Complete; Epic Training COG170 Cogito Fundamentals|
COG170 Cogito Fundamentals| Cogito Fundamentals
COG170| Cogito Fundamentals Questions With Verified
Answers/ Guarantee
Radar dashboards - ANSWERare often the first thing users see when they log into
Epic every day. Dashboards are the hub of reporting and analytics in Epic, and
consolidate data from all corners of your healthcare system. I
Chart Search. - ANSWERThe easiest way to access an activity in Hyperspace
Analytics Catalog - ANSWERis a central repository of all reporting content.
A component - ANSWERis a single graph or table or other piece of functionality that
your users will interact with on the dashboard. Components are the building blocks
of a dashboard, and are the primary way you will add new content or remove
content from a dashboard.
guiding principles when creating or editing Radar content: - ANSWER-Any dashboard
available to a user must work
-Each component on a dashboard must work
-All dashboards should have a defined target audience -Each user in that audience
must have the security to use every component on the dashboard
The Dashboard Editor has up to six forms that control the dashboard's content and
its metadata: - ANSWER-Basic Information
-Layout
-Content
-Resource Settings
-Parameters
-Access
T/F The Dashboard Editor can be used to view the settings of any dashboard in your
system, but only custom‐built dashboards can be modified. Epic‐released
dashboards will be read‐ only. - ANSWERTrue
Basic Information - ANSWERThe Basic Information form records the purpose,
ownership, and general information of a dashboard.
Display title - ANSWEREnd users see the display title in the Analytics Catalog and
when they view a dashboard.
Description - ANSWEREnd users may read this description about the dashboard in
the Analytics Catalog.
,Owning application - ANSWERThe application responsible for maintaining this
dashboard.
Layout - ANSWERThe Layout form controls the number and position of regions that
present the components in your dashboard.
T/F End users cannot see your dashboard from the Analytics Catalog until you select
both the Ready for use and Enabled for user selection checkboxes. - ANSWERTrue
There are seven types of component records available in Radar. They are: - ANSWER-
Graph
-Link
-Message Board
-Native HTML Report
-Listing Table
-Tranche ﴾This type is not currently used﴿
T/F For easier management of your component list, press F4 to insert a blank line in
your table
of components. To remove a line, select the line and press SHIFT+F4. This tip works
in many
other tables in Hyperspace.
To move a selected component higher or lower in the component list, use the up
and down
arrows to the right of the component. - ANSWERTrue
The Access form controls the set of users that can access this dashboard and lists the
dashboard's type﴾s﴿. This form also records whether the dashboard is ready for use.
This check box must be selected before any end user can use it. - ANSWERAccess
This must be selected for any user, even the dashboard builder, to open and view
the dashboard. In addition, all components on a dashboard must be marked as
Ready for use before the dashboard can be marked as Ready for use. -
ANSWERReady for use
Select this when you want the dashboard to be available in the Analytics Catalog. -
ANSWEREnabled for user
selection
T/F End users cannot see your dashboard from the Analytics Catalog until you select
both the Ready for use and Enabled for user selection checkboxes. - ANSWERTrue
1. Save your settings in the Dashboard Editor
The easiest way to save your settings is to navigate to another form in the
Dashboard Editor.
Settings are also saved when you click Accept to close the Dashboard
Editor, but doing so means it will take longer to return to this record if you
, wish to make further edits.
2. Hard refresh your dashboard.
While viewing your dashboard, use the keyboard shortcut of ALT + = ﴾Mac
users: Option + Command + =﴿. - ANSWERTo view a dashboard as you are making
changes to it, you will need to:
The Analytics Catalog can be used to find which of the following reporting resource?
a) Workbench reports, b) saved SlicerDicer sessions, c) Radar dashboards, d)
Dashboard components, e) Workbench templates, f) Epic-Crystal reports. -
ANSWERa) Workbench reports, c) Radar dashboards, d)Dashboard components, f)
Epic-Crystal reports
Assuming a user has the appropriate report group to access a dashboard, what other
dashboard settings control whether the dashboard is available for viewing? -
ANSWERAppropriate Report Group; The Ready for use and Enabled for user
selection check boxes
Every Report model is a record in which Master File? - ANSWERHSQ
Which of the following do you need to create a link from a dashboard to a given
Hyperspaceactivity?
a. The activity descriptor for the activity
b. The menu descriptor of the activity
c. The user-facing name of the activity
d. The parent menu of the activity record - ANSWERThe activity descriptor for the
activity
You have built a component record. Which of the following could explain why the
component does not appear on a specific dashboard?
a. The component is not set as ready for use
b. The component is not listed on the Content form of the dashboard
c. The component and the dashboard do not share any report groups
d. The component has not been marked as enabled for user selection - ANSWERa.
The component is not set as ready for use
b. The component is not listed on the Content form of the dashboard
True or False. Components require a defined Display title on the Display form. -
ANSWERTrue - It is a required field
A scheduler wants a population that shows how many appointments there are today
with a status of 'Scheduled.' They want to reference this throughout the day to keep
track of how many appointments are left to check in. Could this be done in
SlicerDicer? Why? - ANSWERNo, SlicerDicer does not contain today's data, so a list of
scheduled appointments wouldn't change throughout the day.
A user wants a list of surgical cases scheduled in the next week grouped by
procedure. They will reference this list at the start of each week to audit room and
COG170 Cogito Fundamentals| Cogito Fundamentals
COG170| Cogito Fundamentals Questions With Verified
Answers/ Guarantee
Radar dashboards - ANSWERare often the first thing users see when they log into
Epic every day. Dashboards are the hub of reporting and analytics in Epic, and
consolidate data from all corners of your healthcare system. I
Chart Search. - ANSWERThe easiest way to access an activity in Hyperspace
Analytics Catalog - ANSWERis a central repository of all reporting content.
A component - ANSWERis a single graph or table or other piece of functionality that
your users will interact with on the dashboard. Components are the building blocks
of a dashboard, and are the primary way you will add new content or remove
content from a dashboard.
guiding principles when creating or editing Radar content: - ANSWER-Any dashboard
available to a user must work
-Each component on a dashboard must work
-All dashboards should have a defined target audience -Each user in that audience
must have the security to use every component on the dashboard
The Dashboard Editor has up to six forms that control the dashboard's content and
its metadata: - ANSWER-Basic Information
-Layout
-Content
-Resource Settings
-Parameters
-Access
T/F The Dashboard Editor can be used to view the settings of any dashboard in your
system, but only custom‐built dashboards can be modified. Epic‐released
dashboards will be read‐ only. - ANSWERTrue
Basic Information - ANSWERThe Basic Information form records the purpose,
ownership, and general information of a dashboard.
Display title - ANSWEREnd users see the display title in the Analytics Catalog and
when they view a dashboard.
Description - ANSWEREnd users may read this description about the dashboard in
the Analytics Catalog.
,Owning application - ANSWERThe application responsible for maintaining this
dashboard.
Layout - ANSWERThe Layout form controls the number and position of regions that
present the components in your dashboard.
T/F End users cannot see your dashboard from the Analytics Catalog until you select
both the Ready for use and Enabled for user selection checkboxes. - ANSWERTrue
There are seven types of component records available in Radar. They are: - ANSWER-
Graph
-Link
-Message Board
-Native HTML Report
-Listing Table
-Tranche ﴾This type is not currently used﴿
T/F For easier management of your component list, press F4 to insert a blank line in
your table
of components. To remove a line, select the line and press SHIFT+F4. This tip works
in many
other tables in Hyperspace.
To move a selected component higher or lower in the component list, use the up
and down
arrows to the right of the component. - ANSWERTrue
The Access form controls the set of users that can access this dashboard and lists the
dashboard's type﴾s﴿. This form also records whether the dashboard is ready for use.
This check box must be selected before any end user can use it. - ANSWERAccess
This must be selected for any user, even the dashboard builder, to open and view
the dashboard. In addition, all components on a dashboard must be marked as
Ready for use before the dashboard can be marked as Ready for use. -
ANSWERReady for use
Select this when you want the dashboard to be available in the Analytics Catalog. -
ANSWEREnabled for user
selection
T/F End users cannot see your dashboard from the Analytics Catalog until you select
both the Ready for use and Enabled for user selection checkboxes. - ANSWERTrue
1. Save your settings in the Dashboard Editor
The easiest way to save your settings is to navigate to another form in the
Dashboard Editor.
Settings are also saved when you click Accept to close the Dashboard
Editor, but doing so means it will take longer to return to this record if you
, wish to make further edits.
2. Hard refresh your dashboard.
While viewing your dashboard, use the keyboard shortcut of ALT + = ﴾Mac
users: Option + Command + =﴿. - ANSWERTo view a dashboard as you are making
changes to it, you will need to:
The Analytics Catalog can be used to find which of the following reporting resource?
a) Workbench reports, b) saved SlicerDicer sessions, c) Radar dashboards, d)
Dashboard components, e) Workbench templates, f) Epic-Crystal reports. -
ANSWERa) Workbench reports, c) Radar dashboards, d)Dashboard components, f)
Epic-Crystal reports
Assuming a user has the appropriate report group to access a dashboard, what other
dashboard settings control whether the dashboard is available for viewing? -
ANSWERAppropriate Report Group; The Ready for use and Enabled for user
selection check boxes
Every Report model is a record in which Master File? - ANSWERHSQ
Which of the following do you need to create a link from a dashboard to a given
Hyperspaceactivity?
a. The activity descriptor for the activity
b. The menu descriptor of the activity
c. The user-facing name of the activity
d. The parent menu of the activity record - ANSWERThe activity descriptor for the
activity
You have built a component record. Which of the following could explain why the
component does not appear on a specific dashboard?
a. The component is not set as ready for use
b. The component is not listed on the Content form of the dashboard
c. The component and the dashboard do not share any report groups
d. The component has not been marked as enabled for user selection - ANSWERa.
The component is not set as ready for use
b. The component is not listed on the Content form of the dashboard
True or False. Components require a defined Display title on the Display form. -
ANSWERTrue - It is a required field
A scheduler wants a population that shows how many appointments there are today
with a status of 'Scheduled.' They want to reference this throughout the day to keep
track of how many appointments are left to check in. Could this be done in
SlicerDicer? Why? - ANSWERNo, SlicerDicer does not contain today's data, so a list of
scheduled appointments wouldn't change throughout the day.
A user wants a list of surgical cases scheduled in the next week grouped by
procedure. They will reference this list at the start of each week to audit room and
