CATEGORY 3 NON-CAB OPERATED CRANE SAFETY EXAM
EXAM AND PRACTICE EXAM NEWEST ACTUAL
EXAM COMPLETE 200 QUESTIONS AND CORRECT
DETAILED ANSWERS (VERIFIED ANSWERS)
|ALREADY GRADED A+
A floating crane with a capacity of 200,000lbs. is a ________________
crane. - CORRECT ANSWER Category 1
What is the category of a jib crane with a capacity of less than 20,000
pounds? - CORRECT ANSWER Category 3
An OET, Bridge crane with a capacity of 80,000lbs. is a ________________
crane. - CORRECT ANSWER Category 2
A commercial truck mounted crane with a capacity of 14,000 lbs. is a
__________ crane. - CORRECT ANSWER category 4
What types of power does a Category 1 or 4 crane generally use and
what is its source? - CORRECT ANSWER Electric or hydraulic
power supplied by a diesel engine
Load - ________ parts are those that restrain position or control the
movement of the load. - CORRECT ANSWER controling
A hook is what type of component? - CORRECT ANSWER Load-
Bearing Part
Hydraulic foot brakes are what type or group of components? -
CORRECT ANSWER Load-Controlling Parts
,Load - _____________ parts are those that support the load. - CORRECT
ANSWER bearing
How is electrical current conveyed from the revolving portion of the
crane to the lower crane structure? - CORRECT ANSWER Through
the collector ring system
Safety devices that provide protection for personnel and equipment
are considered _____________ safety devices. - CORRECT ANSWER
general
Safety devices that affect the safe load lifting and handling
capabilities of equipment are considered __________________ safety
devices. - CORRECT ANSWER operational
Which of the following does not affect the safe operation of the crane?
- CORRECT ANSWER General Safety Devices
A travel alarm is what type or group of components? - CORRECT
ANSWER
A travel alarm is what type or group of components? - CORRECT
ANSWER General Safety Device
During the walk around check you notice a loose bolt on the crane.
You should: - CORRECT ANSWER Notify your supervisor of the
deficiency.
The crane Pre-use Check consists of: - CORRECT ANSWER A walk
around visual check
Performing a "No load" operational
It is the operator's responsibility to report a deficiency to the Crane
Department. - CORRECT ANSWER false
, Deficiencies are required to be reported by the end of the shift. -
CORRECT ANSWER false
If the upper limit switch is working correctly, there is no need to
check the lower limit switch. - CORRECT ANSWER fasle
Part of the no load operational check is to ensure the proper _________
of all controls. - CORRECT ANSWER function
What is the most important reason to do a pre-use check? -
CORRECT ANSWER To make sure the crane is safe to use.
Documented checks are required for which of the following Category 3
cranes? - CORRECT ANSWER gantry
wall
bridge
Place the steps listed in the correct order to check the Upper Limit
Switch on a hoist. - CORRECT ANSWER Raise hoist two feet
below switch & stop
2.Slowly raise hook block into switch
3.Ensure hoist stops with button depressed
There must always be a minimum of _________ full wraps of wire rope on
grooved drums. - CORRECT ANSWER 2
Part of the walk around check is to look for ___________. - CORRECT
ANSWER deficiencies
The minimum number of wraps of wire rope required on non-grooved
drums is __________. - CORRECT ANSWER 3
What is the purpose of a hoist upper limit switch? - CORRECT
ANSWER To prevent "two-blocking" or over-travel of the hook block
EXAM AND PRACTICE EXAM NEWEST ACTUAL
EXAM COMPLETE 200 QUESTIONS AND CORRECT
DETAILED ANSWERS (VERIFIED ANSWERS)
|ALREADY GRADED A+
A floating crane with a capacity of 200,000lbs. is a ________________
crane. - CORRECT ANSWER Category 1
What is the category of a jib crane with a capacity of less than 20,000
pounds? - CORRECT ANSWER Category 3
An OET, Bridge crane with a capacity of 80,000lbs. is a ________________
crane. - CORRECT ANSWER Category 2
A commercial truck mounted crane with a capacity of 14,000 lbs. is a
__________ crane. - CORRECT ANSWER category 4
What types of power does a Category 1 or 4 crane generally use and
what is its source? - CORRECT ANSWER Electric or hydraulic
power supplied by a diesel engine
Load - ________ parts are those that restrain position or control the
movement of the load. - CORRECT ANSWER controling
A hook is what type of component? - CORRECT ANSWER Load-
Bearing Part
Hydraulic foot brakes are what type or group of components? -
CORRECT ANSWER Load-Controlling Parts
,Load - _____________ parts are those that support the load. - CORRECT
ANSWER bearing
How is electrical current conveyed from the revolving portion of the
crane to the lower crane structure? - CORRECT ANSWER Through
the collector ring system
Safety devices that provide protection for personnel and equipment
are considered _____________ safety devices. - CORRECT ANSWER
general
Safety devices that affect the safe load lifting and handling
capabilities of equipment are considered __________________ safety
devices. - CORRECT ANSWER operational
Which of the following does not affect the safe operation of the crane?
- CORRECT ANSWER General Safety Devices
A travel alarm is what type or group of components? - CORRECT
ANSWER
A travel alarm is what type or group of components? - CORRECT
ANSWER General Safety Device
During the walk around check you notice a loose bolt on the crane.
You should: - CORRECT ANSWER Notify your supervisor of the
deficiency.
The crane Pre-use Check consists of: - CORRECT ANSWER A walk
around visual check
Performing a "No load" operational
It is the operator's responsibility to report a deficiency to the Crane
Department. - CORRECT ANSWER false
, Deficiencies are required to be reported by the end of the shift. -
CORRECT ANSWER false
If the upper limit switch is working correctly, there is no need to
check the lower limit switch. - CORRECT ANSWER fasle
Part of the no load operational check is to ensure the proper _________
of all controls. - CORRECT ANSWER function
What is the most important reason to do a pre-use check? -
CORRECT ANSWER To make sure the crane is safe to use.
Documented checks are required for which of the following Category 3
cranes? - CORRECT ANSWER gantry
wall
bridge
Place the steps listed in the correct order to check the Upper Limit
Switch on a hoist. - CORRECT ANSWER Raise hoist two feet
below switch & stop
2.Slowly raise hook block into switch
3.Ensure hoist stops with button depressed
There must always be a minimum of _________ full wraps of wire rope on
grooved drums. - CORRECT ANSWER 2
Part of the walk around check is to look for ___________. - CORRECT
ANSWER deficiencies
The minimum number of wraps of wire rope required on non-grooved
drums is __________. - CORRECT ANSWER 3
What is the purpose of a hoist upper limit switch? - CORRECT
ANSWER To prevent "two-blocking" or over-travel of the hook block
