ANSWERS LATEST UPDATE A+ GRADED
Which statements are correct about Hardware Diagnostics (UEFI)
A. A subset of the UEFI Diagnostic tests is stored in the BIOS ROM.
D. They can be run from a USB key, the hard disk drive, or the BIOS.
Which menu item would you select to test the system memory? Click the correct
menu item in the graphic.
Component test
Which products support HP PC Hardware Diagnostics UEFI?
All Products since 2012 that support the UEFI BIOS
What do you need to create the 3-in-1 USB Key? (Select two.)
Blank USB key of 8GB or more
Which tools are included on the HP PC Diagnostics 3-in-1 USB Key? (Select
three.)
HP PC Hardware Diagnostics UEFI
BIOS recovery tool
HP Vision Diagnostics
You must program DMI on an HP commercial notebook. How can you determine
which tool to use?
Run Nbdmifit, which advises you of the correct utility.
Which tool should you use to configure the TPM firmware after you replace a
system board?
HP TPM Configuration SoftPaq
When must you verify the TPM version that is required by the customer?
When replacing the system board on a platform that supports TPM V1.2 and TPM V2.0
You have completed DMI programming and locked MPM. What should you do as
a final check to be sure DMI has been correctly programmed? (Select two.)
Boot the system and make sure there are no errors.
View System Information in HP Computer Setup
F10 KEY TO ACCESS BIOS
F10 KEY TO ACCESS BIOS
How should you always start DMI programming on a notebook that supports
Legacy boot?
Boot to the HP System Board Replacement & System Diagnostics Tool and then run
NBDMIFIT.
What must a customer do before sending in a system for repair? (Select two.)
Unlock encrypted drive or provide encryption keys.
Clear any BIOS passwords or provide them with the system.
You must program DMI on an HP commercial desktop with the legacy BIOS. What
option in the HP Setup Utility allows you to access the DMI update fields?