ET 332 Final Exam Preparation Guide: Grantham University

ET 332 Final Exam Preparation Guide This item covers Modules 5-8. Scan, handwrite answers and upload solutions. Show all required calculations for full credit. Design a 16-Bit DAC Circuit Calculate the values for all resistors Include calculations and schematic Capture a screenshot of several input/output settings from the 16-Bit DAC Circuit For a Wien-bridge oscillator Given R = 50Kohm and C = 100nF what is the frequency of oscillation? Given a required frequency of oscillation of f = 10kHz and R = 8kohm, what should the value of C be? Calculate the signal to noise ratio given RMS Noise Voltage = 20mV and RMS Signal Voltage = 2.5V Calculate ETotalRMSgiven e21RMS = 5V and e22RMS = 7V Calculate SNR(dB) given a noise specification of 680nV Calculate the noise specification given SNR(dB) = 350dB For a simulated inductor application, to yield L = 75mH, R1 = 3kohm, and C1 = 200uF, determine required value of R2. For a constant current generator, with a saturation voltage = 20V and a current reference of 30mA, calculate RLmin. For a precision rectifier application, given EIRMS = 5V, determine EOpeak. For an AC to DC converter, given EIPeak= 10V, determine EI.