IMSA WORKZONE EXAM | QUESTIONS WITH COMPLETE
SOLUTION | 100% CORRECT
On the shoulder adjacent to traffic being controlled - The work zone starts at the first
advance warning sign; therefore, where should the flagger stand when directing traffic in
a TTC zone?
three - How many orange and black TTC signs should there be in each direction on a
2-way, 2-lane rural roadway?
500 ft. - What should the sign spacing be on a two-lane, two-way rural highway?
350 ft - How many feet apart should the advanced warning signs be on a high speed
urban roadway?
on the left hand side of the highway - For additional emphasis on a high speed urban
roadway, signs may be posted: _________
The distance required to safely route traffic from one lane to another - Taper length
refers to:
speed and width of lane closed - taper length is based on:
equal in feet to the speed limit - in a taper, the maximum distance between
channelizing devices should be:
traffic should pass to the left - on a barricade, if the stripes start at the upper right side
and angle down to the lower left side: ________
at least 28" tall and retroreflectorized with at least two white bands and two orange
bands - at night and/or on high speed roads greater than 45 mph, cones shall be:
__________
at the beginning of the taper - one a rural two-lane road, where would you place the
flagger in respect to the beginning of the taper for a closed lane?
1) Type of work to be done
2) traffic volume
3) traffic speed
, 4) school bus routes - What are some factors that should be considered in formulating
a TTC plan?
diversion - the rerouting of traffic onto a temporary bypass road is known as a:
__________
removed by grinding - pavement markings no longer needed should be:
routinely - a TTC zone should be checked:
Standard Statement - in the MUTCD a mandatory condition is a:
a statement of a permissive condition - in the mutcd an option is:
temporary traffic control plan - A TTC plan is a:
typical application drawings - A TTC plan should include:
be trained and/or certified - The MUTCD states that individuals responsible for the
implementation of TTC measures should:
1) traffic safety, movement, and guidance
2) TTC zone inspection
3) TTC zone maintenance - TTC principles and procedures should include:
during both day and night - work zones should be inspected:
guidance statement - a recommended practice in the MUTCD is a _______
option statement - a permissive condition in the MUTCD is an ________
tort - a _____ in legal terminology is *Civil Wrong* other than a beach of contract for
which a court will provide a remedy
legal obligation - *Liability* for a tort means the ____________ to pay monetary
damages to the person injured or damaged
1) the failure to do something that reasonable person would ordinarily do
2) the doing of something that an ordinary person would not ordinarily do
3) the failure to use ordinary care - Negligence can be defined as:
duty - the obligation for a person to conform to a certain standard of conduct is the
definition of:
accepted standards and guidelines - the MUTCD is an example of:
SOLUTION | 100% CORRECT
On the shoulder adjacent to traffic being controlled - The work zone starts at the first
advance warning sign; therefore, where should the flagger stand when directing traffic in
a TTC zone?
three - How many orange and black TTC signs should there be in each direction on a
2-way, 2-lane rural roadway?
500 ft. - What should the sign spacing be on a two-lane, two-way rural highway?
350 ft - How many feet apart should the advanced warning signs be on a high speed
urban roadway?
on the left hand side of the highway - For additional emphasis on a high speed urban
roadway, signs may be posted: _________
The distance required to safely route traffic from one lane to another - Taper length
refers to:
speed and width of lane closed - taper length is based on:
equal in feet to the speed limit - in a taper, the maximum distance between
channelizing devices should be:
traffic should pass to the left - on a barricade, if the stripes start at the upper right side
and angle down to the lower left side: ________
at least 28" tall and retroreflectorized with at least two white bands and two orange
bands - at night and/or on high speed roads greater than 45 mph, cones shall be:
__________
at the beginning of the taper - one a rural two-lane road, where would you place the
flagger in respect to the beginning of the taper for a closed lane?
1) Type of work to be done
2) traffic volume
3) traffic speed
, 4) school bus routes - What are some factors that should be considered in formulating
a TTC plan?
diversion - the rerouting of traffic onto a temporary bypass road is known as a:
__________
removed by grinding - pavement markings no longer needed should be:
routinely - a TTC zone should be checked:
Standard Statement - in the MUTCD a mandatory condition is a:
a statement of a permissive condition - in the mutcd an option is:
temporary traffic control plan - A TTC plan is a:
typical application drawings - A TTC plan should include:
be trained and/or certified - The MUTCD states that individuals responsible for the
implementation of TTC measures should:
1) traffic safety, movement, and guidance
2) TTC zone inspection
3) TTC zone maintenance - TTC principles and procedures should include:
during both day and night - work zones should be inspected:
guidance statement - a recommended practice in the MUTCD is a _______
option statement - a permissive condition in the MUTCD is an ________
tort - a _____ in legal terminology is *Civil Wrong* other than a beach of contract for
which a court will provide a remedy
legal obligation - *Liability* for a tort means the ____________ to pay monetary
damages to the person injured or damaged
1) the failure to do something that reasonable person would ordinarily do
2) the doing of something that an ordinary person would not ordinarily do
3) the failure to use ordinary care - Negligence can be defined as:
duty - the obligation for a person to conform to a certain standard of conduct is the
definition of:
accepted standards and guidelines - the MUTCD is an example of:
