Texas Fire Alarm Rules and Statutes TFM11 Exam Questions
And 100% Correct Answers
What 6 things must be listed on a service label? - Answer 1. DO NOT REMOVE BY
ORDER OF THE TEXAS FIRE, MARSHALL
2. SERVICE RECORD
3. The firm's name address telephone number and registration number
4. Service date and Licensee signature and license number
5. A list of services performed
6. Type of service - either general service of a correction of conditions.
what does an inspection label show'? What color is it? -Answer It shows that an
inspection or test has taken place. It must be BLUE.
What 7 things should an inspection label show? -Answer 1. DO NOT REMOVE BY ORDER
OF THE TEXAS FIRE MARSHAL
2. INSPECTION/TEST RECORD
3. The firm's name, address, telephone and registration number
4. Inspection date and Licensee signature and license number
5. Type of inspection - New installs, Semi-annual, Quarterly or Annual
6. Date of last sensitivity test
7. Status of the system after inspection, and whether a red or yellow label was attached.
When should a Yellow label be used? - Answer If a system does not meet applicable
codes and standards
What will happen after a Yellow label has been attached? -Answer The property owner
and local jurisdiction, in writing, within 5 days of attachment of the label
,What 5 things are required to be on a Yellow label? -Answer 1. DO NOT REMOVE BY
ORDER OF THE TEXAS FIRE. MARSHALL
2. SYSTEM DOES NOT COMPLY WITH APPLICABLE CODES & STANDARDS
3. The firm's name, address, telephone and registration number.
4. Date label was attached and Licensee signature and license number.
5. A list of conditions resulting in the Yellow label
Where should a Yellow or Red label be attached? - Answer On the outside of the control
panel or in a permanent location
When should a Red 'label be used"? - Answer If a system does not function or is
inoperable
What does have to happen after a Red label is attached? -Answer The property owner or
occupant has to be orally notified immediately. The property owner and local
jurisdiction has to be in writing with 5 days of the attached label .
What 5 things does have to be listed on a red label? -Answer 1. DO NOT REMOVE BY
ORDER OF THE TEXAS STATE FlRE MARSHALL
2. Status of the system - Inoperable, Impaired or Fault.
3. The firm's name, address, telephone and registration number.
4. Date label was attached and Licensee signature and license number
5. A list of conditions resulting in the label
$500 - Response Initial Registration Certification Fee
$500 ($1000 after 2 yrs) - Response Renewal of a registration certificate for each year
, $250 annually ($500 for 2yrs) - Response Renewal of registration certification for selling
single station devices
$150 - Response Initial Branch office registration certificate
$500 annually - Response Initial/Renewal training school approval fee
$150 ($300 for 2 yrs) - Response Renewal of branch office registration certificate
annually
$50 per year - Response Initial/Renewal of a training school instructor approval
$120 - Response Initial license fee (non-residential)
$100 per year ($200 for 2 yrs) - Response License Renewal fee (non-residential)
$50 ($100 for 2yrs) - Response Initial license fees and annual renewal (Residential)
$30 - Response Initial Exam Fee
$20 - Response Re-exam fee
$20 - Response Fee for duplicate registration certificates, license, or changes
Monitoring - Answer Limited registration certificates are for organizations restricted to
_____________
Branch office registration certificate - Answer Each separate office location must have a
_____________
And 100% Correct Answers
What 6 things must be listed on a service label? - Answer 1. DO NOT REMOVE BY
ORDER OF THE TEXAS FIRE, MARSHALL
2. SERVICE RECORD
3. The firm's name address telephone number and registration number
4. Service date and Licensee signature and license number
5. A list of services performed
6. Type of service - either general service of a correction of conditions.
what does an inspection label show'? What color is it? -Answer It shows that an
inspection or test has taken place. It must be BLUE.
What 7 things should an inspection label show? -Answer 1. DO NOT REMOVE BY ORDER
OF THE TEXAS FIRE MARSHAL
2. INSPECTION/TEST RECORD
3. The firm's name, address, telephone and registration number
4. Inspection date and Licensee signature and license number
5. Type of inspection - New installs, Semi-annual, Quarterly or Annual
6. Date of last sensitivity test
7. Status of the system after inspection, and whether a red or yellow label was attached.
When should a Yellow label be used? - Answer If a system does not meet applicable
codes and standards
What will happen after a Yellow label has been attached? -Answer The property owner
and local jurisdiction, in writing, within 5 days of attachment of the label
,What 5 things are required to be on a Yellow label? -Answer 1. DO NOT REMOVE BY
ORDER OF THE TEXAS FIRE. MARSHALL
2. SYSTEM DOES NOT COMPLY WITH APPLICABLE CODES & STANDARDS
3. The firm's name, address, telephone and registration number.
4. Date label was attached and Licensee signature and license number.
5. A list of conditions resulting in the Yellow label
Where should a Yellow or Red label be attached? - Answer On the outside of the control
panel or in a permanent location
When should a Red 'label be used"? - Answer If a system does not function or is
inoperable
What does have to happen after a Red label is attached? -Answer The property owner or
occupant has to be orally notified immediately. The property owner and local
jurisdiction has to be in writing with 5 days of the attached label .
What 5 things does have to be listed on a red label? -Answer 1. DO NOT REMOVE BY
ORDER OF THE TEXAS STATE FlRE MARSHALL
2. Status of the system - Inoperable, Impaired or Fault.
3. The firm's name, address, telephone and registration number.
4. Date label was attached and Licensee signature and license number
5. A list of conditions resulting in the label
$500 - Response Initial Registration Certification Fee
$500 ($1000 after 2 yrs) - Response Renewal of a registration certificate for each year
, $250 annually ($500 for 2yrs) - Response Renewal of registration certification for selling
single station devices
$150 - Response Initial Branch office registration certificate
$500 annually - Response Initial/Renewal training school approval fee
$150 ($300 for 2 yrs) - Response Renewal of branch office registration certificate
annually
$50 per year - Response Initial/Renewal of a training school instructor approval
$120 - Response Initial license fee (non-residential)
$100 per year ($200 for 2 yrs) - Response License Renewal fee (non-residential)
$50 ($100 for 2yrs) - Response Initial license fees and annual renewal (Residential)
$30 - Response Initial Exam Fee
$20 - Response Re-exam fee
$20 - Response Fee for duplicate registration certificates, license, or changes
Monitoring - Answer Limited registration certificates are for organizations restricted to
_____________
Branch office registration certificate - Answer Each separate office location must have a
_____________
