NCCER Module 4 Intro to power tools
A saw that has a thin one-piece blade that runs around guides, that runs around either end
of the saw is a - -Band saw
A power miter saw combines a miter box with a - -Circular saw
An angle grinder is used to grind - -Hard heavy materials
The adjustable tool rest on a bench grinder should be positioned - -One eighth of an
inch from the grinding tool
A good way to check the condition of the grinding wheel on a bench grinder is to - -
Perform a ring test
A grinder can catch on rough material edges and shift around, especially when using rotary
bits called - -Burr bits
When using power tools never engage the - -Trigger locks
Before replacing parts such as bits, blades, or discs on any tool, you must - -
Disconnect the power source
Most hammer drills will not hammer until - -Pressure is applied to the drill bit
A pneumatic drill is commonly used when - -There is no electricity
Never use a circular saw that does not have a blade guard because - -The guard
protects you from touching the blade.
When using a circular saw be sure to - -Cut on the waist side of the cut mark to allow
for the blades kerf.
Saws with fine blades that are excellent for delicate and intricate cutting are called -
-Saber saws
A Porta-Power is an example of a - -Hydraulic tool
A power tool that is a well suited for breaking up concrete during demolition work is a -
-Pavement breaker
If a pneumatic nailer is not firing properly before attempting repairs be sure to - -
Disconnect the air hose
Before using a pneumatically powered nailer for the first time, it is important to - -
Read the manufacturer's instructions
Special training is required before using any kind of - -Power actuated fastening tool
A saw that has a thin one-piece blade that runs around guides, that runs around either end
of the saw is a - -Band saw
A power miter saw combines a miter box with a - -Circular saw
An angle grinder is used to grind - -Hard heavy materials
The adjustable tool rest on a bench grinder should be positioned - -One eighth of an
inch from the grinding tool
A good way to check the condition of the grinding wheel on a bench grinder is to - -
Perform a ring test
A grinder can catch on rough material edges and shift around, especially when using rotary
bits called - -Burr bits
When using power tools never engage the - -Trigger locks
Before replacing parts such as bits, blades, or discs on any tool, you must - -
Disconnect the power source
Most hammer drills will not hammer until - -Pressure is applied to the drill bit
A pneumatic drill is commonly used when - -There is no electricity
Never use a circular saw that does not have a blade guard because - -The guard
protects you from touching the blade.
When using a circular saw be sure to - -Cut on the waist side of the cut mark to allow
for the blades kerf.
Saws with fine blades that are excellent for delicate and intricate cutting are called -
-Saber saws
A Porta-Power is an example of a - -Hydraulic tool
A power tool that is a well suited for breaking up concrete during demolition work is a -
-Pavement breaker
If a pneumatic nailer is not firing properly before attempting repairs be sure to - -
Disconnect the air hose
Before using a pneumatically powered nailer for the first time, it is important to - -
Read the manufacturer's instructions
Special training is required before using any kind of - -Power actuated fastening tool
