CHAMPIONS POWERHOUSE TRAINING EXAM 2024
ACTUAL EXAM COMPLETE 350 QUESTIONS WITH
DETAILED VERIFIED ANSWERS (100% CORRECT
ANSWERS) / ALREADY GRADED A+
Relative to plant maintenance, a power engineer should have
easy access to
a) all ASME codes
b) the Chief Inspector
c) the Workers' Compensation Board Accident Prevention
Regulations
d) all plant maintenance records and schedules
e) equipment suppliers - ANSWER: C
Damaged tools
a) are best disposed of or properly repaired
b) must be used carefully and cautiously if injury is to be
prevented
c) should be kept in a special tool box
d) should be of no concern to the user
e) should be replaced under their "Lifetime" warranty - ANSWER: A
Who is responsible for providing safe working conditions in
the plant?
a) Management
b) The Boilers Branch
c) Worker's Compensation (Occupational Health and Safety)
d) The ASME code
e) The union - ANSWER: A
A file which is always single cut is the
a) hand file
b) mill file
c) warding file
d) knife file
e) pillar file - ANSWER: B
Taper, plug, and bottoming are types of
a) wrenches
b) dies
, c) files
d) punches
e) taps - ANSWER: E
A collet is
a) a type of hole punch
b) used to make a square hole in a piece of plate
c) the moving part of a micrometer
d) a type of face spanner wrench
e) a holder for a thread die - ANSWER: E
The thread pitch of a metric micrometer is
a) 0.5 mm
b) 2.5 mm
c) 5 mm
d) 0.25 mm
e) 0.05 mm - ANSWER: A
To measure valve tappet clearances one would most aptly use
a) an inside micrometer
b) a thread micrometer
c) a depth micrometer
d) feeler gauges
e) round or fillet gauges - ANSWER: D
Copper sulphate may be used
a) as a thread cutting fluid
b) for lubricating very fine threads such as those in a
micrometer
c) for coating tools in order to prevent rusting
d) to free nuts which are corroded to bolts
e) as a marking material - ANSWER: E
In order to check the trueness of a flat surface, one would
use a
a) Vernier calliper
b) hermaphrodite divider
c) surface plate
d) layout bench
e) machinists square - ANSWER: C
A dressing tool is used to
ACTUAL EXAM COMPLETE 350 QUESTIONS WITH
DETAILED VERIFIED ANSWERS (100% CORRECT
ANSWERS) / ALREADY GRADED A+
Relative to plant maintenance, a power engineer should have
easy access to
a) all ASME codes
b) the Chief Inspector
c) the Workers' Compensation Board Accident Prevention
Regulations
d) all plant maintenance records and schedules
e) equipment suppliers - ANSWER: C
Damaged tools
a) are best disposed of or properly repaired
b) must be used carefully and cautiously if injury is to be
prevented
c) should be kept in a special tool box
d) should be of no concern to the user
e) should be replaced under their "Lifetime" warranty - ANSWER: A
Who is responsible for providing safe working conditions in
the plant?
a) Management
b) The Boilers Branch
c) Worker's Compensation (Occupational Health and Safety)
d) The ASME code
e) The union - ANSWER: A
A file which is always single cut is the
a) hand file
b) mill file
c) warding file
d) knife file
e) pillar file - ANSWER: B
Taper, plug, and bottoming are types of
a) wrenches
b) dies
, c) files
d) punches
e) taps - ANSWER: E
A collet is
a) a type of hole punch
b) used to make a square hole in a piece of plate
c) the moving part of a micrometer
d) a type of face spanner wrench
e) a holder for a thread die - ANSWER: E
The thread pitch of a metric micrometer is
a) 0.5 mm
b) 2.5 mm
c) 5 mm
d) 0.25 mm
e) 0.05 mm - ANSWER: A
To measure valve tappet clearances one would most aptly use
a) an inside micrometer
b) a thread micrometer
c) a depth micrometer
d) feeler gauges
e) round or fillet gauges - ANSWER: D
Copper sulphate may be used
a) as a thread cutting fluid
b) for lubricating very fine threads such as those in a
micrometer
c) for coating tools in order to prevent rusting
d) to free nuts which are corroded to bolts
e) as a marking material - ANSWER: E
In order to check the trueness of a flat surface, one would
use a
a) Vernier calliper
b) hermaphrodite divider
c) surface plate
d) layout bench
e) machinists square - ANSWER: C
A dressing tool is used to
