CMIT CERTIFICATION EXAM 2024 LATEST PRACTICE
QUESTION COMPLIED FROM REAL EXAM (200 multiple
choice) FULLY SOLVED
A CM's role and responsibilities are governed solely by the Owner/CM Agreement.
True False - ANSWER: True
There are two basic forms of CM, agency and at-risk. Each form provides for the
basic services of construction management practice. However, there are some key
differences. Which of the following do not apply to both CM forms?
A) Both forms provide advice to the owner on constructibility, budget and the
schedule.
B) Both require that the liabilities and risks assumed by the parties be clearly
understood, coordinated, and stated in the respective contracts.
C) Both forms allow the CM to function in an advisory role for the entire engagement
of the CM.
D) Services can vary based on the contractual relationships of the parties and the
risks that are assumed. - ANSWER: C) Both forms allow the CM to function in an
advisory role for the entire engagement of the CM.
Construction management had its beginnings in the early to mid-1960's. Which of
the following factors contributed to the initial use of this delivery system?
A) The need to reduce the overall time and cost associated with project delivery.
B) The increasing cost of money and the unpredictability of project funding streams.
C) The changing role of the general contractor and the increasing numbers of
specialty trade contractors.
D) All of the above. - ANSWER: D) All of the above.
The General Services Administration was the first federal agency to use construction
management. - ANSWER: True
The General Services Administration, the Department of Health, Education and
Welfare (now HHS), and the Veterans Administration ran into similar difficulties in
the use of construction management. Which of the following was/were common
problems for all three agencies?
A) Funding restrictions
B) Claims
C) Change conditions
D) All of the above - ANSWER: D) All of the above
CMAA was formed and incorporated 1982 with its primary focus being the growth
and development of the construction management profession. - ANSWER: True
The CMAA Construction Management Standards of Practice is intended as a guide to
the range of services that constitute professional construction management. They
seek to meet the documented need for definitions of what construction
,management services are, without unduly structuring the methodologies by which
those services are provided by the CM. - ANSWER: True
The goals of the Construction Management Association of America (CMAA) include:
A) Setting standards and developing contract documents for construction
management practice.
B) Expanding the understanding of the construction management concept and its
use in the marketplace.
C) Advocacy for construction management in the legislative, regulatory, and judicial
arenas of federal, state, and local governments.
D) All of the above. - ANSWER: D) All of the above
The fact that an individual is certified or licensed in any other profession does not,
per se, establish him/her as a qualified CM.
True False - ANSWER: True
Certification as a CM means the construction management practitioner has "state of
the art" knowledge and capability to practice construction management.
True False - ANSWER: False
Recruiting and training are business matters and normally do not involve ethical
concerns.
True False - ANSWER: False
Construction management is a concept that is susceptible to overselling.
True False - ANSWER: True
Failure to provide quality services is a business and not an ethical question.
True False - ANSWER: False
Contracting for adequate fees is both a business and an ethical issue.
True False - ANSWER: True
The ethics of the CM profession focus primarily on a CM's relationships in dealing
with its clients.
True False - ANSWER: True
The possible approaches for delivering a project are virtually unlimited. A key reason
for such variations is:
A) The different roles that can be assumed by project participants.
B) Different forms of contracts and methods of compensation that can be used.
C) The different levels of care, responsibility, and risks assumed by the parties
involved.
D) All of the above. - ANSWER: D) All of the above
The traditional delivery system is characterized by executing the major phases of a
project in:
, A) An overlapping concept
B) A linear sequence
C) A fast track method
D) All of the above - ANSWER: B) A linear sequence
A key advantage of the traditional delivery approach is:
A) With the traditional delivery system, the cost of the construction phase is known
before construction starts.
B) Facility features are fully determined & specified.
C) When the construction contract is signed, the major risk belongs to the
contractor.
D) All of the above - ANSWER: B) Facility features are fully determined & specified.
Design-build and at-risk construction management delivery systems allow the option
to fast-track or phase a project.
True False - ANSWER: True
Most definitions of construction management are similar. However, a contractual
definition is not known until:
A) The legal form of the CM contract is chosen.
B) The specific scope of services to be provided is identified.
C) The relationship of the CM to others and the risks and authority assumed by the
parties are clearly defined.
D) All of the above - ANSWER: D) All of the above
21.
In a CM-at-Risk arrangement once construction begins and the CM converts from the
professional advisory role of a CM to the contractual role of a general contractor, the
CM has no implied duties of loyalty and care to the owner.
True False - ANSWER: True
The agency CM does not perform design or actual construction work.
True False - ANSWER: True
Under the CM-at-Risk delivery method, the owner usually must deal with the hybrid
of a construction manager and a general contractor.
True False - ANSWER: True
Under a CM-at-risk contract, which of the following statements are true?
A) The CM, in most cases, holds the trade and/or specialty contracts.
B) The CM has the right to enforce the schedule, pay the trade or subcontractors,
and terminate them if such action becomes necessary.
C) On some CM-at-Risk contracts, the CM has the option of performing portions of
the work with its own resources (unless prohibited by law on certain public projects).
D) All of the above - ANSWER: D) All of the above
QUESTION COMPLIED FROM REAL EXAM (200 multiple
choice) FULLY SOLVED
A CM's role and responsibilities are governed solely by the Owner/CM Agreement.
True False - ANSWER: True
There are two basic forms of CM, agency and at-risk. Each form provides for the
basic services of construction management practice. However, there are some key
differences. Which of the following do not apply to both CM forms?
A) Both forms provide advice to the owner on constructibility, budget and the
schedule.
B) Both require that the liabilities and risks assumed by the parties be clearly
understood, coordinated, and stated in the respective contracts.
C) Both forms allow the CM to function in an advisory role for the entire engagement
of the CM.
D) Services can vary based on the contractual relationships of the parties and the
risks that are assumed. - ANSWER: C) Both forms allow the CM to function in an
advisory role for the entire engagement of the CM.
Construction management had its beginnings in the early to mid-1960's. Which of
the following factors contributed to the initial use of this delivery system?
A) The need to reduce the overall time and cost associated with project delivery.
B) The increasing cost of money and the unpredictability of project funding streams.
C) The changing role of the general contractor and the increasing numbers of
specialty trade contractors.
D) All of the above. - ANSWER: D) All of the above.
The General Services Administration was the first federal agency to use construction
management. - ANSWER: True
The General Services Administration, the Department of Health, Education and
Welfare (now HHS), and the Veterans Administration ran into similar difficulties in
the use of construction management. Which of the following was/were common
problems for all three agencies?
A) Funding restrictions
B) Claims
C) Change conditions
D) All of the above - ANSWER: D) All of the above
CMAA was formed and incorporated 1982 with its primary focus being the growth
and development of the construction management profession. - ANSWER: True
The CMAA Construction Management Standards of Practice is intended as a guide to
the range of services that constitute professional construction management. They
seek to meet the documented need for definitions of what construction
,management services are, without unduly structuring the methodologies by which
those services are provided by the CM. - ANSWER: True
The goals of the Construction Management Association of America (CMAA) include:
A) Setting standards and developing contract documents for construction
management practice.
B) Expanding the understanding of the construction management concept and its
use in the marketplace.
C) Advocacy for construction management in the legislative, regulatory, and judicial
arenas of federal, state, and local governments.
D) All of the above. - ANSWER: D) All of the above
The fact that an individual is certified or licensed in any other profession does not,
per se, establish him/her as a qualified CM.
True False - ANSWER: True
Certification as a CM means the construction management practitioner has "state of
the art" knowledge and capability to practice construction management.
True False - ANSWER: False
Recruiting and training are business matters and normally do not involve ethical
concerns.
True False - ANSWER: False
Construction management is a concept that is susceptible to overselling.
True False - ANSWER: True
Failure to provide quality services is a business and not an ethical question.
True False - ANSWER: False
Contracting for adequate fees is both a business and an ethical issue.
True False - ANSWER: True
The ethics of the CM profession focus primarily on a CM's relationships in dealing
with its clients.
True False - ANSWER: True
The possible approaches for delivering a project are virtually unlimited. A key reason
for such variations is:
A) The different roles that can be assumed by project participants.
B) Different forms of contracts and methods of compensation that can be used.
C) The different levels of care, responsibility, and risks assumed by the parties
involved.
D) All of the above. - ANSWER: D) All of the above
The traditional delivery system is characterized by executing the major phases of a
project in:
, A) An overlapping concept
B) A linear sequence
C) A fast track method
D) All of the above - ANSWER: B) A linear sequence
A key advantage of the traditional delivery approach is:
A) With the traditional delivery system, the cost of the construction phase is known
before construction starts.
B) Facility features are fully determined & specified.
C) When the construction contract is signed, the major risk belongs to the
contractor.
D) All of the above - ANSWER: B) Facility features are fully determined & specified.
Design-build and at-risk construction management delivery systems allow the option
to fast-track or phase a project.
True False - ANSWER: True
Most definitions of construction management are similar. However, a contractual
definition is not known until:
A) The legal form of the CM contract is chosen.
B) The specific scope of services to be provided is identified.
C) The relationship of the CM to others and the risks and authority assumed by the
parties are clearly defined.
D) All of the above - ANSWER: D) All of the above
21.
In a CM-at-Risk arrangement once construction begins and the CM converts from the
professional advisory role of a CM to the contractual role of a general contractor, the
CM has no implied duties of loyalty and care to the owner.
True False - ANSWER: True
The agency CM does not perform design or actual construction work.
True False - ANSWER: True
Under the CM-at-Risk delivery method, the owner usually must deal with the hybrid
of a construction manager and a general contractor.
True False - ANSWER: True
Under a CM-at-risk contract, which of the following statements are true?
A) The CM, in most cases, holds the trade and/or specialty contracts.
B) The CM has the right to enforce the schedule, pay the trade or subcontractors,
and terminate them if such action becomes necessary.
C) On some CM-at-Risk contracts, the CM has the option of performing portions of
the work with its own resources (unless prohibited by law on certain public projects).
D) All of the above - ANSWER: D) All of the above
