NICET Level 2 Fire Alarms (Latest 2024/ 2025 Updates
STUDY BUNDLE PACKAGE WITH SOLUTIONS) Qs & As|
100% Correct| Grade A (Verified Answers)
3.3.8 What is an Addressable Device? - ANSWERIt is a fire alarm system component
that possesses discreet identification.
__________ Detector has a piping distribution network to the areas being protected.
Air Sampling-Type detector uses a fan inside its housing to draw air. -
ANSWER3.3.66.1 Air sampling-type
An _________
that transmits a signal indicating varying degrees of condition - ANSWER3.3.132.1
Analog Initiating Device
A __________ can transmit a signal that indicates on off condition only. -
ANSWER3.3.132.1 Conventional Initiating Device
__________ is a feature that can reduce unwanted alarms. - ANSWER3.3.16 Alarm
verification
Fire alarms from an auxiliary system are always received at: - ANSWERFire alarms
from an auxiliary system are always received at the public fire service
communication center.
Auxiliary Fire Alarm System is connected to: - ANSWERAuxiliary Fire Alarm System is
connected to a municipal fire alarm system.
Municipal fire alarm system - ANSWERA public emergency alarm reporting system
Auxiliary Fire Alarm System - ANSWERA protected premises fire alarm system or
other emergency system at the protected premises and the system used to
connected the protected premises system to a public emergency alarm reporting
system for transmitting an alarm to the communications center.
You need to request NFPA to certify your installations. True? - ANSWERNot true. The
NFPA does not certify any installations. AHJ is responsible for approving installations.
An AHJ is responsible for: - ANSWERAn Authority Having Jurisdiction is responsible
for approving an installation.
What is an Annunciator? - ANSWERAn Annunciator has multiple indicator lamps,
alphanumeric displays... etc... to show status information of a circuits condition.
, A __________ Fire Alarm Box requires that you break a special element so to gain
access to and operate the box. - ANSWERA Breakglass Fire Alarm Box requires that
you break a special element so to gain access to and operate the box.
What does Compatibility Listed mean? - ANSWERCompatibility Listed is a specific
listing process that applies to TWO WIRE DEVICES only.
Combination Detector - ANSWERCombination Detector can respond to multiple fire
phenomenon.
Equipment is LISTED - ANSWERThe equipment is included in a list publish by an
organization which is acceptable to the "AHJ"
With a "non-restorable" initiating device: - ANSWERthe sensing element will be
DESTROYED during the process of operation
What is a pull station? - ANSWERPULL STATION is a manually operated device which
may be used to initiate an alarm signal.
Describe NRTL: - ANSWERIt is the Nationally Recognized Testing Laboratory that is
recognized by the OSHA as meeting the qualifications specified in the Code of
Federal Regulations.
CODE - ANSWERCode are written rules that are adopted as law.
What give the details on how the requirement of the code may be achieved? -
ANSWERSTANDARDS give the details on how the requirement of the code may be
achieved.
NFPA 72 recommends that the coverage area for a single zone should not exceed
__________ square feet. - ANSWER20,000 square feet
NFPA 72 recommends that the coverage area for a single zone should not extend
beyond a floor of a building. - ANSWERTRUE
At the max you can have _____ waterflow switches and _____ supervisory switches
connected to a single zone. - ANSWERAt the max you can have 5 waterflow switches
and 20 supervisory switches connected to a single zone.
When you place smoke and heat detector on a peaked ceiling, you should measure
_____ feet horizontally from the peak in both directions. - ANSWERWhen you place
smoke and heat detector on a peaked ceiling, you should measure 3 feet horizontally
from the peak in both directions.
When you install smoke detectors under raised floors: - ANSWERthe detectors
SHOULD be mounted in an orientation in which they are listed.
STUDY BUNDLE PACKAGE WITH SOLUTIONS) Qs & As|
100% Correct| Grade A (Verified Answers)
3.3.8 What is an Addressable Device? - ANSWERIt is a fire alarm system component
that possesses discreet identification.
__________ Detector has a piping distribution network to the areas being protected.
Air Sampling-Type detector uses a fan inside its housing to draw air. -
ANSWER3.3.66.1 Air sampling-type
An _________
that transmits a signal indicating varying degrees of condition - ANSWER3.3.132.1
Analog Initiating Device
A __________ can transmit a signal that indicates on off condition only. -
ANSWER3.3.132.1 Conventional Initiating Device
__________ is a feature that can reduce unwanted alarms. - ANSWER3.3.16 Alarm
verification
Fire alarms from an auxiliary system are always received at: - ANSWERFire alarms
from an auxiliary system are always received at the public fire service
communication center.
Auxiliary Fire Alarm System is connected to: - ANSWERAuxiliary Fire Alarm System is
connected to a municipal fire alarm system.
Municipal fire alarm system - ANSWERA public emergency alarm reporting system
Auxiliary Fire Alarm System - ANSWERA protected premises fire alarm system or
other emergency system at the protected premises and the system used to
connected the protected premises system to a public emergency alarm reporting
system for transmitting an alarm to the communications center.
You need to request NFPA to certify your installations. True? - ANSWERNot true. The
NFPA does not certify any installations. AHJ is responsible for approving installations.
An AHJ is responsible for: - ANSWERAn Authority Having Jurisdiction is responsible
for approving an installation.
What is an Annunciator? - ANSWERAn Annunciator has multiple indicator lamps,
alphanumeric displays... etc... to show status information of a circuits condition.
, A __________ Fire Alarm Box requires that you break a special element so to gain
access to and operate the box. - ANSWERA Breakglass Fire Alarm Box requires that
you break a special element so to gain access to and operate the box.
What does Compatibility Listed mean? - ANSWERCompatibility Listed is a specific
listing process that applies to TWO WIRE DEVICES only.
Combination Detector - ANSWERCombination Detector can respond to multiple fire
phenomenon.
Equipment is LISTED - ANSWERThe equipment is included in a list publish by an
organization which is acceptable to the "AHJ"
With a "non-restorable" initiating device: - ANSWERthe sensing element will be
DESTROYED during the process of operation
What is a pull station? - ANSWERPULL STATION is a manually operated device which
may be used to initiate an alarm signal.
Describe NRTL: - ANSWERIt is the Nationally Recognized Testing Laboratory that is
recognized by the OSHA as meeting the qualifications specified in the Code of
Federal Regulations.
CODE - ANSWERCode are written rules that are adopted as law.
What give the details on how the requirement of the code may be achieved? -
ANSWERSTANDARDS give the details on how the requirement of the code may be
achieved.
NFPA 72 recommends that the coverage area for a single zone should not exceed
__________ square feet. - ANSWER20,000 square feet
NFPA 72 recommends that the coverage area for a single zone should not extend
beyond a floor of a building. - ANSWERTRUE
At the max you can have _____ waterflow switches and _____ supervisory switches
connected to a single zone. - ANSWERAt the max you can have 5 waterflow switches
and 20 supervisory switches connected to a single zone.
When you place smoke and heat detector on a peaked ceiling, you should measure
_____ feet horizontally from the peak in both directions. - ANSWERWhen you place
smoke and heat detector on a peaked ceiling, you should measure 3 feet horizontally
from the peak in both directions.
When you install smoke detectors under raised floors: - ANSWERthe detectors
SHOULD be mounted in an orientation in which they are listed.
