DCOM 219 FINAL EXAM NEWEST 2024-2025 ACTUAL EXAM NEWEST CO
PLETE 250 QUESTIONS AND CORRECT DETAILED ANSWERS (VERIFI
ANSWERS
Study online at https://quizlet.com/_ftdye9
1. What are two expected features of modern enter- support for converged
prise networks? (Choose two.) network traffic
support for critical ap-
plications
2. Which type of information is displayed by the the configured routing
show ip protocols command that is issued from protocols and the net-
a router command prompt? works that the router is
advertising
3. Which action should be taken when planning for add alternate physical
redundancy on a hierarchical network design? paths for data to tra-
verse the network
4. In the Cisco Enterprise Architecture, which two distribution layer
functional parts of the network are combined to
form a collapsed core design? (Choose two.)
5. What are two ways to access a Cisco switch for a connection that uses
out-of-band management? (Choose two.) the AUX port*a con-
nection that uses the
AUX port
a connection that uses
the console port
6. How can an enterprise network be designed to by organizing the net-
optimize bandwidth? work to control traffic
patterns
7. Refer to the exhibit. Which devices exist in the PC_3 and AP_2
failure domain when switch S3 loses power?
8. As the network administrator you have been grouping multiple
asked to implement EtherChannel on the corpo- physical ports to in-
rate network. What does this configuration con- crease bandwidth be-
sist of? tween two switches
9. rack unit
, DCOM 219 FINAL EXAM NEWEST 2024-2025 ACTUAL EXAM NEWEST CO
PLETE 250 QUESTIONS AND CORRECT DETAILED ANSWERS (VERIFI
ANSWERS
Study online at https://quizlet.com/_ftdye9
What term is used to express the thickness or
height of a switch?
10. What is the function of ASICs in a multilayer They streamline for-
switch? warding of IP pack-
ets in a multilayer
switch by bypassing
the CPU.
11. Which design feature will limit the size of a failure the use of the building
domain in an enterprise network? switch block approach
12. A network administrator is planning redundant Redundant paths can
devices and cabling in a switched network to be available without
support high availability. Which benefit will imple- causing logical Layer
menting the Spanning Tree Protocol provide to 2 loops.
this design?
13. What are two benefits of extending access layer increased flexibility
connectivity to users through a wireless medium? reduced costs
(Choose two.)
14. Which two features of enterprise class equip- failover capabilities
ment assists an enterprise network in maintaining redundant power sup-
99.999 percent up-time? (Choose two.) plies
15. A network technician needs to connect a PC to terminal emulation
a Cisco network device for initial configuration. client
What is required to perform this device configu-
ration?
16. What network design would contain the scope of the deployment of dis-
disruptions on a network should a failure occur? tribution layer switch-
es in pairs and the di-
vision of access lay-
er switch connections
between them
, DCOM 219 FINAL EXAM NEWEST 2024-2025 ACTUAL EXAM NEWEST CO
PLETE 250 QUESTIONS AND CORRECT DETAILED ANSWERS (VERIFI
ANSWERS
Study online at https://quizlet.com/_ftdye9
17. What are three access layer switch features forwarding rate
that are considered when designing a network? Power over Ethernet
(Choose three.)? port density
18. What are two functions of a router? (Choose two.) It connects multiple IP
networks.
It determines the best
path to send packets.
19. What capability is provided by the use of applica- forwarding of IP pack-
tion-specific integrated circuits in Cisco multilay- ets independent of the
er switches? CPU
20. Which statement describes a characteristic of They are cloud-man-
Cisco Meraki switches? aged access switch-
es that enable virtual
stacking of switches.
21. A network engineer is reviewing a network de- a modular router
sign that uses a fixed configuration enterprise
router that supports both LAN and WAN con-
nections. However, the engineer realizes that the
router does not have enough interfaces to sup-
port growth and network expansion. Which type
of device should be used as a replacement?
22. In which situation would a network administrator on a data center net-
install a Cisco Nexus Series or Cisco Catalyst work to provide ex-
6500 Series switch to promote infrastructure scal- pansion and transport
ability? flexibility
23. Which statement describes a characteristic of New Cisco Cata-
Cisco Catalyst 2960 switches? lyst 2960-C switch-
es support PoE
pass-through.
24. show port-security ad-
dress
, DCOM 219 FINAL EXAM NEWEST 2024-2025 ACTUAL EXAM NEWEST CO
PLETE 250 QUESTIONS AND CORRECT DETAILED ANSWERS (VERIFI
ANSWERS
Study online at https://quizlet.com/_ftdye9
Refer to the exhibit. Which command was issued
on a Cisco switch that resulted in the exhibited
output?
25. What is a characteristic of in-band device man- It is used to moni-
agement? tor and make config-
uration changes to a
network device over a
network connection.
26. Which two requirements must always be met to at least one network
use in-band management to configure a network interface that is con-
device? (Choose two.) nected and opera-
tional
Telnet, SSH, or HTTP
access to the device
27. When a Cisco IOS device is being selected or feature set
upgraded, which option indicates the capabilities
of the Cisco IOS device?
28. Immediately after a router completes its boot se- show startup-config
quence, the network administrator wants to check show running-config
the routers configuration. From privileged EXEC
mode, which of the following commands can the
administrator use for this purpose? (Choose two.)
29. What is the function of PoE pass-through? allows switches,
phones, and wireless
access points to re-
ceive power over ex-
isting Ethernet ca-
bles from an upstream
switch
30. A switch is participating in a VTP domain and vlan 10
configured as a VTP server. The switch needs name Manufacturing
to propagate VLAN 10 (used by the Manufactur- exit
PLETE 250 QUESTIONS AND CORRECT DETAILED ANSWERS (VERIFI
ANSWERS
Study online at https://quizlet.com/_ftdye9
1. What are two expected features of modern enter- support for converged
prise networks? (Choose two.) network traffic
support for critical ap-
plications
2. Which type of information is displayed by the the configured routing
show ip protocols command that is issued from protocols and the net-
a router command prompt? works that the router is
advertising
3. Which action should be taken when planning for add alternate physical
redundancy on a hierarchical network design? paths for data to tra-
verse the network
4. In the Cisco Enterprise Architecture, which two distribution layer
functional parts of the network are combined to
form a collapsed core design? (Choose two.)
5. What are two ways to access a Cisco switch for a connection that uses
out-of-band management? (Choose two.) the AUX port*a con-
nection that uses the
AUX port
a connection that uses
the console port
6. How can an enterprise network be designed to by organizing the net-
optimize bandwidth? work to control traffic
patterns
7. Refer to the exhibit. Which devices exist in the PC_3 and AP_2
failure domain when switch S3 loses power?
8. As the network administrator you have been grouping multiple
asked to implement EtherChannel on the corpo- physical ports to in-
rate network. What does this configuration con- crease bandwidth be-
sist of? tween two switches
9. rack unit
, DCOM 219 FINAL EXAM NEWEST 2024-2025 ACTUAL EXAM NEWEST CO
PLETE 250 QUESTIONS AND CORRECT DETAILED ANSWERS (VERIFI
ANSWERS
Study online at https://quizlet.com/_ftdye9
What term is used to express the thickness or
height of a switch?
10. What is the function of ASICs in a multilayer They streamline for-
switch? warding of IP pack-
ets in a multilayer
switch by bypassing
the CPU.
11. Which design feature will limit the size of a failure the use of the building
domain in an enterprise network? switch block approach
12. A network administrator is planning redundant Redundant paths can
devices and cabling in a switched network to be available without
support high availability. Which benefit will imple- causing logical Layer
menting the Spanning Tree Protocol provide to 2 loops.
this design?
13. What are two benefits of extending access layer increased flexibility
connectivity to users through a wireless medium? reduced costs
(Choose two.)
14. Which two features of enterprise class equip- failover capabilities
ment assists an enterprise network in maintaining redundant power sup-
99.999 percent up-time? (Choose two.) plies
15. A network technician needs to connect a PC to terminal emulation
a Cisco network device for initial configuration. client
What is required to perform this device configu-
ration?
16. What network design would contain the scope of the deployment of dis-
disruptions on a network should a failure occur? tribution layer switch-
es in pairs and the di-
vision of access lay-
er switch connections
between them
, DCOM 219 FINAL EXAM NEWEST 2024-2025 ACTUAL EXAM NEWEST CO
PLETE 250 QUESTIONS AND CORRECT DETAILED ANSWERS (VERIFI
ANSWERS
Study online at https://quizlet.com/_ftdye9
17. What are three access layer switch features forwarding rate
that are considered when designing a network? Power over Ethernet
(Choose three.)? port density
18. What are two functions of a router? (Choose two.) It connects multiple IP
networks.
It determines the best
path to send packets.
19. What capability is provided by the use of applica- forwarding of IP pack-
tion-specific integrated circuits in Cisco multilay- ets independent of the
er switches? CPU
20. Which statement describes a characteristic of They are cloud-man-
Cisco Meraki switches? aged access switch-
es that enable virtual
stacking of switches.
21. A network engineer is reviewing a network de- a modular router
sign that uses a fixed configuration enterprise
router that supports both LAN and WAN con-
nections. However, the engineer realizes that the
router does not have enough interfaces to sup-
port growth and network expansion. Which type
of device should be used as a replacement?
22. In which situation would a network administrator on a data center net-
install a Cisco Nexus Series or Cisco Catalyst work to provide ex-
6500 Series switch to promote infrastructure scal- pansion and transport
ability? flexibility
23. Which statement describes a characteristic of New Cisco Cata-
Cisco Catalyst 2960 switches? lyst 2960-C switch-
es support PoE
pass-through.
24. show port-security ad-
dress
, DCOM 219 FINAL EXAM NEWEST 2024-2025 ACTUAL EXAM NEWEST CO
PLETE 250 QUESTIONS AND CORRECT DETAILED ANSWERS (VERIFI
ANSWERS
Study online at https://quizlet.com/_ftdye9
Refer to the exhibit. Which command was issued
on a Cisco switch that resulted in the exhibited
output?
25. What is a characteristic of in-band device man- It is used to moni-
agement? tor and make config-
uration changes to a
network device over a
network connection.
26. Which two requirements must always be met to at least one network
use in-band management to configure a network interface that is con-
device? (Choose two.) nected and opera-
tional
Telnet, SSH, or HTTP
access to the device
27. When a Cisco IOS device is being selected or feature set
upgraded, which option indicates the capabilities
of the Cisco IOS device?
28. Immediately after a router completes its boot se- show startup-config
quence, the network administrator wants to check show running-config
the routers configuration. From privileged EXEC
mode, which of the following commands can the
administrator use for this purpose? (Choose two.)
29. What is the function of PoE pass-through? allows switches,
phones, and wireless
access points to re-
ceive power over ex-
isting Ethernet ca-
bles from an upstream
switch
30. A switch is participating in a VTP domain and vlan 10
configured as a VTP server. The switch needs name Manufacturing
to propagate VLAN 10 (used by the Manufactur- exit
