Field tech 2-3 Final Exam Questions And
Already Passed Answers.
What is unique about WDM - PON ? - Answer WDM-PON deployed in a greenfield system allows each
subscriber to get their own designated wavelength.
What is the main benefit of deploying WDM technology? - Answer It will increase the capacity of the
existing fiber networks tenfold without adding any more fiber.
How are optical splitters used in the forward path? - Answer As passive branching devices that divide
an optical signal across multiple output fibers.
What is the purpose of a fiber demarcation box? - Answer It provides a safe place to splice, split,
distribute, store, and cross-connect fiber optics.
What is the purpose of the MST? - Answer It provides access to connect fiber-optic cable drops from
the customer premises to the network.
What is the one main function of the FDH? - Answer The FDH provides effective fiber management by
grouping
splitters into local serving areas
Which PON element uses patch panels? - Answer ODN
Which type of fiber topology used in a PON places the PON
splitters at the headend while providing one designated fiber
for every customer premise? - Answer Home-Run
What are the three categories of the fiber-optic cable used to identify the location of the fiber in the
network? - Answer Trunk, branch, and drop.
,What is the difference between the FTTN and FTTC
topologies? - Answer An FTC is allowed a smaller number of RF amplifiers between
the optical fiber and the customer premises.
What is the purpose of the SDU? - Answer It provides surge protection, a test jack, circuit protection,
wiring management, and fiber termination.
What are the advantages of loose buffer tube fiber? - Answer It offers the best protection for the fibers
under high pulling tension and moisture with its fiber-coated gel.
What is an ONU/ONT? - Answer It is a device that converts light from fiber to RF for coaxial
distribution into the home.
What are the characteristics of ITU-T G.657 BIF? - Answer It is flexible for installation in small spaces
and has a small bend
radius of 7.5 mm or 10 mm.
What le true about using a premade fiber-optic pigtail for
splicing to patch panels or terminal equipment? - Answer It is faster and more rellable than installing
eonnectors in the
field.
What is the proper way to handle fiber once it is spliced? - Answer At the heat-shrink protective sleeve
that has a steel bar inside it.
What is the purpose of the ground block? - Answer To protect fragile electronics like TV's and STBs
from damaging lightning strikes and power surges.
In a PON FTTx network, which OSP device contains fiber test
points that will minimize service disruption to customers? - Answer FDH (Fiber Distribution Hub)
, What parameter is critical in an OTDR when testing a PON with
significant splitters losses? - Answer High Dynamic Range
What is the best approach to repairing an aerial fiber-optic
drop cable for FTTx applications? - Answer Replace the entire section of fiber drop cable.
(-25) + (42) + (-62) + (20) =? - Answer -25
(17) x (-19) =? - Answer -323
-17-(-34)=？ - Answer 17
-49 ÷ -7? - Answer 7
(20) ÷ (-4) + (-2) x (-10) - (-2) x (7) =? - Answer 29
3 6/9 + 6 1/3 + 9 5/9= - Answer 19 5/9
7 3/8 ÷7 1/4= - Answer 1. 1/58
8.13 X 0.123 =? - Answer 0.99999
0.5349 ÷ 0.1420? - Answer 3.7669014
67.84 + 81.786 + 4281.98 = ? - Answer 4,431.606
0.00004= ——- × 10 to the power of ——? - Answer 4,-5
What is the square of 7? - Answer 49
Already Passed Answers.
What is unique about WDM - PON ? - Answer WDM-PON deployed in a greenfield system allows each
subscriber to get their own designated wavelength.
What is the main benefit of deploying WDM technology? - Answer It will increase the capacity of the
existing fiber networks tenfold without adding any more fiber.
How are optical splitters used in the forward path? - Answer As passive branching devices that divide
an optical signal across multiple output fibers.
What is the purpose of a fiber demarcation box? - Answer It provides a safe place to splice, split,
distribute, store, and cross-connect fiber optics.
What is the purpose of the MST? - Answer It provides access to connect fiber-optic cable drops from
the customer premises to the network.
What is the one main function of the FDH? - Answer The FDH provides effective fiber management by
grouping
splitters into local serving areas
Which PON element uses patch panels? - Answer ODN
Which type of fiber topology used in a PON places the PON
splitters at the headend while providing one designated fiber
for every customer premise? - Answer Home-Run
What are the three categories of the fiber-optic cable used to identify the location of the fiber in the
network? - Answer Trunk, branch, and drop.
,What is the difference between the FTTN and FTTC
topologies? - Answer An FTC is allowed a smaller number of RF amplifiers between
the optical fiber and the customer premises.
What is the purpose of the SDU? - Answer It provides surge protection, a test jack, circuit protection,
wiring management, and fiber termination.
What are the advantages of loose buffer tube fiber? - Answer It offers the best protection for the fibers
under high pulling tension and moisture with its fiber-coated gel.
What is an ONU/ONT? - Answer It is a device that converts light from fiber to RF for coaxial
distribution into the home.
What are the characteristics of ITU-T G.657 BIF? - Answer It is flexible for installation in small spaces
and has a small bend
radius of 7.5 mm or 10 mm.
What le true about using a premade fiber-optic pigtail for
splicing to patch panels or terminal equipment? - Answer It is faster and more rellable than installing
eonnectors in the
field.
What is the proper way to handle fiber once it is spliced? - Answer At the heat-shrink protective sleeve
that has a steel bar inside it.
What is the purpose of the ground block? - Answer To protect fragile electronics like TV's and STBs
from damaging lightning strikes and power surges.
In a PON FTTx network, which OSP device contains fiber test
points that will minimize service disruption to customers? - Answer FDH (Fiber Distribution Hub)
, What parameter is critical in an OTDR when testing a PON with
significant splitters losses? - Answer High Dynamic Range
What is the best approach to repairing an aerial fiber-optic
drop cable for FTTx applications? - Answer Replace the entire section of fiber drop cable.
(-25) + (42) + (-62) + (20) =? - Answer -25
(17) x (-19) =? - Answer -323
-17-(-34)=？ - Answer 17
-49 ÷ -7? - Answer 7
(20) ÷ (-4) + (-2) x (-10) - (-2) x (7) =? - Answer 29
3 6/9 + 6 1/3 + 9 5/9= - Answer 19 5/9
7 3/8 ÷7 1/4= - Answer 1. 1/58
8.13 X 0.123 =? - Answer 0.99999
0.5349 ÷ 0.1420? - Answer 3.7669014
67.84 + 81.786 + 4281.98 = ? - Answer 4,431.606
0.00004= ——- × 10 to the power of ——? - Answer 4,-5
What is the square of 7? - Answer 49
