ASQ CQT CERTIFICATION EXAM SAMPLE
QUESTIONS
Start your Preparation for ASQ CQT and become ASQ Certified Quality Technician
certified with ProcessExam.com. Here you get online practice tests prepared and
approved by ASQ certified experts based on their own certification exam experience.
Here, you also get the detailed and regularly updated syllabus for ASQ CQT.
ASQ CQT practice tests provided by the ProcessExam.com is just one of the promising
techniques of preparation for the CQT exam. This ASQ Certified Quality Technician
practice tests are composed by a team of experienced professionals. Upgraded Quality
Technician practice questions will give you the useful experience of learning for the
ASQ CQT exam. You can gain the ASQ Certified Quality Technician (CQT) certification
on the first go with the help of the CQT practice questions. - Answers-Getting that ASQ
CQT certification is a great first step and these practice tests can help you toward a
better score. Millions of aspirants have become certified with our practice tests. Give
your preparation a new edge with ProcessExam.com practice tests.
Question: 01. Who is responsible for determining whether a follow-up response is
sufficient to close out an internal audit?
a) Executive management
b) The quality manager
c) The audit team leader
d) The internal auditee - Answers-Answer:
c) The audit team leader
Question: 06. Under which of the following circumstances can the calibration interval of
a gage be lengthened?
a) No defective parts were produced that were checked with the gage.
b) The production rate of the parts checked with the gage increases.
c) The inspection department requests the change in writing.
d) History indicates satisfactory calibration performance. - Answers-Answer:
d) History indicates satisfactory calibration performance.
Question: 02. The reduction or elimination of incoming inspection stations should be
considered only when
a) evidence of supplier process control techniques is provided for the material used
b) evidence of a high defect rate is present in the manufacturing operation
c) the next process step will mask defects
d) it is cost-prohibitive to the supplier to test the parts - Answers-Answer:
QUESTIONS
Start your Preparation for ASQ CQT and become ASQ Certified Quality Technician
certified with ProcessExam.com. Here you get online practice tests prepared and
approved by ASQ certified experts based on their own certification exam experience.
Here, you also get the detailed and regularly updated syllabus for ASQ CQT.
ASQ CQT practice tests provided by the ProcessExam.com is just one of the promising
techniques of preparation for the CQT exam. This ASQ Certified Quality Technician
practice tests are composed by a team of experienced professionals. Upgraded Quality
Technician practice questions will give you the useful experience of learning for the
ASQ CQT exam. You can gain the ASQ Certified Quality Technician (CQT) certification
on the first go with the help of the CQT practice questions. - Answers-Getting that ASQ
CQT certification is a great first step and these practice tests can help you toward a
better score. Millions of aspirants have become certified with our practice tests. Give
your preparation a new edge with ProcessExam.com practice tests.
Question: 01. Who is responsible for determining whether a follow-up response is
sufficient to close out an internal audit?
a) Executive management
b) The quality manager
c) The audit team leader
d) The internal auditee - Answers-Answer:
c) The audit team leader
Question: 06. Under which of the following circumstances can the calibration interval of
a gage be lengthened?
a) No defective parts were produced that were checked with the gage.
b) The production rate of the parts checked with the gage increases.
c) The inspection department requests the change in writing.
d) History indicates satisfactory calibration performance. - Answers-Answer:
d) History indicates satisfactory calibration performance.
Question: 02. The reduction or elimination of incoming inspection stations should be
considered only when
a) evidence of supplier process control techniques is provided for the material used
b) evidence of a high defect rate is present in the manufacturing operation
c) the next process step will mask defects
d) it is cost-prohibitive to the supplier to test the parts - Answers-Answer:
