PHYSICAL SECURITY-- (SPED), Physical Security
Certification (PSC), DCSA SPeD: Physical
Security Certification (PSC) 266 Q&A
Warning signs must be posted at each boundary of a restricted area and must be conspicuous to
those approaching on foot or by vehicle. T/F - Answer: True
The use of master key systems is acceptable in the storage of AA&E. - Answer: False. The use of
master key systems is not authorized in AA&E storage facilities.
The first line of defense in any physical security system is usually some form of? - Answer:
perimeter protection system
What kind of fencing is used when a stationary perimeter requires protection? - Answer:
Permanent
Page 1 of 38
,What kind of fencing can be used as a temporary perimeter to establish psychological barriers
and to channel pedestrian and vehicle movement. - Answer: Temporary
The basic manual access control system is simply? - Answer: personal recognition.
Although there are many different types of locks, they all share three components. - Answer:
Locking device
Switching device
Operating mechanism
Some key-operated locks are built into the door or container they are securing. These are also
known as - Answer: Mortise locks, because their case is recessed, or mortised into a door or
container.
The __________________ is the most common of all door locks in use today. - Answer:
cylindrical lock
What kind of locks are used for securing classified information? - Answer: Electromechanical
combination locks
When a container is taken out of service, the combination must be reset back to the factory
settings. The factory setting for a built-in container lock is? - Answer: 50-25-50.
You just received a security container that has the S&G 2740 Electromechanical Safe Lock with a
factory setting of 50-25-50. What should you do first? - Answer: Calibrate the lock
Certification and accreditation (C&A) for Storage of Classified DoD Information Systems.
A. DoD Manual 5100.76M governs the C&A for Storage of Classified DoD Information Systems.
Page 2 of 38
,B. Designated Accrediting Authority (DAAs) have the authority and responsibility for
accreditation decisions. - Answer: B
A. Physical security is the branch of security that is only concerned with active measures
designed to prevent unauthorized access.
B. Physical security aims to safeguard assets against espionage, sabotage, terrorism, damage,
and criminal activity. - Answer: B
Which of the following is true of access control measures? - Answer: Access control is integral
and interoperable part of DoD installation physical security programs.
The installation commander/facility director is responsible for defining access control measures
consistent with DoD policy.
Which of the following is NOT a physical security measure? - Answer: Marking classified
documents.
Name 3 physical security measures? - Answer: Perimeter Fences
Security Guards
Alarm Systems
What does a physical security program aim to prevent unauthorized access to? (4) - Answer:
Personnel
Equipment
Installations
Information
What are considered access control measures? (3) - Answer: Identification Cards
Security Guards
Locks and Keys
Page 3 of 38
, List the nine capabilities a security system must provide to achieve Security-in-Depth? - Answer:
Deter
Detect
Identify
Track
Assess
Record
Communicate
Delay
Respond
Describe the elements of a restricted area? - Answer: An area (land, sea, or air) in which there
are special restrictive measures employed to prevent or minimize incursions and/or
interference, or where special security measures are employed to prevent unauthorized entry.
Restricted areas must be authorized by the installation/activity commander/director, properly
posted, and employ physical security measures.
List three policies or regulations that govern the DoD physical security program? - Answer: DoD
5200.08-Regulation Physical Security Program
DoD Manual 5100.76 Physical Security of Sensitive Conventional Arms, Ammunition, and
Explosives (AA&E)
DoD Manual 5105.21 Sensitive Compartmented Information (SCI) Administrative Security
Manual: Administration of Physical Security, Visitor Control, and Technical Security
Page 4 of 38
Certification (PSC), DCSA SPeD: Physical
Security Certification (PSC) 266 Q&A
Warning signs must be posted at each boundary of a restricted area and must be conspicuous to
those approaching on foot or by vehicle. T/F - Answer: True
The use of master key systems is acceptable in the storage of AA&E. - Answer: False. The use of
master key systems is not authorized in AA&E storage facilities.
The first line of defense in any physical security system is usually some form of? - Answer:
perimeter protection system
What kind of fencing is used when a stationary perimeter requires protection? - Answer:
Permanent
Page 1 of 38
,What kind of fencing can be used as a temporary perimeter to establish psychological barriers
and to channel pedestrian and vehicle movement. - Answer: Temporary
The basic manual access control system is simply? - Answer: personal recognition.
Although there are many different types of locks, they all share three components. - Answer:
Locking device
Switching device
Operating mechanism
Some key-operated locks are built into the door or container they are securing. These are also
known as - Answer: Mortise locks, because their case is recessed, or mortised into a door or
container.
The __________________ is the most common of all door locks in use today. - Answer:
cylindrical lock
What kind of locks are used for securing classified information? - Answer: Electromechanical
combination locks
When a container is taken out of service, the combination must be reset back to the factory
settings. The factory setting for a built-in container lock is? - Answer: 50-25-50.
You just received a security container that has the S&G 2740 Electromechanical Safe Lock with a
factory setting of 50-25-50. What should you do first? - Answer: Calibrate the lock
Certification and accreditation (C&A) for Storage of Classified DoD Information Systems.
A. DoD Manual 5100.76M governs the C&A for Storage of Classified DoD Information Systems.
Page 2 of 38
,B. Designated Accrediting Authority (DAAs) have the authority and responsibility for
accreditation decisions. - Answer: B
A. Physical security is the branch of security that is only concerned with active measures
designed to prevent unauthorized access.
B. Physical security aims to safeguard assets against espionage, sabotage, terrorism, damage,
and criminal activity. - Answer: B
Which of the following is true of access control measures? - Answer: Access control is integral
and interoperable part of DoD installation physical security programs.
The installation commander/facility director is responsible for defining access control measures
consistent with DoD policy.
Which of the following is NOT a physical security measure? - Answer: Marking classified
documents.
Name 3 physical security measures? - Answer: Perimeter Fences
Security Guards
Alarm Systems
What does a physical security program aim to prevent unauthorized access to? (4) - Answer:
Personnel
Equipment
Installations
Information
What are considered access control measures? (3) - Answer: Identification Cards
Security Guards
Locks and Keys
Page 3 of 38
, List the nine capabilities a security system must provide to achieve Security-in-Depth? - Answer:
Deter
Detect
Identify
Track
Assess
Record
Communicate
Delay
Respond
Describe the elements of a restricted area? - Answer: An area (land, sea, or air) in which there
are special restrictive measures employed to prevent or minimize incursions and/or
interference, or where special security measures are employed to prevent unauthorized entry.
Restricted areas must be authorized by the installation/activity commander/director, properly
posted, and employ physical security measures.
List three policies or regulations that govern the DoD physical security program? - Answer: DoD
5200.08-Regulation Physical Security Program
DoD Manual 5100.76 Physical Security of Sensitive Conventional Arms, Ammunition, and
Explosives (AA&E)
DoD Manual 5105.21 Sensitive Compartmented Information (SCI) Administrative Security
Manual: Administration of Physical Security, Visitor Control, and Technical Security
Page 4 of 38
