©GRACEAMELIA 2024/2025 ACADEMIC YEAR. ALL RIGHTS RESERVED
FIRST PUBLISH OCTOBER 2024
Testout Network Pro Exam Questions
and Answers 100% Pass
You manage a network with a single switch. On each switch port, a hub connects multiple devices to the
switch.
which condition are you most likely to experience on the network ? - Ans:✔✔-collisions
select the statement that best describes a broadcast storm. - Ans:✔✔-A Broadcast storm occurs when
there are so many broadcast messages on the network that they approach or exceed the network
bandwidth..
Which of the following solutions would you implement to eliminate switching loops? - Ans:✔✔-spanning
tree
You manage a network that uses a single switch. All ports within your buildings connect through he
single switch . Which feature should you implement? - Ans:✔✔-VLANs
You manage a network that uses multiple switches. You want to provide multiple paths between
switches so that if one link goes down, an alternate path is available.
Which feature should your switch support? - Ans:✔✔-spanning tree
Page 1/37
, ©GRACEAMELIA 2024/2025 ACADEMIC YEAR. ALL RIGHTS RESERVED
FIRST PUBLISH OCTOBER 2024
You run a small network for your business that has a single router connected to the internet and a single
switch. You keep sensitive doc.
What should you use for this situation? - Ans:✔✔-VLAN
You manage a single subnet with three switches. The switches are connected to provide redundant paths
between the switches.
Which feature prevents switching loops and ensures there is only a single active patch between any two
switches? - Ans:✔✔-Spanning tree
Which feature prevents switching loops and ensures there is only a single active path between any two
switches? - Ans:✔✔-spanning trees
A user reports that network access from her workstation is very slow. The problem does not seem to be
affecting any other users.
Which of the following conditions is the most likely cause? - Ans:✔✔-Duplex mismatch
You manage a local area network with several switches. A new employee has started today so you
connect her workstation to a switch port.
Page 2/37
, ©GRACEAMELIA 2024/2025 ACADEMIC YEAR. ALL RIGHTS RESERVED
FIRST PUBLISH OCTOBER 2024
Which of the following is the most likely cause of the problem? - Ans:✔✔-Incorrect VLAN assignment
You manage a network with multiple switches. You find that your switches are experiencing heavy
broadcast storms.
Which of the following will help reduce the effects of a broadcast storm? - Ans:✔✔-Enable spanning tree
on the switches
Which of the following solutions would you implement to eliminate switching loops? - Ans:✔✔-spanning
tree
While viewing the status of the interfaces on a Cisco switch, you see abnormally large of oversized
ethernet frames being received on one interface. This interface is connected to a workstation located on
the 2nd floor.
What could be causing this to happen? - Ans:✔✔-The workstation's network board is jabbering
The network board in a workstation is currently configured as follows: - Ans:✔✔-show running-config
interface
show interface
You manage a single subnet with three switches. The switches are connected to provide redundant paths
between the switches.
Page 3/37
, ©GRACEAMELIA 2024/2025 ACADEMIC YEAR. ALL RIGHTS RESERVED
FIRST PUBLISH OCTOBER 2024
Which feature allows the switches to pass VLAN traffic between the switches? - Ans:✔✔-Trunking
You manage a network with two switches. The switches are connected together through their Gigabit
Ethernet uplink ports.
You define VLAN 1 and VLAN 2 on each switch. A device on the first switch in VLAN 1 needs to
communicate with a device on the second switch also in VLAN 1.
What should you configure to allow communication between these two devices through the switches? -
Ans:✔✔-Trunking
When configuring VLANs on a switch, what type of switch ports are members of all VLANs defined on the
switch? - Ans:✔✔-Trunk Ports
Computers A and B are on the same VLAN and are separated by two switches, as shown in the exhibit.
Computer A sends a Fram to Computer B.
Which of the following best describes the composition of the frame as it travels from A to B? - Ans:✔✔-
Computer A sends a normal frame. The first switch appends a VLAN ID to the frame. The second switch
removes the VLAN ID before forwarding it to Computer B.
Which of the following statements accurately describes a VLAN ID? - Ans:✔✔-Switches append a VLAN
ID to the header of each frame to identify the virtual network to which it belongs.
Page 4/37
FIRST PUBLISH OCTOBER 2024
Testout Network Pro Exam Questions
and Answers 100% Pass
You manage a network with a single switch. On each switch port, a hub connects multiple devices to the
switch.
which condition are you most likely to experience on the network ? - Ans:✔✔-collisions
select the statement that best describes a broadcast storm. - Ans:✔✔-A Broadcast storm occurs when
there are so many broadcast messages on the network that they approach or exceed the network
bandwidth..
Which of the following solutions would you implement to eliminate switching loops? - Ans:✔✔-spanning
tree
You manage a network that uses a single switch. All ports within your buildings connect through he
single switch . Which feature should you implement? - Ans:✔✔-VLANs
You manage a network that uses multiple switches. You want to provide multiple paths between
switches so that if one link goes down, an alternate path is available.
Which feature should your switch support? - Ans:✔✔-spanning tree
Page 1/37
, ©GRACEAMELIA 2024/2025 ACADEMIC YEAR. ALL RIGHTS RESERVED
FIRST PUBLISH OCTOBER 2024
You run a small network for your business that has a single router connected to the internet and a single
switch. You keep sensitive doc.
What should you use for this situation? - Ans:✔✔-VLAN
You manage a single subnet with three switches. The switches are connected to provide redundant paths
between the switches.
Which feature prevents switching loops and ensures there is only a single active patch between any two
switches? - Ans:✔✔-Spanning tree
Which feature prevents switching loops and ensures there is only a single active path between any two
switches? - Ans:✔✔-spanning trees
A user reports that network access from her workstation is very slow. The problem does not seem to be
affecting any other users.
Which of the following conditions is the most likely cause? - Ans:✔✔-Duplex mismatch
You manage a local area network with several switches. A new employee has started today so you
connect her workstation to a switch port.
Page 2/37
, ©GRACEAMELIA 2024/2025 ACADEMIC YEAR. ALL RIGHTS RESERVED
FIRST PUBLISH OCTOBER 2024
Which of the following is the most likely cause of the problem? - Ans:✔✔-Incorrect VLAN assignment
You manage a network with multiple switches. You find that your switches are experiencing heavy
broadcast storms.
Which of the following will help reduce the effects of a broadcast storm? - Ans:✔✔-Enable spanning tree
on the switches
Which of the following solutions would you implement to eliminate switching loops? - Ans:✔✔-spanning
tree
While viewing the status of the interfaces on a Cisco switch, you see abnormally large of oversized
ethernet frames being received on one interface. This interface is connected to a workstation located on
the 2nd floor.
What could be causing this to happen? - Ans:✔✔-The workstation's network board is jabbering
The network board in a workstation is currently configured as follows: - Ans:✔✔-show running-config
interface
show interface
You manage a single subnet with three switches. The switches are connected to provide redundant paths
between the switches.
Page 3/37
, ©GRACEAMELIA 2024/2025 ACADEMIC YEAR. ALL RIGHTS RESERVED
FIRST PUBLISH OCTOBER 2024
Which feature allows the switches to pass VLAN traffic between the switches? - Ans:✔✔-Trunking
You manage a network with two switches. The switches are connected together through their Gigabit
Ethernet uplink ports.
You define VLAN 1 and VLAN 2 on each switch. A device on the first switch in VLAN 1 needs to
communicate with a device on the second switch also in VLAN 1.
What should you configure to allow communication between these two devices through the switches? -
Ans:✔✔-Trunking
When configuring VLANs on a switch, what type of switch ports are members of all VLANs defined on the
switch? - Ans:✔✔-Trunk Ports
Computers A and B are on the same VLAN and are separated by two switches, as shown in the exhibit.
Computer A sends a Fram to Computer B.
Which of the following best describes the composition of the frame as it travels from A to B? - Ans:✔✔-
Computer A sends a normal frame. The first switch appends a VLAN ID to the frame. The second switch
removes the VLAN ID before forwarding it to Computer B.
Which of the following statements accurately describes a VLAN ID? - Ans:✔✔-Switches append a VLAN
ID to the header of each frame to identify the virtual network to which it belongs.
Page 4/37
