ICC GENERAL REQUIREMENTS EXAM (A NEW UPDATED
VERSION) COMPLETE ACTUAL EXAM QUESTIONS AND
CORRECT VERIFIED ANSWERS (FULL REVISED EXAM) |
GUARANTEED PASS A+
Periodic special inspection requires inspection of _____ percent of all assemblies. -
ANSWER: Rate determined by the Registered Design Professional (RDP)
Special inspection is the inspection of materials and workmanship that ensures
critical _____ design features are incorporated into the construction of a building. -
ANSWER: Structural , Fire , Life Safety
A statement of special inspections must include all of the following: - ANSWER: - type
and extent of each special inspection
- systems requiring special inspection
- identification of the duration of the special inspection
- materials , components , and work required to have special inspections or tests
- type and extent of each test
Continuous special inspection must occur: - ANSWER: During construction of the
components listed in the statement
A statement of the special inspections is required for which of the following
materials? - ANSWER: Anchors installed in hardened concrete , engineered masonry ,
welding
According to the IBC , when must the statement of special inspections be submitted?
- ANSWER: At the same time as the construction documents
A final report on special inspections is submitted to the building department
_____________. - ANSWER: At a time agreed upon prior to the start of work
Who creates the statement of special inspections? - ANSWER: Registered Design
Professional (RDP)
The statement of special inspections lists any components or systems requiring
special inspection. Which of the following situations does not require special
inspection. - ANSWER: The contractor is concerned about a new product's
installation
Each special inspection listed on the statement must identify whether it is ______
special inspection. - ANSWER: Periodic or continuous
For seismic resistance , which of the following is required to be identified in the
statement of special inspections? - ANSWER: Designated seismic systems
, An example of a special case where the building official might require a special
inspection includes all of the following: - ANSWER: - unusual design applications of
materials
- materials required to be installed with additional manufacturer's instructions
containing a requirement for special inspection
- alternative construction materials
Special inspection is inspection of construction requiring h expertise of a(n) ____ to
ensure compliance with the IBC and the approved construction documents. -
ANSWER: Approved special inspector
_____ Special inspection is inspection where the inspector is intermittently present
where the work to be inspected has been or is being preformed - ANSWER: Periodic
In ____ special inspection, the special inspector is required to be present
continuously when and where the work to be inspected being preformed. - ANSWER:
Continuous
A statement of special inspections is required for materials and construction listed in
Section 1705 of the IBC. As an exception, portions of structures designed and
constructed in accordance with _____ do not require special inspection. - ANSWER:
Sections 2211.1.2 and 2308
Where special inspections or tests are required by section 1705, the ____ shall
prepare a statement of special inspections in accordance with Section 1704.3.1 -
ANSWER: Engineer or architect
_____ shall keep records of special inspections and tests. - ANSWER: Approved
special inspection agencies
An approved agency submits reports of special inspections and tests to the ______.
Reports shall indicate that work inspected or tested was or was not completed in
conformance to approved construction documents. - ANSWER: Registered design
professional and building official
Discrepancies shall be brought to the immediate attention of the _______ for
correction. - ANSWER: Contractor
People with duties and responsibilities in the process of special inspection include
the following, except: - ANSWER: Financial institution representatives
Duties of a special inspector include all of the following: - ANSWER: - submitting a
final report
- maintaining familiarity with the approved construction documents
- preforming assigned inspections
VERSION) COMPLETE ACTUAL EXAM QUESTIONS AND
CORRECT VERIFIED ANSWERS (FULL REVISED EXAM) |
GUARANTEED PASS A+
Periodic special inspection requires inspection of _____ percent of all assemblies. -
ANSWER: Rate determined by the Registered Design Professional (RDP)
Special inspection is the inspection of materials and workmanship that ensures
critical _____ design features are incorporated into the construction of a building. -
ANSWER: Structural , Fire , Life Safety
A statement of special inspections must include all of the following: - ANSWER: - type
and extent of each special inspection
- systems requiring special inspection
- identification of the duration of the special inspection
- materials , components , and work required to have special inspections or tests
- type and extent of each test
Continuous special inspection must occur: - ANSWER: During construction of the
components listed in the statement
A statement of the special inspections is required for which of the following
materials? - ANSWER: Anchors installed in hardened concrete , engineered masonry ,
welding
According to the IBC , when must the statement of special inspections be submitted?
- ANSWER: At the same time as the construction documents
A final report on special inspections is submitted to the building department
_____________. - ANSWER: At a time agreed upon prior to the start of work
Who creates the statement of special inspections? - ANSWER: Registered Design
Professional (RDP)
The statement of special inspections lists any components or systems requiring
special inspection. Which of the following situations does not require special
inspection. - ANSWER: The contractor is concerned about a new product's
installation
Each special inspection listed on the statement must identify whether it is ______
special inspection. - ANSWER: Periodic or continuous
For seismic resistance , which of the following is required to be identified in the
statement of special inspections? - ANSWER: Designated seismic systems
, An example of a special case where the building official might require a special
inspection includes all of the following: - ANSWER: - unusual design applications of
materials
- materials required to be installed with additional manufacturer's instructions
containing a requirement for special inspection
- alternative construction materials
Special inspection is inspection of construction requiring h expertise of a(n) ____ to
ensure compliance with the IBC and the approved construction documents. -
ANSWER: Approved special inspector
_____ Special inspection is inspection where the inspector is intermittently present
where the work to be inspected has been or is being preformed - ANSWER: Periodic
In ____ special inspection, the special inspector is required to be present
continuously when and where the work to be inspected being preformed. - ANSWER:
Continuous
A statement of special inspections is required for materials and construction listed in
Section 1705 of the IBC. As an exception, portions of structures designed and
constructed in accordance with _____ do not require special inspection. - ANSWER:
Sections 2211.1.2 and 2308
Where special inspections or tests are required by section 1705, the ____ shall
prepare a statement of special inspections in accordance with Section 1704.3.1 -
ANSWER: Engineer or architect
_____ shall keep records of special inspections and tests. - ANSWER: Approved
special inspection agencies
An approved agency submits reports of special inspections and tests to the ______.
Reports shall indicate that work inspected or tested was or was not completed in
conformance to approved construction documents. - ANSWER: Registered design
professional and building official
Discrepancies shall be brought to the immediate attention of the _______ for
correction. - ANSWER: Contractor
People with duties and responsibilities in the process of special inspection include
the following, except: - ANSWER: Financial institution representatives
Duties of a special inspector include all of the following: - ANSWER: - submitting a
final report
- maintaining familiarity with the approved construction documents
- preforming assigned inspections
