OSHA 510 questions well answered
already passed
An example of incident Cost would be? - correct answer ✔✔Overtime worked to keep on schedule due
to accident
Protect the safety and health of America's workers is the mission of what the government agrees -
correct answer ✔✔OSHA
The General duty clause states that it is the employers responsibility to provide a workspace free from -
correct answer ✔✔recognized hazards
To ensure consistent enforcement OSHA has set up? - correct answer ✔✔OSHA Directives
the right of workers o seek safety and health on the job without fear of punishment is found in? - correct
answer ✔✔section (c) of the OSHA ACT
OSHA requires that employers __ that abatement is complete for each cited violation. - correct answer
✔✔certify
An OSHA inspection begins with - correct answer ✔✔presentation of credentials
an employee only able to work a partial work shift due to work-related injury is classified as? - correct
answer ✔✔restricted work activity.
The number of recordable injuries and illness per 100 full time workers is known as? - correct answer
✔✔incident rate
when managers know and follow safety and health rules are demonstrating: - correct answer
✔✔management leadership and commitment to safety and health
,Safety and Heath program and jobsites inspections by competent person are 2 main components of
_____ - correct answer ✔✔An employers accident prevention responsibilities
100 ft is the maximum ___ from any protected point to the nearest fire extinguisher - correct answer
✔✔travel distance
_____ signs such as danger and caution shall be visible when work is being performed - correct answer
✔✔Accident prevention
A personal fall arrest system shall bring an employee to a complete stop and limit the ___ 3.5 feet. -
correct answer ✔✔max deceleration distance
Whether paid for by employer or employee, all ____ shall be maintained in a safe condition - correct
answer ✔✔Hand and power tools
____ shall be shielded to protect employees and other persons working in the vicinity. - correct answer
✔✔Arc welding and cutting
Failure to inspect for _____ on regulation fitting, valves , on the cap thread on a cylinder of oxygen can
result in fire - correct answer ✔✔oil and grease
PFAS, when stopping a fall, shall be ____ that the employee cannot fall more than 6ft or contact a lower
level - correct answer ✔✔rigged such
when _____ is/are used perpendicular to a roof edge, the warning lines cannot be closer than ft. -
correct answer ✔✔mechanical equipment
A ___ deals with the cord-set and receptacles which are not part of the permanent wiring of a building
or structure - correct answer ✔✔assured equipment grounding conductor program
electrical equipment that operates at 50 volts or higher shall be ___ against accident contact. - correct
answer ✔✔Guarded
, subpart V states that work to be preformed that is __ shall have a job briefing held before the start of
day or shift - correct answer ✔✔repetitive or similar
Bonding is the practice of connecting two ___ objects to prevent static sparks - correct answer
✔✔metallic
when scaffolding is being erected, moved, dismantled, or altered it shall be ___ by competent person. -
correct answer ✔✔Supervised
Top rail of a guardrail system must be 42 inches +/- _____ above a walking/ working level - correct
answer ✔✔3 inches
a sandy clay loam that has an unconfined compressive strength of 1.2 tsf would be classified as - correct
answer ✔✔Class B soil
Type A soil can be sloped 1/1:2 ration if the excavation is open less than___ and is less than 12 feet in
depth - correct answer ✔✔24 hours
cross bracing on scaffolding is acceptable as a midrail when the cross point is 20-30 inches above the
walking surface and - correct answer ✔✔end point are less than 48 inches apart
The results of work place injury and illness may include: - correct answer ✔✔lower morale and increase
cost to train and replace workers
Osha Mission is to - correct answer ✔✔Protect the safety and health of American workers
The right of workers to seek safety and health on the job without fear of punishment can be found in? -
correct answer ✔✔section (c) of the OSHA ACT
when was the OSHA Act sign into law? - correct answer ✔✔1970
already passed
An example of incident Cost would be? - correct answer ✔✔Overtime worked to keep on schedule due
to accident
Protect the safety and health of America's workers is the mission of what the government agrees -
correct answer ✔✔OSHA
The General duty clause states that it is the employers responsibility to provide a workspace free from -
correct answer ✔✔recognized hazards
To ensure consistent enforcement OSHA has set up? - correct answer ✔✔OSHA Directives
the right of workers o seek safety and health on the job without fear of punishment is found in? - correct
answer ✔✔section (c) of the OSHA ACT
OSHA requires that employers __ that abatement is complete for each cited violation. - correct answer
✔✔certify
An OSHA inspection begins with - correct answer ✔✔presentation of credentials
an employee only able to work a partial work shift due to work-related injury is classified as? - correct
answer ✔✔restricted work activity.
The number of recordable injuries and illness per 100 full time workers is known as? - correct answer
✔✔incident rate
when managers know and follow safety and health rules are demonstrating: - correct answer
✔✔management leadership and commitment to safety and health
,Safety and Heath program and jobsites inspections by competent person are 2 main components of
_____ - correct answer ✔✔An employers accident prevention responsibilities
100 ft is the maximum ___ from any protected point to the nearest fire extinguisher - correct answer
✔✔travel distance
_____ signs such as danger and caution shall be visible when work is being performed - correct answer
✔✔Accident prevention
A personal fall arrest system shall bring an employee to a complete stop and limit the ___ 3.5 feet. -
correct answer ✔✔max deceleration distance
Whether paid for by employer or employee, all ____ shall be maintained in a safe condition - correct
answer ✔✔Hand and power tools
____ shall be shielded to protect employees and other persons working in the vicinity. - correct answer
✔✔Arc welding and cutting
Failure to inspect for _____ on regulation fitting, valves , on the cap thread on a cylinder of oxygen can
result in fire - correct answer ✔✔oil and grease
PFAS, when stopping a fall, shall be ____ that the employee cannot fall more than 6ft or contact a lower
level - correct answer ✔✔rigged such
when _____ is/are used perpendicular to a roof edge, the warning lines cannot be closer than ft. -
correct answer ✔✔mechanical equipment
A ___ deals with the cord-set and receptacles which are not part of the permanent wiring of a building
or structure - correct answer ✔✔assured equipment grounding conductor program
electrical equipment that operates at 50 volts or higher shall be ___ against accident contact. - correct
answer ✔✔Guarded
, subpart V states that work to be preformed that is __ shall have a job briefing held before the start of
day or shift - correct answer ✔✔repetitive or similar
Bonding is the practice of connecting two ___ objects to prevent static sparks - correct answer
✔✔metallic
when scaffolding is being erected, moved, dismantled, or altered it shall be ___ by competent person. -
correct answer ✔✔Supervised
Top rail of a guardrail system must be 42 inches +/- _____ above a walking/ working level - correct
answer ✔✔3 inches
a sandy clay loam that has an unconfined compressive strength of 1.2 tsf would be classified as - correct
answer ✔✔Class B soil
Type A soil can be sloped 1/1:2 ration if the excavation is open less than___ and is less than 12 feet in
depth - correct answer ✔✔24 hours
cross bracing on scaffolding is acceptable as a midrail when the cross point is 20-30 inches above the
walking surface and - correct answer ✔✔end point are less than 48 inches apart
The results of work place injury and illness may include: - correct answer ✔✔lower morale and increase
cost to train and replace workers
Osha Mission is to - correct answer ✔✔Protect the safety and health of American workers
The right of workers to seek safety and health on the job without fear of punishment can be found in? -
correct answer ✔✔section (c) of the OSHA ACT
when was the OSHA Act sign into law? - correct answer ✔✔1970
