OSHA 30 CONSTRUCTION PRACTICE TEST Questions with
220 verified Answers Latest Versions 2024 TOP RAT
What are some of the responsibilities employers have related to OSHA
recordkeeping? - ✔✔ANSWER✔✔>>All of the above
All duties required by the stairway and ladder rules must be performed ________
employees begin work that requires them to use the stairways or ladders and
their respective fall protection systems. - ✔✔ANSWER✔✔>>Before
Ladders can be tied or fastened together to create longer sections even if they
are not specifically designed for that purpose. - ✔✔ANSWER✔✔>>False
Non self-supporting and self-supporting portable ladders should support at least
_____ times the maximum intended load. - ✔✔ANSWER✔✔>>4
Stairways must be installed at least _____ degrees, but no more than ____
degrees from the horizontal. - ✔✔ANSWER✔✔>>30, 50
Stair rails installed after March 15, 1991, must be no less than 36 inches in
height. - ✔✔ANSWER✔✔>>True
Which of the following must employees be trained on? - ✔✔ANSWER✔✔>>Which
of the following must employees be trained on?
A common cited hazard for stairways and/or ladders is - ✔✔ANSWER✔✔>>All of
the above
If the total length of the climb on a fixed ladder equals or exceeds 24 feet, fixed
ladders must be equipped with - ✔✔ANSWER✔✔>>Ladder safety devices
If any ladder is used where the worker could be exposed to energized electrical
equipment, it is required that the ladder has ______ and is in the proper position
to avoid any possible electrical hazard. - ✔✔ANSWER✔✔>>Non-conductive side
rails
,The indoor storage of flammable material requires: - ✔✔ANSWER✔✔>>All of the
above
Transferring by means of air pressure on the container or portable tanks is
prohibited - ✔✔ANSWER✔✔>>True
Which of the following is not part of the fire tetrahedron? -
✔✔ANSWER✔✔>>Carbon Dioxide
The distance from any point of a fire protected area to the nearest fire
extinguisher must not exceed ______ feet. - ✔✔ANSWER✔✔>>100
Fire alarms can consist of which of the following? - ✔✔ANSWER✔✔>>All of the
above
________ for light, heat, or power must be properly installed and maintained -
✔✔ANSWER✔✔>>Electrical wiring and equipment
The acronym describing the proper use of a fire extinguisher is -
✔✔ANSWER✔✔>>PASS
Which of the following is not a requirement for open yard storage driveways? -
✔✔ANSWER✔✔>>Driveways must be made of sand
Which of the following is the best place to store flammable and combustible
liquids? - ✔✔ANSWER✔✔>>Both b) and c)
To help further decrease the likelihood of a fire hazard, some employers choose
to implement non-mandatory precautions including - ✔✔ANSWER✔✔>>Fire
watch and hot-work permits
When cylinders are transported by powered vehicles, they must be secured in a
_______ position. - ✔✔ANSWER✔✔>>Vertical
Torches must be - ✔✔ANSWER✔✔>>All of the above
Fire watchers are additional personnel assigned to a work area when normal
_________ are not sufficient - ✔✔ANSWER✔✔>>Fire prevention precautions
Which section of of the OSH Act prohibits employers from discriminating against
workers for exercising their safety and health rights? -
✔✔ANSWER✔✔>>Section 11(c)
Jointers should be fitted with which of the following types of guards -
✔✔ANSWER✔✔>>Point of operation guards
, Impact tools, such as chisels, with _____ heads should be removed from use. -
✔✔ANSWER✔✔>>Mushroom
Most tools that run on liquid fuel are powered by - ✔✔ANSWER✔✔>>Gasoline
Powder-actuated tools should never be used on ________ materials -
✔✔ANSWER✔✔>>Brittle
Jacks must be inspected: - ✔✔ANSWER✔✔>>All of the above
Fixed, power-driven woodworking tools are not required to be provided with a
disconnect switch that can either be locked or tagged in the off position. -
✔✔ANSWER✔✔>>False
Incompliant tools must be which of the following? - ✔✔ANSWER✔✔>>All of the
above
According to OSHA a person who is capable of identifying exisiting and
predictable hazards in the surroundings areas ot working conditions which are
unsanitary, hazardous, or dangerous to employees, and who has authorization
to take prompt corrective measures to eliminate them: - ✔✔ANSWER✔✔>>A
competent person
If a prime contractor subcontracts some of the work on a construction project to
an another firm, unless specified in the contract, which firm is responsible for
"employer obligations" in 1926 Subpart B? - ✔✔ANSWER✔✔>>Prime Contractor
According to Subpart C, how often should combustible scrap and debris be
removed from a site? - ✔✔ANSWER✔✔>>at regular intervals
Which of the following is not required of management when development and
maintaining a safety program? - ✔✔ANSWER✔✔>>Instruct all employees about
confined spaces even if it is not a part of their duties
Which of the following are employer requirements for safety training and
education? - ✔✔ANSWER✔✔>>All of the above
Section 1926.21, Safety Training and Education, states that OSHA must create
programs that apply to both employees and employers - ✔✔ANSWER✔✔>>True
When should the OSHA Annual Summary be posted? -
✔✔ANSWER✔✔>>Between Feb. 1 and April 30 of the next year
220 verified Answers Latest Versions 2024 TOP RAT
What are some of the responsibilities employers have related to OSHA
recordkeeping? - ✔✔ANSWER✔✔>>All of the above
All duties required by the stairway and ladder rules must be performed ________
employees begin work that requires them to use the stairways or ladders and
their respective fall protection systems. - ✔✔ANSWER✔✔>>Before
Ladders can be tied or fastened together to create longer sections even if they
are not specifically designed for that purpose. - ✔✔ANSWER✔✔>>False
Non self-supporting and self-supporting portable ladders should support at least
_____ times the maximum intended load. - ✔✔ANSWER✔✔>>4
Stairways must be installed at least _____ degrees, but no more than ____
degrees from the horizontal. - ✔✔ANSWER✔✔>>30, 50
Stair rails installed after March 15, 1991, must be no less than 36 inches in
height. - ✔✔ANSWER✔✔>>True
Which of the following must employees be trained on? - ✔✔ANSWER✔✔>>Which
of the following must employees be trained on?
A common cited hazard for stairways and/or ladders is - ✔✔ANSWER✔✔>>All of
the above
If the total length of the climb on a fixed ladder equals or exceeds 24 feet, fixed
ladders must be equipped with - ✔✔ANSWER✔✔>>Ladder safety devices
If any ladder is used where the worker could be exposed to energized electrical
equipment, it is required that the ladder has ______ and is in the proper position
to avoid any possible electrical hazard. - ✔✔ANSWER✔✔>>Non-conductive side
rails
,The indoor storage of flammable material requires: - ✔✔ANSWER✔✔>>All of the
above
Transferring by means of air pressure on the container or portable tanks is
prohibited - ✔✔ANSWER✔✔>>True
Which of the following is not part of the fire tetrahedron? -
✔✔ANSWER✔✔>>Carbon Dioxide
The distance from any point of a fire protected area to the nearest fire
extinguisher must not exceed ______ feet. - ✔✔ANSWER✔✔>>100
Fire alarms can consist of which of the following? - ✔✔ANSWER✔✔>>All of the
above
________ for light, heat, or power must be properly installed and maintained -
✔✔ANSWER✔✔>>Electrical wiring and equipment
The acronym describing the proper use of a fire extinguisher is -
✔✔ANSWER✔✔>>PASS
Which of the following is not a requirement for open yard storage driveways? -
✔✔ANSWER✔✔>>Driveways must be made of sand
Which of the following is the best place to store flammable and combustible
liquids? - ✔✔ANSWER✔✔>>Both b) and c)
To help further decrease the likelihood of a fire hazard, some employers choose
to implement non-mandatory precautions including - ✔✔ANSWER✔✔>>Fire
watch and hot-work permits
When cylinders are transported by powered vehicles, they must be secured in a
_______ position. - ✔✔ANSWER✔✔>>Vertical
Torches must be - ✔✔ANSWER✔✔>>All of the above
Fire watchers are additional personnel assigned to a work area when normal
_________ are not sufficient - ✔✔ANSWER✔✔>>Fire prevention precautions
Which section of of the OSH Act prohibits employers from discriminating against
workers for exercising their safety and health rights? -
✔✔ANSWER✔✔>>Section 11(c)
Jointers should be fitted with which of the following types of guards -
✔✔ANSWER✔✔>>Point of operation guards
, Impact tools, such as chisels, with _____ heads should be removed from use. -
✔✔ANSWER✔✔>>Mushroom
Most tools that run on liquid fuel are powered by - ✔✔ANSWER✔✔>>Gasoline
Powder-actuated tools should never be used on ________ materials -
✔✔ANSWER✔✔>>Brittle
Jacks must be inspected: - ✔✔ANSWER✔✔>>All of the above
Fixed, power-driven woodworking tools are not required to be provided with a
disconnect switch that can either be locked or tagged in the off position. -
✔✔ANSWER✔✔>>False
Incompliant tools must be which of the following? - ✔✔ANSWER✔✔>>All of the
above
According to OSHA a person who is capable of identifying exisiting and
predictable hazards in the surroundings areas ot working conditions which are
unsanitary, hazardous, or dangerous to employees, and who has authorization
to take prompt corrective measures to eliminate them: - ✔✔ANSWER✔✔>>A
competent person
If a prime contractor subcontracts some of the work on a construction project to
an another firm, unless specified in the contract, which firm is responsible for
"employer obligations" in 1926 Subpart B? - ✔✔ANSWER✔✔>>Prime Contractor
According to Subpart C, how often should combustible scrap and debris be
removed from a site? - ✔✔ANSWER✔✔>>at regular intervals
Which of the following is not required of management when development and
maintaining a safety program? - ✔✔ANSWER✔✔>>Instruct all employees about
confined spaces even if it is not a part of their duties
Which of the following are employer requirements for safety training and
education? - ✔✔ANSWER✔✔>>All of the above
Section 1926.21, Safety Training and Education, states that OSHA must create
programs that apply to both employees and employers - ✔✔ANSWER✔✔>>True
When should the OSHA Annual Summary be posted? -
✔✔ANSWER✔✔>>Between Feb. 1 and April 30 of the next year
