DC 308 TEAM LEAD
2025 with complete
verified solutions
On scene leader - answer Who does the team leader report to?
Directs the nozzleman in employment of hose, directs hosemen, directs
the hose to be charged/secured, directs the rotation of the attack team on
the hose, communicates with on scene and responsible for the health and
wellbeing of the attack team. - answer What is the team lead responsible
for?
Team lead or number one nozzleman. - answer Who are the only people
that can give the order, "relieve the nozzleman?"
One - answer How many team leaders are needed for 2 attack teams
fighting the same fire?
Two - answer How many team leaders are needed for 2 attack teams
fighting 2 separate independent fires?
If access to the fire space is available - answer When should a direct
attack be used?
You can attempt to vent the space or use an indirect attack - answer
What actions can be taken if conditions of the fire prevents space access?
When firefighters advance into the immediate fire area and apply water
onto the fire. - answer What is a direct attack?
, The air is cooler and there is a greater visibility near the deck. - answer
Why is it important for the team to remain low at all times when attacking
from a door way or entering a space?
When entry can be made into the fire space, but direct access to the seat
of the fire is not possible. - answer When should you use fog attack?
-Where overhead gases are burning or hot gas layers have formed in the
overhead.
-Where the seat of the fire is obstructed and the water streams cannot be
applied directly onto the seat.
-Where multiple seats of the fire are growing within the compartment. -
answer What are 3 specific examples when a fog attack should be used?
Yes. If high temperature denies access to the space, but the burning
material can be reached by a hose stream, water can be applied to the
seat of the fire from the access. - answer Can you use a direct attack
from the entry to the space?
The conditions in the fire space prevent firefighters from advancing into
the immediate fire area. - answer When would an indirect attack be
used?
In the repair party manual in the main space fire doctrine. - answer
Where can information on machinery space fires be found?
2 minutes - answer How long can AFFF bilge sprinkling be activated in a
machinery space/pump room before entry?
A reflash watch must be set by the number 1 nozzleman - answer What
happens after a fire is out?
Begin at the perimeter and work to the point of origin. - answer Where
do you start overhaul?
2025 with complete
verified solutions
On scene leader - answer Who does the team leader report to?
Directs the nozzleman in employment of hose, directs hosemen, directs
the hose to be charged/secured, directs the rotation of the attack team on
the hose, communicates with on scene and responsible for the health and
wellbeing of the attack team. - answer What is the team lead responsible
for?
Team lead or number one nozzleman. - answer Who are the only people
that can give the order, "relieve the nozzleman?"
One - answer How many team leaders are needed for 2 attack teams
fighting the same fire?
Two - answer How many team leaders are needed for 2 attack teams
fighting 2 separate independent fires?
If access to the fire space is available - answer When should a direct
attack be used?
You can attempt to vent the space or use an indirect attack - answer
What actions can be taken if conditions of the fire prevents space access?
When firefighters advance into the immediate fire area and apply water
onto the fire. - answer What is a direct attack?
, The air is cooler and there is a greater visibility near the deck. - answer
Why is it important for the team to remain low at all times when attacking
from a door way or entering a space?
When entry can be made into the fire space, but direct access to the seat
of the fire is not possible. - answer When should you use fog attack?
-Where overhead gases are burning or hot gas layers have formed in the
overhead.
-Where the seat of the fire is obstructed and the water streams cannot be
applied directly onto the seat.
-Where multiple seats of the fire are growing within the compartment. -
answer What are 3 specific examples when a fog attack should be used?
Yes. If high temperature denies access to the space, but the burning
material can be reached by a hose stream, water can be applied to the
seat of the fire from the access. - answer Can you use a direct attack
from the entry to the space?
The conditions in the fire space prevent firefighters from advancing into
the immediate fire area. - answer When would an indirect attack be
used?
In the repair party manual in the main space fire doctrine. - answer
Where can information on machinery space fires be found?
2 minutes - answer How long can AFFF bilge sprinkling be activated in a
machinery space/pump room before entry?
A reflash watch must be set by the number 1 nozzleman - answer What
happens after a fire is out?
Begin at the perimeter and work to the point of origin. - answer Where
do you start overhaul?
