2024 Newest|CNC Mill operator test|2024-2025 UPDATE|COMPREHENS
FREQUENTLY MOST TESTED QUESTIONS AND VERIFIED ANSWERS|G
IT 100% ACCURATE!!
Study online at https://quizlet.com/_g1epm7
1. The area of the control keypad that offset
allows the operator to show differ-
ent information, such as offsets, ma-
chine settings, and the current pro-
gram.
2. The area of the control keypad that al- Alpha keys
lows an operator to enter letters and
special characters
into the control.
3. A code used to signal an action M codes
from a miscellaneous group of com-
mands.
4. An offset used on the machining cen- Tool offset
ter that accounts for variations in tool
length along the Z-
axis.
5. In zero return mode, the key that re- Home 28
turns and initializes all axes to ma-
chine zero or Home.
6. The rate that the cutting tool or work Feed rate
piece moves at the point of contact.
7. The control button used to pause a Feed hold
program.
8. CYCLE START The control button used to begin a
program or continue a program that
has been
previously stopped.
9. FEED HOLD The control button used to pause a
program.
1/4
FREQUENTLY MOST TESTED QUESTIONS AND VERIFIED ANSWERS|G
IT 100% ACCURATE!!
Study online at https://quizlet.com/_g1epm7
1. The area of the control keypad that offset
allows the operator to show differ-
ent information, such as offsets, ma-
chine settings, and the current pro-
gram.
2. The area of the control keypad that al- Alpha keys
lows an operator to enter letters and
special characters
into the control.
3. A code used to signal an action M codes
from a miscellaneous group of com-
mands.
4. An offset used on the machining cen- Tool offset
ter that accounts for variations in tool
length along the Z-
axis.
5. In zero return mode, the key that re- Home 28
turns and initializes all axes to ma-
chine zero or Home.
6. The rate that the cutting tool or work Feed rate
piece moves at the point of contact.
7. The control button used to pause a Feed hold
program.
8. CYCLE START The control button used to begin a
program or continue a program that
has been
previously stopped.
9. FEED HOLD The control button used to pause a
program.
1/4
