IMSA / Traffic Signal Technician Level I & II (Latest
2024/ 2025 Updates STUDY BUNDLE WITH COMPLETE
SOLUTIONS) Questions and Verified Answers| Grade
A| 100% Correct
The work zone starts at the first advance warning sign; therefore, where should the
flagger stand when directing traffic in a TTC zone? - ANSWEROn the shoulder
adjacent to traffic being controlled
How many orange and black TTC signs should there be in each direction on a 2-way,
2-lane rural roadway? - ANSWERthree
What should the sign spacing be on a two-lane, two-way rural highway? -
ANSWER500 ft.
How many feet apart should the advanced warning signs be on a high speed urban
roadway? - ANSWER350 ft
For additional emphasis on a high speed urban roadway, signs may be posted:
_________ - ANSWERon the left hand side of the highway
Taper length refers to: - ANSWERThe distance required to safely route traffic from
one lane to another
taper length is based on: - ANSWERspeed and width of lane closed
in a taper, the maximum distance between channelizing devices should be: -
ANSWERequal in feet to the speed limit
on a barricade, if the stripes start at the upper right side and angle down to the
lower left side: ________ - ANSWERtraffic should pass to the left
at night and/or on high speed roads greater than 45 mph, cones shall be:
__________ - ANSWERat least 28" tall and retroreflectorized with at least two white
bands and two orange bands
one a rural two-lane road, where would you place the flagger in respect to the
beginning of the taper for a closed lane? - ANSWERat the beginning of the taper
What are some factors that should be considered in formulating a TTC plan? -
ANSWER1) Type of work to be done
2) traffic volume
3) traffic speed
4) school bus routes
, the rerouting of traffic onto a temporary bypass road is known as a: __________ -
ANSWERdiversion
pavement markings no longer needed should be: - ANSWERremoved by grinding
a TTC zone should be checked: - ANSWERroutinely
in the MUTCD a mandatory condition is a: - ANSWERStandard Statement
in the mutcd an option is: - ANSWERa statement of a permissive condition
A TTC plan is a: - ANSWERtemporary traffic control plan
A TTC plan should include: - ANSWERtypical application drawings
The MUTCD states that individuals responsible for the implementation of TTC
measures should: - ANSWERbe trained and/or certified
TTC principles and procedures should include: - ANSWER1) traffic safety, movement,
and guidance
2) TTC zone inspection
3) TTC zone maintenance
work zones should be inspected: - ANSWERduring both day and night
a recommended practice in the MUTCD is a _______ - ANSWERguidance statement
a permissive condition in the MUTCD is an ________ - ANSWERoption statement
a _____ in legal terminology is *Civil Wrong* other than a beach of contract for
which a court will provide a remedy - ANSWERtort
*Liability* for a tort means the ____________ to pay monetary damages to the
person injured or damaged - ANSWERlegal obligation
Negligence can be defined as: - ANSWER1) the failure to do something that
reasonable person would ordinarily do
2) the doing of something that an ordinary person would not ordinarily do
3) the failure to use ordinary care
the obligation for a person to conform to a certain standard of conduct is the
definition of: - ANSWERduty
the MUTCD is an example of: - ANSWERaccepted standards and guidelines
a red light is out. It is reported by the police to the traffic engineering dept. This is an
example of: - ANSWERnotice
2024/ 2025 Updates STUDY BUNDLE WITH COMPLETE
SOLUTIONS) Questions and Verified Answers| Grade
A| 100% Correct
The work zone starts at the first advance warning sign; therefore, where should the
flagger stand when directing traffic in a TTC zone? - ANSWEROn the shoulder
adjacent to traffic being controlled
How many orange and black TTC signs should there be in each direction on a 2-way,
2-lane rural roadway? - ANSWERthree
What should the sign spacing be on a two-lane, two-way rural highway? -
ANSWER500 ft.
How many feet apart should the advanced warning signs be on a high speed urban
roadway? - ANSWER350 ft
For additional emphasis on a high speed urban roadway, signs may be posted:
_________ - ANSWERon the left hand side of the highway
Taper length refers to: - ANSWERThe distance required to safely route traffic from
one lane to another
taper length is based on: - ANSWERspeed and width of lane closed
in a taper, the maximum distance between channelizing devices should be: -
ANSWERequal in feet to the speed limit
on a barricade, if the stripes start at the upper right side and angle down to the
lower left side: ________ - ANSWERtraffic should pass to the left
at night and/or on high speed roads greater than 45 mph, cones shall be:
__________ - ANSWERat least 28" tall and retroreflectorized with at least two white
bands and two orange bands
one a rural two-lane road, where would you place the flagger in respect to the
beginning of the taper for a closed lane? - ANSWERat the beginning of the taper
What are some factors that should be considered in formulating a TTC plan? -
ANSWER1) Type of work to be done
2) traffic volume
3) traffic speed
4) school bus routes
, the rerouting of traffic onto a temporary bypass road is known as a: __________ -
ANSWERdiversion
pavement markings no longer needed should be: - ANSWERremoved by grinding
a TTC zone should be checked: - ANSWERroutinely
in the MUTCD a mandatory condition is a: - ANSWERStandard Statement
in the mutcd an option is: - ANSWERa statement of a permissive condition
A TTC plan is a: - ANSWERtemporary traffic control plan
A TTC plan should include: - ANSWERtypical application drawings
The MUTCD states that individuals responsible for the implementation of TTC
measures should: - ANSWERbe trained and/or certified
TTC principles and procedures should include: - ANSWER1) traffic safety, movement,
and guidance
2) TTC zone inspection
3) TTC zone maintenance
work zones should be inspected: - ANSWERduring both day and night
a recommended practice in the MUTCD is a _______ - ANSWERguidance statement
a permissive condition in the MUTCD is an ________ - ANSWERoption statement
a _____ in legal terminology is *Civil Wrong* other than a beach of contract for
which a court will provide a remedy - ANSWERtort
*Liability* for a tort means the ____________ to pay monetary damages to the
person injured or damaged - ANSWERlegal obligation
Negligence can be defined as: - ANSWER1) the failure to do something that
reasonable person would ordinarily do
2) the doing of something that an ordinary person would not ordinarily do
3) the failure to use ordinary care
the obligation for a person to conform to a certain standard of conduct is the
definition of: - ANSWERduty
the MUTCD is an example of: - ANSWERaccepted standards and guidelines
a red light is out. It is reported by the police to the traffic engineering dept. This is an
example of: - ANSWERnotice
