ASE Collision Repair and Refinish Test Questions and Answers

ASE Collision Repair and Refinish Test Questions and Answers Painter A says that metal conditioner should be used under plastic filler to assure proper adhesion. Painter B says that metal conditioner should be used under plastic filler only if rust is present. Who is right? (A) A only (C) Both A and B (B) B only (D) Neither A nor B - Ans:-* (D) Neither A nor B Painter A says that primer-surfacer will dry faster if it is sprayed in several coats with flash time between coats. Painter B says that there will be less bridging if all the primer-surfacer is sprayed in one application. Who is right? (A) A only (C) Both A and B (B) B only (D) Neither A nor B - Ans:-* (A) A only ©GRACEAMELIA 2024/2025 ACADEMIC YEAR. ALL RIGHTS RESERVED FIRST PUBLISH OCTOBER 2024 Page 2/4 Before applying paint, a painter should select the fluid nozzle and needle based on the: (A) size of the job. (C) spray booth manufacturer. (B) type of coating. (D) painter preference. - Ans:-* (B) type of coating Which of these could cause swirl marks when machine polishing or glazing a clear coat? (A) Moving the polisher too slowly (B) Using a low-speed polisher (C) Using a pad that is too coarse (D) Applying the polishing compound too thickly - Ans:-* (C) Using a pad that is too coarse To remove orange peel from a painted surface, the painter should wet sand with: (A) # 1200 and compound. (B) # 600 and clearcoat. (C) # 400 and colorcoat. (D) # 320 seal, and clearcoat. - Ans:-* (A) # 1200 and co