Massive Review #2 (N10-00x) Questions and Answers
1. Which of the following routing protocols makes use of areas to allow for creating a
hierarchal design?: OSPF
2. Which of the following is NOT true of a full duplex connection?: Full duplex means the device
is capable of sending and receiving but not at the same time
3. At which layer of the OSI model do bridges and switches operate?: data link
4. What is a reference model?: a system or thing used as an example to follow or imitate.
5. The top layer of the OSI model that interfaces with the processes is the
layer.: application
6. What is the name of the fiber-optic connector that has a small size and has replaced the SC
and ST connectors?: MT-RJ
7. Which of the following is a characteristic of a client-server network?: Au- thentication
conducted by a central entity?
8. What is Multi-Protocol Label Switching (MPLS)?: a way to label data to route it more
efficiently?
9. Why would one use a peer-to-peer network?: One doesn't want to run a server
10.Which type of network is characterized by the lack of a dedicated server?-
: peer to peer
11.Which of the following statements is a characteristic of a physical bus topology?: ever
node is connected to a central backbone
, Massive Review #2 (N10-00x) Questions and Answers
12.You want to run 1000BaseT cable as part of your Ethernet network. What is the
transmission speed of 1000BaseT?: 1Gpbs
13.Which of the following is a connector type used with coaxial cabling?: BNC
14.Question 14 (1 point)
Saved
what physical topology is this?: MESH
15.What kind of cable is used for the 100BaseTX standard?: unshielded twisted pair (UTP)
shielded twisted pair (STP)
16.Which of the following is NOT a function of a Voltage Event Recorder?: -
capturing packets
17.In the Network+ troubleshooting model, what should you do right before you select the most
probable cause of a problem?: establish what has changed
18.You want to check whether the TCP/IP configuration on your Windows 10 Professional
workstation is correct. Which of the following commands will display the results you need?:
PING
, Massive Review #2 (N10-00x) Questions and Answers
19.What tool is used to connect a UTP cable to a patch panel?: PUNCHDOWN TOOL
20.Which of the following components would NOT normally be included in a network
baseline?: I/O
21.What is the best reason to have NAC?: control access to their network?
22.Which tool can be used to test the response times of common network applications?:
certifier
23.The Cisco ASA device and the Snort freeware program are examples of
?: IPS/IDS devices
24.Which command should you run on a Linux workstation if you want to display the
configuration parameters for the em1 interface?: SHOW RUNNING CONFIG
25.From a Linux workstation, which command should you run if you want to query a DNS
server?: dig
26.What is the name of the most common method used for writing messages from different
systems on a common server?: SYSLOG
27.Alexandra moved her workstation into her new office. She noticed the link light on her
network card was not lit when she turned the computer on. The cable was connected to the NIC
and to the wall jack. She used the same patch cable she used in her old office. What is the most
likely reason the link light would be out?: the wall jack is not connected to the network
28.What is one of the things that a SIEM is not useful for collecting?: data desimination?
1. Which of the following routing protocols makes use of areas to allow for creating a
hierarchal design?: OSPF
2. Which of the following is NOT true of a full duplex connection?: Full duplex means the device
is capable of sending and receiving but not at the same time
3. At which layer of the OSI model do bridges and switches operate?: data link
4. What is a reference model?: a system or thing used as an example to follow or imitate.
5. The top layer of the OSI model that interfaces with the processes is the
layer.: application
6. What is the name of the fiber-optic connector that has a small size and has replaced the SC
and ST connectors?: MT-RJ
7. Which of the following is a characteristic of a client-server network?: Au- thentication
conducted by a central entity?
8. What is Multi-Protocol Label Switching (MPLS)?: a way to label data to route it more
efficiently?
9. Why would one use a peer-to-peer network?: One doesn't want to run a server
10.Which type of network is characterized by the lack of a dedicated server?-
: peer to peer
11.Which of the following statements is a characteristic of a physical bus topology?: ever
node is connected to a central backbone
, Massive Review #2 (N10-00x) Questions and Answers
12.You want to run 1000BaseT cable as part of your Ethernet network. What is the
transmission speed of 1000BaseT?: 1Gpbs
13.Which of the following is a connector type used with coaxial cabling?: BNC
14.Question 14 (1 point)
Saved
what physical topology is this?: MESH
15.What kind of cable is used for the 100BaseTX standard?: unshielded twisted pair (UTP)
shielded twisted pair (STP)
16.Which of the following is NOT a function of a Voltage Event Recorder?: -
capturing packets
17.In the Network+ troubleshooting model, what should you do right before you select the most
probable cause of a problem?: establish what has changed
18.You want to check whether the TCP/IP configuration on your Windows 10 Professional
workstation is correct. Which of the following commands will display the results you need?:
PING
, Massive Review #2 (N10-00x) Questions and Answers
19.What tool is used to connect a UTP cable to a patch panel?: PUNCHDOWN TOOL
20.Which of the following components would NOT normally be included in a network
baseline?: I/O
21.What is the best reason to have NAC?: control access to their network?
22.Which tool can be used to test the response times of common network applications?:
certifier
23.The Cisco ASA device and the Snort freeware program are examples of
?: IPS/IDS devices
24.Which command should you run on a Linux workstation if you want to display the
configuration parameters for the em1 interface?: SHOW RUNNING CONFIG
25.From a Linux workstation, which command should you run if you want to query a DNS
server?: dig
26.What is the name of the most common method used for writing messages from different
systems on a common server?: SYSLOG
27.Alexandra moved her workstation into her new office. She noticed the link light on her
network card was not lit when she turned the computer on. The cable was connected to the NIC
and to the wall jack. She used the same patch cable she used in her old office. What is the most
likely reason the link light would be out?: the wall jack is not connected to the network
28.What is one of the things that a SIEM is not useful for collecting?: data desimination?
