Column - ANSWER The _________ acts as the spine of the drill press; it is
the main support of the machine.
b. Play; lead screw - ANSWER Backlash is the amount of _________ between
the threads of the ________ and the nut.
a. A countersink leaves a conical relief cut in the work surface. - ANSWER
What is the difference between countersinking and counterboring?
False - ANSWER True or False: The major advantage of using a V-block is to
have the secured workpiece perfectly aligned to the milling bit.
b. Carbide bit; slower - ANSWER According to the text, in making a dovetail
cut on a hardened steel slide, it is best to use a _______ bit and a ________ rate
of RPM.
a. A mill is only able to cut on the X- and Y-axis.
**b. None of the Above
c. A lathe is best used to cut on the Z-axis
d. A drill press is best used to cut on the X-axis. - ANSWER Which of the
following statements is true?
b. Tramming. - ANSWER Squaring the table to the chuck is called:
, a. Dial indicator - ANSWER According to the text, the only tool you will need
in order to square a vise is a:
False - ANSWER True or false: A mechanical edge finder is used when the
spindle is stationary.
160 - ANSWER For every _____ hours of lathe use, it is suggested to check
the electrical contacts, switches, and connections.
b. Live center. - ANSWER 160
a. Standard profile - ANSWER A _______ barrel starts around 1 inch, and is
eventually tapered down to a.700" at the end of the end of the muzzle.
True - ANSWER NEVER turn a reamer counterclockwise! For any reason!
You will dull it instantly.
c. None of the Above - ANSWER What is the main difference between a
finishing cutter and a rough cutter turning tool?
False - ANSWER True or false: Threading is a method of cutting workpiece
edges to create a beveled corner.
False - ANSWER It is NOT possible to chamber a barrel by hand.
False - ANSWER A higher spindle speed should be used when taking material
away from a high carbon steel surface than an aluminum surface.
the main support of the machine.
b. Play; lead screw - ANSWER Backlash is the amount of _________ between
the threads of the ________ and the nut.
a. A countersink leaves a conical relief cut in the work surface. - ANSWER
What is the difference between countersinking and counterboring?
False - ANSWER True or False: The major advantage of using a V-block is to
have the secured workpiece perfectly aligned to the milling bit.
b. Carbide bit; slower - ANSWER According to the text, in making a dovetail
cut on a hardened steel slide, it is best to use a _______ bit and a ________ rate
of RPM.
a. A mill is only able to cut on the X- and Y-axis.
**b. None of the Above
c. A lathe is best used to cut on the Z-axis
d. A drill press is best used to cut on the X-axis. - ANSWER Which of the
following statements is true?
b. Tramming. - ANSWER Squaring the table to the chuck is called:
, a. Dial indicator - ANSWER According to the text, the only tool you will need
in order to square a vise is a:
False - ANSWER True or false: A mechanical edge finder is used when the
spindle is stationary.
160 - ANSWER For every _____ hours of lathe use, it is suggested to check
the electrical contacts, switches, and connections.
b. Live center. - ANSWER 160
a. Standard profile - ANSWER A _______ barrel starts around 1 inch, and is
eventually tapered down to a.700" at the end of the end of the muzzle.
True - ANSWER NEVER turn a reamer counterclockwise! For any reason!
You will dull it instantly.
c. None of the Above - ANSWER What is the main difference between a
finishing cutter and a rough cutter turning tool?
False - ANSWER True or false: Threading is a method of cutting workpiece
edges to create a beveled corner.
False - ANSWER It is NOT possible to chamber a barrel by hand.
False - ANSWER A higher spindle speed should be used when taking material
away from a high carbon steel surface than an aluminum surface.
