OSHA 30 Final Exam Review
Hand tools are powered instruments, which can be very hazardous when improperly
used due to their power source. - answer False
Which of the following is not a correct general precaution that should be followed by all
power tool users? - answer Handle tools by the cord or hose
Safety guards must never be removed when a tool is being used. - answer True
What is the main danger associated with pneumatic tools? - answer Getting hit by tool's
attachment or fastener
The operating control on hand-held power tools must be located at to minimize the
possibility of accidental operation, if such accidental operation would constitute a hazard
to employees. - answer True
What requirements are necessary to protect an electric tool user from shock? - answer
Both A and B
All portable, power-driven circular saws having a blade diameter greater than 3 in. must
be equipped with guards above and below the base plate or shoe - answerFalse
An important safety precaution to remember when operating powder-actuated tool is: -
answerInspect it before use and determine that it is clean and that all moving parts
operate freely
Hydraulic jacks exposed to freezing temperatures must be kept warm with an internal
temperature lift. - answerFalse
Who is responsible for the safe conditions of tools and equipment used in the
workplace? - answerEmployers
What does MSD stand for? - answermusculoskeletal disorders
You should change your working position frequently by: - answerAll of the above
regardless of how good your working posture is, working in the same posture or sitting
for prolonged periods is not healthy. - answerTrue
Hazard prevention and control includes - answerImplementing administrative and
engineering controls
, Pushing carries a greater risk of strain and injury. - answerFalse
Uncontrollable shivering, loss of coordination, and slurred speech are symptoms of
what? - answerHypothermia
Types of heat illness include? - answerAll of the above
Implementing an ergonomic process is effective in reducing the risk of developing
MSDs in high-risk industries. - answerTrue
When does Working Restriction Protection end? - answerThe employee is able to return
to his or her regular job or a new position.
Reporting symptoms of MSD early does not help in stopping MSD. - answerFalse
Industrial hygiene is the science of keeping yourself favorable to health, free from dirt,
bacteria. - answerFalse
Gases are formless fluids that expand to occupy the space or enclosure the are
contained in. - answerTrue
Biological hazards are - answerViruses
Which of the following is NOT a role of industrial hygienists? - answerTraining
employees on the recognition of hazards
Noise can be reduced by: - answerAll of the above
Engineering controls are the last strategy of control an employer should use for job
hazards. - answerFalse
Effective personal protective equipment must be? - answerRegularly maintained
Employees who wear personal protective equipment do not need safety and health
training. - answerFalse
During emergencies, hazards appear that normally are not found in the workplace. -
answerTrue
Work practice controls include the company's general workplace rules and other
operation-specific rules. - answerTrue
Which of the following is not a responsibility of a fire watch? - answerComplete tasks
not related to fire watch duty in the work areas
Hand tools are powered instruments, which can be very hazardous when improperly
used due to their power source. - answer False
Which of the following is not a correct general precaution that should be followed by all
power tool users? - answer Handle tools by the cord or hose
Safety guards must never be removed when a tool is being used. - answer True
What is the main danger associated with pneumatic tools? - answer Getting hit by tool's
attachment or fastener
The operating control on hand-held power tools must be located at to minimize the
possibility of accidental operation, if such accidental operation would constitute a hazard
to employees. - answer True
What requirements are necessary to protect an electric tool user from shock? - answer
Both A and B
All portable, power-driven circular saws having a blade diameter greater than 3 in. must
be equipped with guards above and below the base plate or shoe - answerFalse
An important safety precaution to remember when operating powder-actuated tool is: -
answerInspect it before use and determine that it is clean and that all moving parts
operate freely
Hydraulic jacks exposed to freezing temperatures must be kept warm with an internal
temperature lift. - answerFalse
Who is responsible for the safe conditions of tools and equipment used in the
workplace? - answerEmployers
What does MSD stand for? - answermusculoskeletal disorders
You should change your working position frequently by: - answerAll of the above
regardless of how good your working posture is, working in the same posture or sitting
for prolonged periods is not healthy. - answerTrue
Hazard prevention and control includes - answerImplementing administrative and
engineering controls
, Pushing carries a greater risk of strain and injury. - answerFalse
Uncontrollable shivering, loss of coordination, and slurred speech are symptoms of
what? - answerHypothermia
Types of heat illness include? - answerAll of the above
Implementing an ergonomic process is effective in reducing the risk of developing
MSDs in high-risk industries. - answerTrue
When does Working Restriction Protection end? - answerThe employee is able to return
to his or her regular job or a new position.
Reporting symptoms of MSD early does not help in stopping MSD. - answerFalse
Industrial hygiene is the science of keeping yourself favorable to health, free from dirt,
bacteria. - answerFalse
Gases are formless fluids that expand to occupy the space or enclosure the are
contained in. - answerTrue
Biological hazards are - answerViruses
Which of the following is NOT a role of industrial hygienists? - answerTraining
employees on the recognition of hazards
Noise can be reduced by: - answerAll of the above
Engineering controls are the last strategy of control an employer should use for job
hazards. - answerFalse
Effective personal protective equipment must be? - answerRegularly maintained
Employees who wear personal protective equipment do not need safety and health
training. - answerFalse
During emergencies, hazards appear that normally are not found in the workplace. -
answerTrue
Work practice controls include the company's general workplace rules and other
operation-specific rules. - answerTrue
Which of the following is not a responsibility of a fire watch? - answerComplete tasks
not related to fire watch duty in the work areas
