1p051 CDC Edit Code 03 Vol. 1 - Vol. 3 (URE's)
1. Which source of supply is responsible for cradle-to-grave management of every Air Force weapon
system?: Air Force Material Command (AFMC)
2. Which source of supply manages and purchases common consumable items used by all the
military services and some civilian agencies?: Defense Logistics Agency (DLA)
3. Which source of supply allows items to be made according to the cus- tomer's
specifications?: Local Manufacture
4. Which element of supply would you contact if you wanted to obtain individ- ual mobility
equipment?: Individual protective equipment (IPE)
5. As a supply customer, which section is your primary focal point for the vast majority of supply
orders or questions relating to supply?: Customer support
6. Which element of supply would you contact to turn in equipment?: Equip- ment accountability
7. What designator is used the expendability status, level of repair, cost cat- egory of an item?:
Expendability, reparability, recoverability category designator (ERRCD)
8. Which Expendability, reparability, recoverability category designator (ER- RCD) indicates an
expendable user repair expense item?: XB3
9. The responsibility of a person to compensate for property lost, destroyed, or damaged because of
their mismanagement or negligence while in their use, care, or custody is known as what type of
liability?: Financial
10.Within how many days will all adjustments or corrections to accountable records be
accomplished, following initial comparison of the count to record balance?: 30
,11.Usually, what type of item is listed in allowance documents?: Nonexpend- able
12.What form do you use to change an authorization on an allowance source code (ASC)?: AF Form
601, equipment action request
13.An example of an expendable supply item would be a...: pencil
14.The amount of expendable supplies authorized is based on...: past con- sumption rates
15.When you inspect equipment, which supply condition code (SCC) do you apply to material with
more than six months shelf-life remaining?: A
16.During equipment inspection, which supply condition code (SCC) applies to material that is
economically repairable and requires repair, overhaul or reconditioning?: F
17.You are performing a routine equipment inspection and find material re- quiring additional parts
or components to complete the end item prior to issue, which supply condition code (SCC) do you
assign?: G
18.Which supply condition tag would you use to identify a condemned G-suit awaiting pickup from
supply?: DD Form 1577
19.The expendability, recoverability, reparability cost (ERRC) designator code that identifies due-in
from maintenance (DIFM) items is...: XD
20.Which Department of Defense (DOD) and Air Force (AF) forms are used when requesting an
item that does not have a federal stock number (FSN) assigned or additional information is
necessary for procurement?: AF Form 2005 and DD Form 1348-6
21.What Air Force Instruction (AFI) requires your shop to have a budget?: AFI 11-301V1
22.We write our budgets for how many fiscal years in advance?: One
23.Operation and maintenance (O&M): What type of funding is used for expenses that your unit
, has to pay for?
24.Who is able to view the Air Force technical order (TO) catalog information about all active Air
Force TOs and view electronic technical orders through the Enhanced Technical Information
Management System (ETIMS)?: Air Force Portal users with a common access card (CAC)
25.Which screen displays the complete and real-time information for all tech- nical orders?: TO
Detail
26.Which technical order (TO) number indicates electronic or Internet access distribution through
the Enhanced Technical Information Management Sys- tem (ETIMS)?: TO 00-5-1-WA-1
27.Which Enhanced Technical Information Management System (ETIMS) fea- ture enables technical
order (TO) users to view properly formatted, numbered and indexed electronic technical orders (e-TO)
associated with the e-TO library accounts to which the have access?: TO Viewer
28.Where must electronic technical order (e-TO) content reside to allow an e-Tool to be
disconnected and taken to a point where the e-TO is needed?: - Physically on each e-Tool
29.When making a recommended change to a technical order, how must the change be identified?:
As an improvement or correction
30.Which publication provides detailed completion instructions for a recom- mended technical
order (TO) change?: TO 00-5-1
31.How are all technical time compliance technical order (TCTO) deficiencies submitted?: Urgent
32.Within how many calendar days after your submittal of a routine report must the technical
content manager (TCM) respond?: 45
33.Which form is used to document each discrepancy discovered by aircrew or maintenance
personnel noted before, during, and after each flight?: AFTO Form 781A
34.What documentation does aircrew flight equipment (AFE) personnel main- tain for all assigned
1. Which source of supply is responsible for cradle-to-grave management of every Air Force weapon
system?: Air Force Material Command (AFMC)
2. Which source of supply manages and purchases common consumable items used by all the
military services and some civilian agencies?: Defense Logistics Agency (DLA)
3. Which source of supply allows items to be made according to the cus- tomer's
specifications?: Local Manufacture
4. Which element of supply would you contact if you wanted to obtain individ- ual mobility
equipment?: Individual protective equipment (IPE)
5. As a supply customer, which section is your primary focal point for the vast majority of supply
orders or questions relating to supply?: Customer support
6. Which element of supply would you contact to turn in equipment?: Equip- ment accountability
7. What designator is used the expendability status, level of repair, cost cat- egory of an item?:
Expendability, reparability, recoverability category designator (ERRCD)
8. Which Expendability, reparability, recoverability category designator (ER- RCD) indicates an
expendable user repair expense item?: XB3
9. The responsibility of a person to compensate for property lost, destroyed, or damaged because of
their mismanagement or negligence while in their use, care, or custody is known as what type of
liability?: Financial
10.Within how many days will all adjustments or corrections to accountable records be
accomplished, following initial comparison of the count to record balance?: 30
,11.Usually, what type of item is listed in allowance documents?: Nonexpend- able
12.What form do you use to change an authorization on an allowance source code (ASC)?: AF Form
601, equipment action request
13.An example of an expendable supply item would be a...: pencil
14.The amount of expendable supplies authorized is based on...: past con- sumption rates
15.When you inspect equipment, which supply condition code (SCC) do you apply to material with
more than six months shelf-life remaining?: A
16.During equipment inspection, which supply condition code (SCC) applies to material that is
economically repairable and requires repair, overhaul or reconditioning?: F
17.You are performing a routine equipment inspection and find material re- quiring additional parts
or components to complete the end item prior to issue, which supply condition code (SCC) do you
assign?: G
18.Which supply condition tag would you use to identify a condemned G-suit awaiting pickup from
supply?: DD Form 1577
19.The expendability, recoverability, reparability cost (ERRC) designator code that identifies due-in
from maintenance (DIFM) items is...: XD
20.Which Department of Defense (DOD) and Air Force (AF) forms are used when requesting an
item that does not have a federal stock number (FSN) assigned or additional information is
necessary for procurement?: AF Form 2005 and DD Form 1348-6
21.What Air Force Instruction (AFI) requires your shop to have a budget?: AFI 11-301V1
22.We write our budgets for how many fiscal years in advance?: One
23.Operation and maintenance (O&M): What type of funding is used for expenses that your unit
, has to pay for?
24.Who is able to view the Air Force technical order (TO) catalog information about all active Air
Force TOs and view electronic technical orders through the Enhanced Technical Information
Management System (ETIMS)?: Air Force Portal users with a common access card (CAC)
25.Which screen displays the complete and real-time information for all tech- nical orders?: TO
Detail
26.Which technical order (TO) number indicates electronic or Internet access distribution through
the Enhanced Technical Information Management Sys- tem (ETIMS)?: TO 00-5-1-WA-1
27.Which Enhanced Technical Information Management System (ETIMS) fea- ture enables technical
order (TO) users to view properly formatted, numbered and indexed electronic technical orders (e-TO)
associated with the e-TO library accounts to which the have access?: TO Viewer
28.Where must electronic technical order (e-TO) content reside to allow an e-Tool to be
disconnected and taken to a point where the e-TO is needed?: - Physically on each e-Tool
29.When making a recommended change to a technical order, how must the change be identified?:
As an improvement or correction
30.Which publication provides detailed completion instructions for a recom- mended technical
order (TO) change?: TO 00-5-1
31.How are all technical time compliance technical order (TCTO) deficiencies submitted?: Urgent
32.Within how many calendar days after your submittal of a routine report must the technical
content manager (TCM) respond?: 45
33.Which form is used to document each discrepancy discovered by aircrew or maintenance
personnel noted before, during, and after each flight?: AFTO Form 781A
34.What documentation does aircrew flight equipment (AFE) personnel main- tain for all assigned
