessment and
remediation rules, how long do you have to take and pass the state examination -
ANSWER: 6 months
the assigned protection factor (PF) for an N-95 respirator is - ANSWER: there is no PF
rating for an N-95 respirator
According to the EPA"mold remediation in schools and commercial buildings"
document, the EPA recommends the following for cleanup of books and papers that
were damaged with clear water within 24-48 hours - ANSWER: discard all books and
papers, photocopy and discard originals, and freeze or freeze-dry originals
when sampling with a spore trap you are usually trying to determine - ANSWER:
identification of viable mild spores
which of the following sampling devices would you use to determine respirable and
non-respirable viable airborne mold spores? - ANSWER: air-o-cell cassette
according to the Texas mold assessment and remediation rules, if a contractor is
working under the exceptions and exemptions subsection and identifies additional
mold that affects a total surface area of more than 25 contiguous square feet they
shall - ANSWER: Immediately cease all remediation work and implement emergency
containment if necessary
according to the Texas mold assessment and remediation rules, a containment area
is defined as - ANSWER: an area that has been enclosed to control the release of
mold or mold-containing vapors into the surrounding area
a musty odor indoors usually indicates - ANSWER: microbial growth
skin and eye protection during the remediation process is used to protect workers
from - ANSWER: mold toxins and spores, dust mites, and cleaning products
according to the Texas mold assessment and remediation rules the required
clearance level of mold spores is - ANSWER: N/A
, which sampling method would you use to determine both viable and non- viable
mold concentrations in the air - ANSWER: air-o-cell-cassette
according to the EPA's "mold remediation in schools and commercial buildings"
document, the EPA recommends the following for cleanup for non-porous hard
surface areas - ANSWER: cleaned with detergent solution
what is the normal air flow rate an air-o-cell cassette - ANSWER: 15 liters/minute
according to the. EPA's "mold remediation in schools and commercial buildings", it is
recommended that water damaged cellulose ceiling tiles should. be - ANSWER:
discarded
what is the normal air flow rater used for an Andersen sampler - ANSWER: 28.3
liters/minute
according to the Texas mold assessment and remediation rules, who can write a
mold management plan? - ANSWER: a licensed mold assessment consultant
according to the Texas mold assessment and remediation rules, a mold assessment
consultant may perform an assessment to - ANSWER: collect data for writing a mold
assessment report
health effects from inhalation of mold spores could be - ANSWER: Hypersensitivity
pneumonitis
according to the Texas mold assessment and remediation rules, mold is defines as -
ANSWER: spores, hyphae, mycotoxins, and living or dead fungi
according to the Texas mold assessment and remediation rules, the purpose of a
mold assessment is to - ANSWER: determine the sources, locations and extent of
mold growth in a building / determine the condition(s) that caused the mold
growth / and enable the assessment consultant to prepare a mold remediation
protocol
according to the Texas mold assessment and remediation rules, a licensed mold
assessment company or consultant shall maintain records until - ANSWER: the
company or consultant issues a mold assessment report, management plan, or
remediation protocol to a client, if the company or consultant performs. only the
initial assessment for the project / the company or consultant issues the final. status
report to the client, if a. final status report is issued / and the company or consultant
provides the. signed. certificate of mold remediation to a mold remediation
contractor or company, if a certificate of mold remediation is provided
according to the Texas mold assessment and remediation rules, a post remediation
assessment shall determine if - ANSWER: the work area is free of all visible mold and
