WMGT 322
(From the Initial Stages of Project Development) Which of the following could
be considered stakeholders for a Civil Engineer project? Select ALL that
apply. - correct answer ✔Contracting Officer
Facility User
Communications Squadron Representative
Airfield Manager
(From the Initial Stages of Project Development) Which of the following
documents could be considered part of the project record? Select ALL that
apply. - correct answer ✔Independent Government Estimate
Quality Control Plan
Contractor Submittals
(From the Initial Stages of Project Development) A SABER contractor submits
a project invoice to the government that includes rental of a 25K Forklift. The
construction inspector for this project clearly recalls that the only forklift used
on the jobsite was a smaller 5K forklift, which costs significantly less money to
rent. Which document in the project record could be used to dispute this
claim? - correct answer ✔AF Form 1477 Daily Construction Inspection
Report
(From the Programming Fundamentals Lesson) You are working on a project
and determine a change order is needed because the beams were too small
to handle the roof load. However, this would exceed the approval authority for
this Construction project. What is a viable option for the project team? -
correct answer ✔Resubmit the project to obtain appropriate approval even if
work must stop while the approval is obtained.
, (From the Programming Fundamentals Lesson) If a project modifies an
existing facility to make it compliant with current codes and regulations, it is
likely a(n) _______ project. - correct answer ✔Repair
(From the Programming Fundamentals Lesson) Match the class of cost
estimate with its definition and use (not all options will have a match). - correct
answer ✔Class 1: Unit Price
Used to negotiate and compare bids with Contractors.
Class 3: Parametric Used for budgeting and making the official Programmed
Amount.
Class 5: Square Foot Used for long range planning when the scope is still
poorly defined.
(From the Programming Fundamentals Lesson) Determining the Work
Classification is one of the most important steps in the programming process,
before determining the Fund Source and Program Avenue. Work
Classification can be defined as: - correct answer ✔Describing the nature of
the work to be accomplished
(From the Project Management Plan Lesson) Who is responsible for creating
a Project Management Plan? - correct answer ✔Project Manager
(From the Project Management Plan Lesson) At what phase in the Air Force
project lifecycle should a Project Management Plan be developed? - correct
answer ✔Planning and Programming
(From the Project Management Plan Lesson) MSgt Jones is an extremely
competent SNCO that has years of experience working on high voltage power
projects. You have recently been appointed project manager for a new power
(From the Initial Stages of Project Development) Which of the following could
be considered stakeholders for a Civil Engineer project? Select ALL that
apply. - correct answer ✔Contracting Officer
Facility User
Communications Squadron Representative
Airfield Manager
(From the Initial Stages of Project Development) Which of the following
documents could be considered part of the project record? Select ALL that
apply. - correct answer ✔Independent Government Estimate
Quality Control Plan
Contractor Submittals
(From the Initial Stages of Project Development) A SABER contractor submits
a project invoice to the government that includes rental of a 25K Forklift. The
construction inspector for this project clearly recalls that the only forklift used
on the jobsite was a smaller 5K forklift, which costs significantly less money to
rent. Which document in the project record could be used to dispute this
claim? - correct answer ✔AF Form 1477 Daily Construction Inspection
Report
(From the Programming Fundamentals Lesson) You are working on a project
and determine a change order is needed because the beams were too small
to handle the roof load. However, this would exceed the approval authority for
this Construction project. What is a viable option for the project team? -
correct answer ✔Resubmit the project to obtain appropriate approval even if
work must stop while the approval is obtained.
, (From the Programming Fundamentals Lesson) If a project modifies an
existing facility to make it compliant with current codes and regulations, it is
likely a(n) _______ project. - correct answer ✔Repair
(From the Programming Fundamentals Lesson) Match the class of cost
estimate with its definition and use (not all options will have a match). - correct
answer ✔Class 1: Unit Price
Used to negotiate and compare bids with Contractors.
Class 3: Parametric Used for budgeting and making the official Programmed
Amount.
Class 5: Square Foot Used for long range planning when the scope is still
poorly defined.
(From the Programming Fundamentals Lesson) Determining the Work
Classification is one of the most important steps in the programming process,
before determining the Fund Source and Program Avenue. Work
Classification can be defined as: - correct answer ✔Describing the nature of
the work to be accomplished
(From the Project Management Plan Lesson) Who is responsible for creating
a Project Management Plan? - correct answer ✔Project Manager
(From the Project Management Plan Lesson) At what phase in the Air Force
project lifecycle should a Project Management Plan be developed? - correct
answer ✔Planning and Programming
(From the Project Management Plan Lesson) MSgt Jones is an extremely
competent SNCO that has years of experience working on high voltage power
projects. You have recently been appointed project manager for a new power
