Solution Manual
for
Applied Statics and
Strength of Materials
Seventh Edition
George F. Limbrunner (Inactive)
Craig T. D’Allaird
iv
Copyright © 2020 Pearson Education, Inc.
,______________________________________________________________________________
Copyright © 2022 by Pearson Education, Inc. or its affiliates, 221 River Street, Hoboken,
NJ 07030. All Rights Reserved. Manufactured in the United States of America. This publication
is protected by copyright, and permission should be obtained from the publisher prior to any
prohibited reproduction, storage in a retrieval system, or transmission in any form or by any
means, electronic, mechanical, photocopying, recording, or otherwise. For information regarding
permissions, request forms, and the appropriate contacts within the Pearson Education Global
Rights and Permissions department, please visit www.pearsoned.com/permissions/.
ISBN-13: 978-0-13-571672-4
ISBN-10: 0-13-571672-1
, Contents
Chapter 1 1
Chapter 2 12
Chapter 3 20
Chapter 4 49
Chapter 5 71
Chapter 6 115
Chapter 7 158
Chapter 8 177
Chapter 9 202
Chapter 10 221
Chapter 11 232
Chapter 12 267
Chapter 13 285
Chapter 14 330
Chapter 15 361
Chapter 16 398
Chapter 17 428
Chapter 18 474
Chapter 19 502
Chapter 20 513
iii
Copyright © 2021 Pearson Education, Inc.
, Solution Manual
FOR
APPLIED STATICS AND STRENGTH OF MATERIALS
Seventh Edition
George F. Limbrunner, P.E., (INACTIVE)
Craig T. D’Allaird, P.E.
NOTES:
1. The solutions presented herein are, in general, somewhat abbreviated to conserve space.
Very little explanation is furnished. Sketches are kept to a minimum. Few checks are shown.
2. The solutions follow the procedures developed in the examples in the text.
3. The solutions are based on the limited tables furnished in the text and/or the appendices.
The tables furnished are for the purposes of this text only and should not be used for design.
4. The solutions for the design problems are generally not the only solution nor are they
necessarily the most economical solutions.
5. Please note that problem numbers in the solution manual are depicted with both dashes (‐)
and periods (.) between the chapter and problem numbers. These are interchangeable.
6. It should be noted that the previous editions of the text used lowercase s to denote stresses.
This has changed in the 7th edition, but due to time constraints this solution manual has not
been completely updated to reflect such.
7. If you find errors in this manual or in the text, please forward them to me at
.
Craig T. D’Allaird
Troy, NY
January 2021
iv
Copyright © 2021 Pearson Education, Inc.
for
Applied Statics and
Strength of Materials
Seventh Edition
George F. Limbrunner (Inactive)
Craig T. D’Allaird
iv
Copyright © 2020 Pearson Education, Inc.
,______________________________________________________________________________
Copyright © 2022 by Pearson Education, Inc. or its affiliates, 221 River Street, Hoboken,
NJ 07030. All Rights Reserved. Manufactured in the United States of America. This publication
is protected by copyright, and permission should be obtained from the publisher prior to any
prohibited reproduction, storage in a retrieval system, or transmission in any form or by any
means, electronic, mechanical, photocopying, recording, or otherwise. For information regarding
permissions, request forms, and the appropriate contacts within the Pearson Education Global
Rights and Permissions department, please visit www.pearsoned.com/permissions/.
ISBN-13: 978-0-13-571672-4
ISBN-10: 0-13-571672-1
, Contents
Chapter 1 1
Chapter 2 12
Chapter 3 20
Chapter 4 49
Chapter 5 71
Chapter 6 115
Chapter 7 158
Chapter 8 177
Chapter 9 202
Chapter 10 221
Chapter 11 232
Chapter 12 267
Chapter 13 285
Chapter 14 330
Chapter 15 361
Chapter 16 398
Chapter 17 428
Chapter 18 474
Chapter 19 502
Chapter 20 513
iii
Copyright © 2021 Pearson Education, Inc.
, Solution Manual
FOR
APPLIED STATICS AND STRENGTH OF MATERIALS
Seventh Edition
George F. Limbrunner, P.E., (INACTIVE)
Craig T. D’Allaird, P.E.
NOTES:
1. The solutions presented herein are, in general, somewhat abbreviated to conserve space.
Very little explanation is furnished. Sketches are kept to a minimum. Few checks are shown.
2. The solutions follow the procedures developed in the examples in the text.
3. The solutions are based on the limited tables furnished in the text and/or the appendices.
The tables furnished are for the purposes of this text only and should not be used for design.
4. The solutions for the design problems are generally not the only solution nor are they
necessarily the most economical solutions.
5. Please note that problem numbers in the solution manual are depicted with both dashes (‐)
and periods (.) between the chapter and problem numbers. These are interchangeable.
6. It should be noted that the previous editions of the text used lowercase s to denote stresses.
This has changed in the 7th edition, but due to time constraints this solution manual has not
been completely updated to reflect such.
7. If you find errors in this manual or in the text, please forward them to me at
.
Craig T. D’Allaird
Troy, NY
January 2021
iv
Copyright © 2021 Pearson Education, Inc.
