Name: Score:
160 Multiple choice questions
Term 1 of 160
One of the following, the LEAST important benefit of safety and health training is
Reframing
Torture and punishment
Medication evaluation
Attitude adjustment
Term 2 of 160
During a periodic inspection of chains, the condition that LEAST affects metallurgic failure:
Corrosion pits in the links
Bent links
Painted links
Ground
Term 3 of 160
When in use, electrical power tools and cords must:
Make use of ground fault circuit interrupters or be a part of an assured grounding
conductor program
Ensure all tools are stored in a locked cabinet when not in use
Require all workers to wear safety goggles at all times
Use only battery-operated tools to avoid electrical hazards
,Term 4 of 160
Competent person
The shipper
Painted links
In their work area
One who is capable of identifying existing and predictable hazards in the surroundings
or working conditions which are unsanitary, hazardous, or dangerous to employees, and
who has authorization to take prompt corrective measures to eliminate them
Term 5 of 160
Effective training is enhanced by using lesson plans which are designed to?
Ensure all trainees pass a written exam
Focus solely on hands-on training without any planning
Limit the training to only safety procedures
Provide the instructor with standardized guidance for training session
Term 6 of 160
The PRIMARY root cause(s) for accidents are:
Environmental factors
Physical factors
Human factors
Combinations of causal factors
,Term 7 of 160
A safety inspector observes the back of a rough terrain forklift tip is a heavy load is being lifted
on a job site. The best course of action is...
do not continue with this lift
tip the mast back once the load is lifted
add extra counter weight to stabilize the operation
add air to the load side of the tires
Term 8 of 160
What mishaps require reporting to OSHA within 8 hours?
The occurrence of minor injuries that do not require medical attention
The fatality of one or more employees, because of a work-related incident
The completion of routine maintenance checks on equipment
The reporting of safety training sessions conducted for employees
Term 9 of 160
When working on a scaffold 20 feet high who must approve the scaffold for use?
The crane operator
The competent person
The crane manufacturer
The shift supervisor
Term 10 of 160
Communication is BEST defined as
The process of gathering feedback from employees
The act of sending messages without expecting a response
Only conveying instructions to subordinates
Sharing information and/or ideas with others and being understood
, Term 11 of 160
Safety training is best delivered
The front-line supervisor
The competent person
A contracted trainer
An osha compliance officer
Term 12 of 160
Workers must be trained on all hazardous chemicals:
On the road
Combinations of causal factors
In their work area
Privately in a conference room
Term 13 of 160
A worker arrives on site with own PPE. Who is responsible to ensure the PPE is appropriate for
the job?
Owner
Supervisor
Employer
Worker
160 Multiple choice questions
Term 1 of 160
One of the following, the LEAST important benefit of safety and health training is
Reframing
Torture and punishment
Medication evaluation
Attitude adjustment
Term 2 of 160
During a periodic inspection of chains, the condition that LEAST affects metallurgic failure:
Corrosion pits in the links
Bent links
Painted links
Ground
Term 3 of 160
When in use, electrical power tools and cords must:
Make use of ground fault circuit interrupters or be a part of an assured grounding
conductor program
Ensure all tools are stored in a locked cabinet when not in use
Require all workers to wear safety goggles at all times
Use only battery-operated tools to avoid electrical hazards
,Term 4 of 160
Competent person
The shipper
Painted links
In their work area
One who is capable of identifying existing and predictable hazards in the surroundings
or working conditions which are unsanitary, hazardous, or dangerous to employees, and
who has authorization to take prompt corrective measures to eliminate them
Term 5 of 160
Effective training is enhanced by using lesson plans which are designed to?
Ensure all trainees pass a written exam
Focus solely on hands-on training without any planning
Limit the training to only safety procedures
Provide the instructor with standardized guidance for training session
Term 6 of 160
The PRIMARY root cause(s) for accidents are:
Environmental factors
Physical factors
Human factors
Combinations of causal factors
,Term 7 of 160
A safety inspector observes the back of a rough terrain forklift tip is a heavy load is being lifted
on a job site. The best course of action is...
do not continue with this lift
tip the mast back once the load is lifted
add extra counter weight to stabilize the operation
add air to the load side of the tires
Term 8 of 160
What mishaps require reporting to OSHA within 8 hours?
The occurrence of minor injuries that do not require medical attention
The fatality of one or more employees, because of a work-related incident
The completion of routine maintenance checks on equipment
The reporting of safety training sessions conducted for employees
Term 9 of 160
When working on a scaffold 20 feet high who must approve the scaffold for use?
The crane operator
The competent person
The crane manufacturer
The shift supervisor
Term 10 of 160
Communication is BEST defined as
The process of gathering feedback from employees
The act of sending messages without expecting a response
Only conveying instructions to subordinates
Sharing information and/or ideas with others and being understood
, Term 11 of 160
Safety training is best delivered
The front-line supervisor
The competent person
A contracted trainer
An osha compliance officer
Term 12 of 160
Workers must be trained on all hazardous chemicals:
On the road
Combinations of causal factors
In their work area
Privately in a conference room
Term 13 of 160
A worker arrives on site with own PPE. Who is responsible to ensure the PPE is appropriate for
the job?
Owner
Supervisor
Employer
Worker
