Written by students who passed Immediately available after payment Read online or as PDF Wrong document? Swap it for free 4.6 TrustPilot
logo-home
Exam (elaborations)

ASE Brakes A5 Test ( Exam 2 ) Study Questions and Answers

Rating
-
Sold
-
Pages
29
Grade
A+
Uploaded on
23-10-2024
Written in
2024/2025

ASE Brakes A5 Test ( Exam 2 ) Study Questions and Answers The brakes are dragging on a vehicle. this could be cause by a. overfilled master cylinder reservoir b. low vacuum to the boost c. bypassing master cylinder d. quick take-up valve stuck open - Ans:-A : overfilled master cylinder reservoir why : an overfilled master cylinder reservoir cylinder would not allow for fluid expansion. this would cause the brakes to self apply as the fluid expanded as result in brake drag The brake pads are worn at an angle on a vehicle with a sliding brake caliper system. which of the following is most likely the cause? ©GRACEAMELIA 2024/2025 ACADEMIC YEAR. ALL RIGHTS RESERVED FIRST PUBLISH OCTOBER 2024 Page 2/29 a. worn caliper piston b. worn caliper bushings c. leaking caliper seal d. leaking caliper boot - Ans:-B : worn caliper bushings why : worn bushings can cause the caliper to cock during operation. this could cause the pads to wear at an angle A diagnostic trouble code is set for an open wheel speed sensor on the left front sensor. The technician measures the resistance at the sensor and finds it to be within specification. Which of the following is the most likely cause for the wheel speed sensor code? a. faulty ABS computer b. open fuse c. open wiring from the computer to the wheel speed sensor d. shorted left front ABS modulator valve - Ans:-C : open wiring from the computer to the wheel speed sensor ©GRACEAMELIA 2024/2025 ACADEMIC YEAR. ALL RIGHTS RESERVED FIRST PUBLISH OCTOBER 2024 Page 3/29 why : an open in the wiring from the sensor to the computer would cause a diagnostic trouble code to be set and the sensor to have the correct resistance The brake warning lamp pictured above (pg. 56) stays on any time the ignition switch is on. Tech A says this could be caused by a poor ground at the parking brake switch. Tech B says this could be caused by a poor ground at the brake warning lamp switch. Who is correct? a. A only b. B only c. A & B d. neither A or B - Ans:-D : neither A or B why : neither technician is correct. there is a ground present at all times to cause the light to be on all the time Which of the following is true concerning the above caliper? ( pg. 57 ) ©GRACEAMELIA 2024/2025 ACADEMIC YEAR. ALL RIGHTS RESERVED FIRST PUBLISH OCTOBER 2024 Page 4/29 a. this caliper incorporates the parking brake b. this caliper can only be used on the front c. this caliper can only be used with Type 5 brake fluid d. this caliper must be replaced at each brake pad replacement - Ans:-A : this caliper incorporates the parking brake why : ^^^ Tech A says a double flare line should be replaced with an ISO flare line. Tech B says an ISO flare line should be replaced with a double flare line. Who is correct? a. A only b. B only c. A & B d. neither - Ans:-D : neither ©GRACEAMELIA 2024/2025 ACADEMIC YEAR. ALL RIGHTS RESERVED FIRST PUBLISH OCTOBER 2024 Page 5/29 why : neither technician is correct While testing the system shown above ( pg. 58 ), the technician finds there is no assist from the booster after the engine is shut off. Which of the following is the most likely correct? a. a faulty back-up EH pump b. a faulty accumulator c. a bypassing master cylinder d. a bypassing brake booster - Ans:-A : a faulty back-up EH pump why : the accumulator could be faulty and not storing pressure A customer is concerned that under heavy acceleration on dry pavement the traction control light comes on and the throttle momentarily becomes unresponsive. Which of t

Show more Read less
Institution
ASE
Course
ASE

Content preview

©GRACEAMELIA 2024/2025 ACADEMIC YEAR. ALL RIGHTS RESERVED

FIRST PUBLISH OCTOBER 2024




ASE Brakes A5 Test ( Exam 2 ) Study
Questions and Answers

The brakes are dragging on a vehicle. this could be cause by




a. overfilled master cylinder reservoir


b. low vacuum to the boost


c. bypassing master cylinder


d. quick take-up valve stuck open - Ans:✔✔-A : overfilled master cylinder reservoir




why : an overfilled master cylinder reservoir cylinder would not allow for fluid expansion. this would

cause the brakes to self apply as the fluid expanded as result in brake drag


The brake pads are worn at an angle on a vehicle with a sliding brake caliper system. which of the

following is most likely the cause?




Page 1/29

, ©GRACEAMELIA 2024/2025 ACADEMIC YEAR. ALL RIGHTS RESERVED

FIRST PUBLISH OCTOBER 2024




a. worn caliper piston


b. worn caliper bushings


c. leaking caliper seal


d. leaking caliper boot - Ans:✔✔-B : worn caliper bushings




why : worn bushings can cause the caliper to cock during operation. this could cause the pads to wear at

an angle


A diagnostic trouble code is set for an open wheel speed sensor on the left front sensor. The technician

measures the resistance at the sensor and finds it to be within specification. Which of the following is

the most likely cause for the wheel speed sensor code?




a. faulty ABS computer


b. open fuse


c. open wiring from the computer to the wheel speed sensor


d. shorted left front ABS modulator valve - Ans:✔✔-C : open wiring from the computer to the wheel

speed sensor

Page 2/29

, ©GRACEAMELIA 2024/2025 ACADEMIC YEAR. ALL RIGHTS RESERVED

FIRST PUBLISH OCTOBER 2024




why : an open in the wiring from the sensor to the computer would cause a diagnostic trouble code to

be set and the sensor to have the correct resistance


The brake warning lamp pictured above (pg. 56) stays on any time the ignition switch is on. Tech A says

this could be caused by a poor ground at the parking brake switch. Tech B says this could be caused by a

poor ground at the brake warning lamp switch. Who is correct?




a. A only


b. B only


c. A & B


d. neither A or B - Ans:✔✔-D : neither A or B




why : neither technician is correct. there is a ground present at all times to cause the light to be on all

the time


Which of the following is true concerning the above caliper? ( pg. 57 )




Page 3/29

Written for

Institution
ASE
Course
ASE

Document information

Uploaded on
October 23, 2024
Number of pages
29
Written in
2024/2025
Type
Exam (elaborations)
Contains
Questions & answers

Subjects

$12.99
Get access to the full document:

Wrong document? Swap it for free Within 14 days of purchase and before downloading, you can choose a different document. You can simply spend the amount again.
Written by students who passed
Immediately available after payment
Read online or as PDF

Get to know the seller

Seller avatar
Reputation scores are based on the amount of documents a seller has sold for a fee and the reviews they have received for those documents. There are three levels: Bronze, Silver and Gold. The better the reputation, the more your can rely on the quality of the sellers work.
GraceAmelia West Virginia University
Follow You need to be logged in order to follow users or courses
Sold
99
Member since
2 year
Number of followers
32
Documents
8971
Last sold
1 month ago
GraceAmelia\'s Emporium

Get a well Researched and Accurate Study Materials to Boost Your Grades and Excel Academically Offered by Seller Grace.

2.8

8 reviews

5
2
4
1
3
1
2
1
1
3

Recently viewed by you

Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Working on your references?

Create accurate citations in APA, MLA and Harvard with our free citation generator.

Working on your references?

Frequently asked questions