Neiep semester 100 final review Latest Update
2024-2025 Actual Exam from Credible Source
with 50 Questions and 100% Verified Detailed
Correct Answers Guaranteed
A suspended scaffold contains 3 basic systems which hold, hand and protect. What are
these systems - CORRECT ANSWER: Support system, suspended system and safety
system
After hitting pit stop switch what is the minimum amount of time you should wait to
ensure the elevator you are working on does not move - CORRECT ANSWER: 20
seconds
An elevator mechanic working in a traction machine room should avoid entanglement by
taking which of the following precautions - CORRECT ANSWER: Tucking in loose
clothing
An individual can be killed by as little as how many amperes of current - CORRECT
ANSWER: .005
Any time a mechanic is doing any work in the elevator pit, which device is used to
disable the elevator from movement - CORRECT ANSWER: pit stop switch
Before working in the pit, what two devices must be tested and verified - CORRECT
ANSWER: Door lock and pit switch
Drawings that are approved by the building owner or representative are labeled with
what term - CORRECT ANSWER: Final
Due to the risk of injury to the public which device should always be checked for proper
operation during routine maintenance - CORRECT ANSWER: Door reopening device
, False cars must be equipped with spring-loaded safeties that are manually held in which
position? - CORRECT ANSWER: Open
How often should you inspect the parts of a working platform - CORRECT ANSWER:
Before each use
How should a mechanic access a pit that is greater than 48 inches in depth -
CORRECT ANSWER: Pit ladder
How to turn Kg to Lbs - CORRECT ANSWER: Multiply by 2.2
How to turn Lbs to Kg - CORRECT ANSWER: Divide by 2.2
How would you describe a class 3 fit for shaft and bore diameters - CORRECT
ANSWER: Snuggest possible allowance
If working in a noisy machine room what is a possible hazard - CORRECT ANSWER:
impaired communication
In a standard orthographic projection drawing, where is the placement of a back view if
needed - CORRECT ANSWER: Off to one side of the working drawing
Inches to millimeters - CORRECT ANSWER: multiply by 25.4
Installing hoistway limit switches what drawing will the mechanic reference - CORRECT
ANSWER: Standardized detail drawing
millimeters to inches - CORRECT ANSWER: divide by 25.4
2024-2025 Actual Exam from Credible Source
with 50 Questions and 100% Verified Detailed
Correct Answers Guaranteed
A suspended scaffold contains 3 basic systems which hold, hand and protect. What are
these systems - CORRECT ANSWER: Support system, suspended system and safety
system
After hitting pit stop switch what is the minimum amount of time you should wait to
ensure the elevator you are working on does not move - CORRECT ANSWER: 20
seconds
An elevator mechanic working in a traction machine room should avoid entanglement by
taking which of the following precautions - CORRECT ANSWER: Tucking in loose
clothing
An individual can be killed by as little as how many amperes of current - CORRECT
ANSWER: .005
Any time a mechanic is doing any work in the elevator pit, which device is used to
disable the elevator from movement - CORRECT ANSWER: pit stop switch
Before working in the pit, what two devices must be tested and verified - CORRECT
ANSWER: Door lock and pit switch
Drawings that are approved by the building owner or representative are labeled with
what term - CORRECT ANSWER: Final
Due to the risk of injury to the public which device should always be checked for proper
operation during routine maintenance - CORRECT ANSWER: Door reopening device
, False cars must be equipped with spring-loaded safeties that are manually held in which
position? - CORRECT ANSWER: Open
How often should you inspect the parts of a working platform - CORRECT ANSWER:
Before each use
How should a mechanic access a pit that is greater than 48 inches in depth -
CORRECT ANSWER: Pit ladder
How to turn Kg to Lbs - CORRECT ANSWER: Multiply by 2.2
How to turn Lbs to Kg - CORRECT ANSWER: Divide by 2.2
How would you describe a class 3 fit for shaft and bore diameters - CORRECT
ANSWER: Snuggest possible allowance
If working in a noisy machine room what is a possible hazard - CORRECT ANSWER:
impaired communication
In a standard orthographic projection drawing, where is the placement of a back view if
needed - CORRECT ANSWER: Off to one side of the working drawing
Inches to millimeters - CORRECT ANSWER: multiply by 25.4
Installing hoistway limit switches what drawing will the mechanic reference - CORRECT
ANSWER: Standardized detail drawing
millimeters to inches - CORRECT ANSWER: divide by 25.4
