OSHA 30 Module 7 Material Handling
Which one of these workers has the LEAST risk of suffering a hand injury? - answer
Larry is giving hand signals to a forklift driver who cannot see over her load
Modifications to power-operated industrial trucks may be made only with express
approval from the ______________ - answer Manufacturer
Which of the following designation of approved power operated industrial trucks can be
used in atmospheres in which combustible dust is? – answer EX
The tire restraining device or barrier shall be removed immediately from service for any
of these defects EXCEPT - answer Discoloration
Before putting them back into operation, a complete inspection is required for derricks
that have been idle for more than - answer6 months
Passageways and aisles around stored materials must be left clear - answer to reduce
the number of potential hazards to employees
How many feet from a helicopter's lifting/depositing area must loose gear and other
objects be removed? - answer100 feet
Multi-piece wheel components may only be interchanged if recommended by -
answerThe rim manual
Which of the following is NOT a designation for industrial powered trucks? - answerDP
Slings or wire ropes must be taken out of service if they have ___________ broken
wires in one strand in one lay. - answerFive
The minimum clearance between the wires and any part of the crane or load should be
________ for lines rated 50KV or below. - answer10 feet
The minimum clearance between the wires and any part of a crane or load should
be__________ in transit with no load and boom lowered. - answer4 feet
Metal mesh slings must be removed from service if an employee notices a reduction in
wire diameter of ___________ due to abrasion. - answer25%
Metal mesh slings must be removed from service if an employee notices a reduction in
wire diameter of ___________ due to corrosion. - answer15%
Which one of these workers has the LEAST risk of suffering a hand injury? - answer
Larry is giving hand signals to a forklift driver who cannot see over her load
Modifications to power-operated industrial trucks may be made only with express
approval from the ______________ - answer Manufacturer
Which of the following designation of approved power operated industrial trucks can be
used in atmospheres in which combustible dust is? – answer EX
The tire restraining device or barrier shall be removed immediately from service for any
of these defects EXCEPT - answer Discoloration
Before putting them back into operation, a complete inspection is required for derricks
that have been idle for more than - answer6 months
Passageways and aisles around stored materials must be left clear - answer to reduce
the number of potential hazards to employees
How many feet from a helicopter's lifting/depositing area must loose gear and other
objects be removed? - answer100 feet
Multi-piece wheel components may only be interchanged if recommended by -
answerThe rim manual
Which of the following is NOT a designation for industrial powered trucks? - answerDP
Slings or wire ropes must be taken out of service if they have ___________ broken
wires in one strand in one lay. - answerFive
The minimum clearance between the wires and any part of the crane or load should be
________ for lines rated 50KV or below. - answer10 feet
The minimum clearance between the wires and any part of a crane or load should
be__________ in transit with no load and boom lowered. - answer4 feet
Metal mesh slings must be removed from service if an employee notices a reduction in
wire diameter of ___________ due to abrasion. - answer25%
Metal mesh slings must be removed from service if an employee notices a reduction in
wire diameter of ___________ due to corrosion. - answer15%
