157 Multiple choice questions
Term 1 of 157
The application of ____________ is the method most often used to control flammable liquid fires.
sand
dry chemical
foam
water
Term 2 of 157
The main advantage of the donut roll
The tool can break and injure the firefighter
Both ends are available on the outside of the roll
The hose can be rolled into a twin roll and secured by a portion of the hose itself
The female end is exposed and the male end is protected in the center of the roll
Term 3 of 157
Except for quick attack devices, it is not practical to set up master stream devices with anything
less than _______ 2½ inch hoselines.
2
they work best as life safety lines
immediately dangerous to life and health
six
,Term 4 of 157
A sprinkler storage cabinet is required to house a sprinkler wrench and a minimum of how many
spare sprinklers?
three
two
six
four
Term 5 of 157
A blue circle with a letter designation in the center would indicate an extinguisher is rated for use
on ____ fires
Os&y Valve
Class A Foam
Type C
Class C
Term 6 of 157
______________ may produce abnormally high heat intensity and may be confused with the use of
accelerants.
Polyurethane
Wood
Concrete
Glass
,Term 7 of 157
On a dry barrel hydrant, the valve that controls water flow to all outlets is located_____ of the
hydrant
at the base
in the middle section of the hydrant
on the side of the hydrant
at the top of the hydrant
Term 8 of 157
Halon fire extinguishers are primarily designed for use on ____ fires
Class a only
Class B and C
Wet Chemical System
Class C and d
Term 9 of 157
A cutting torch has a flame temperature of
3000 degrees f
5000 degrees f
7000 degrees f
1000 degrees f
, Term 10 of 157
A personnel accountability system tracks which firefighters are assigned to each vehicle and
Each crew's assignment
Simplicity of operation
Time spent in an idlh atmosphere
Progress benchmarks
Term 11 of 157
What is the device used to prevent a patio sliding door from being forced open?
lateral latch
burglar block
straight
slide preventer
Term 12 of 157
What is used to make the connection between the male and female ends of a fire hose
watertight?
clapper valve
swivel gasket
shank gasket
compression gasket