ICC Vapor Recovery 1 Pt. 2 Exam
Questions and Answers 100% Solved
Under Dispenser Containment is required to be designed and constructed
in accordance with ____.
a. the appropriate Executive Order
b. generally accepted secondary containment practices
c. standards of an independent testing organization with industry code
d. an engineering specification approved by a state registered professional
engineer or engineering standard - ✔✔c. standards of an independent
testing organization with industry code
With a Gilbarco Vapor-Vac, the OPW 12VW nozzle has a hole or tear in the
vapor escape guard, it is a defect if ____% of the circumference is missing.
a. 25%
b. 75%
c. 50%
1
©JOSHCLAY 2024/2025. YEAR PUBLISHED 2024.
,d. 65% - ✔✔b. 75%
Gasoline thread sealant can be used on all except _____.
a. threaded portion of rotatable adapters
b. p/v valve
c. ball float
d. riser adapter - ✔✔a. threaded portion of rotatable adapters
when installing copper tubing use all except _____.
a. copper tubing cutter
b. copper bending tool
c. copper flaring tool
d. copper stretching tool - ✔✔d. copper stretching tool
The Husky P/V valve has a torque range of...
a. 50-75 lbs
b. 20-50 lbs
c. 30-50 lbs
d. 40-50 lbs - ✔✔b. 20-50 lbs
2
©JOSHCLAY 2024/2025. YEAR PUBLISHED 2024.
, When installing the hanging hardware together use...
a. pipe dope
b. non-hardening sealant
c. teflon tape
d. oil or grease - ✔✔d. oil or grease
When installing in the EO VR-101-E you should have on site _____.
a. the executive order
b. Phil-tite installation manual
c. the equipment checklist
d. all the above - ✔✔d. all the above
There are four ball valves on the clean air separator, what position are they
to be in?
a. top and bottom valve open, the rest are closed
b. top and bottom valve closed, the rest are open
c. top valve open, the rest are closed
d. bottom valve open, the rest are closed - ✔✔c. top valve open, the rest
are closed
3
©JOSHCLAY 2024/2025. YEAR PUBLISHED 2024.
Questions and Answers 100% Solved
Under Dispenser Containment is required to be designed and constructed
in accordance with ____.
a. the appropriate Executive Order
b. generally accepted secondary containment practices
c. standards of an independent testing organization with industry code
d. an engineering specification approved by a state registered professional
engineer or engineering standard - ✔✔c. standards of an independent
testing organization with industry code
With a Gilbarco Vapor-Vac, the OPW 12VW nozzle has a hole or tear in the
vapor escape guard, it is a defect if ____% of the circumference is missing.
a. 25%
b. 75%
c. 50%
1
©JOSHCLAY 2024/2025. YEAR PUBLISHED 2024.
,d. 65% - ✔✔b. 75%
Gasoline thread sealant can be used on all except _____.
a. threaded portion of rotatable adapters
b. p/v valve
c. ball float
d. riser adapter - ✔✔a. threaded portion of rotatable adapters
when installing copper tubing use all except _____.
a. copper tubing cutter
b. copper bending tool
c. copper flaring tool
d. copper stretching tool - ✔✔d. copper stretching tool
The Husky P/V valve has a torque range of...
a. 50-75 lbs
b. 20-50 lbs
c. 30-50 lbs
d. 40-50 lbs - ✔✔b. 20-50 lbs
2
©JOSHCLAY 2024/2025. YEAR PUBLISHED 2024.
, When installing the hanging hardware together use...
a. pipe dope
b. non-hardening sealant
c. teflon tape
d. oil or grease - ✔✔d. oil or grease
When installing in the EO VR-101-E you should have on site _____.
a. the executive order
b. Phil-tite installation manual
c. the equipment checklist
d. all the above - ✔✔d. all the above
There are four ball valves on the clean air separator, what position are they
to be in?
a. top and bottom valve open, the rest are closed
b. top and bottom valve closed, the rest are open
c. top valve open, the rest are closed
d. bottom valve open, the rest are closed - ✔✔c. top valve open, the rest
are closed
3
©JOSHCLAY 2024/2025. YEAR PUBLISHED 2024.
